engine needed! (northern California) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jeremy_5 · 01-29-2005, 09:22 PM

I started a machinest class and need a engine to perform the work on. Pretty much any engine will work. I don't have much money so before hitting up the junk yards I wanted to see if anyone had a old junk one lying around that was getting in the way

For now I don't even need a whole block, just a complete set of heads will work. This might be a long shot but if anyone has one let me know.

Purs · 01-29-2005, 09:49 PM

Jeremy, I had (have) a set of Big Block heads that I would've sent with you when you were here if I would've known. If you make another road trip let me know. I'll drag them out for you.

bigjimzlll · 01-29-2005, 09:54 PM

I have a 283 in a box if you want it.....

extd56 · 01-29-2005, 11:20 PM

I have a 350, it has one head on it. I will let it go for 50.00. I believe it is a standard bore. The block number is 3970010. I am also looking for an aluminum intake manifold.

extd56 · 01-30-2005, 12:06 AM

I think I have a set of heads I will throw in too if I still have them, will have to look.

scootergmc · 01-30-2005, 01:25 AM

I have a SB 350 (I believe) complete and assembled you can have for free. You must also take a set of Small Block 400 heads. The 350 ran when I drove it home and pulled it out. That was 5 years ago. Been stored in a garage since that time. If you feel like giving me something for it go ahead, but I don't really care. Just trying to help someone else out with something I don't need. Shoot me an email: scootergmc@yahoo.com

**kwmech** · 01-30-2005, 01:39 AM

I have a complete 305 chevy long block you can have if you come pick it up in Grasss Valley

zooza · 01-30-2005, 01:53 AM

good luck with your classes , I'm an industrial machinist with a lot of school and no on the job experience. ( couldnt take the cut in pay for changing jobs) But i've found my calling in law enforcement.
Enjoy those classes! we're all pullin' for ya!

scootergmc · 01-30-2005, 02:01 AM

And if you're really looking for stuff to do I have a TH400 2wd tranny and an SM465 2wd tranny. Both worked when removed. Interested in a 350 short block that got water down a hole? It's a machinist's dream...

bigjimzlll · 01-30-2005, 02:16 AM

Quote:

Originally Posted by extd56

I have a 350, it has one head on it. I will let it go for 50.00. I believe it is a standard bore. The block number is 3970010. I am also looking for an aluminum intake manifold.

I have a nice weiand stealth if you want to swap.

extd56 · 01-30-2005, 11:53 AM

any pictures?

scootergmc · 01-30-2005, 04:50 PM

Hey Jeremy 5: I posted an ad here in the classifieds so let me know asap if you want them.

Jeremy_5 · 01-30-2005, 05:22 PM

First off I want to thank everyone for the responses, I really appreciate you guys trying to help me out.

Brit: I wish I would have known when I came down to Texas too, but we weren't suppose to need an engine for this class, they were suposse to be supplied, but I guess the plans changed

bigjimzlll: I would love that little 283, I wish you weren't so far away. I would come and get it but I need the engine by this week.

scootergmc: I am sending you a pm about the engine.

Thanks to everyone for the offers!!!

**tnblazerk5** · 01-30-2005, 05:39 PM

heres a free one in cali
http://67-72chevytrucks.com/vboard/s....php3?t=138384

scootergmc · 01-30-2005, 05:40 PM

That's me. Jeremy 5, you have your reply. Email me.

scootergmc · 01-30-2005, 06:01 PM

Hey Jeremy: I have a guy right behind you. If I don't hear from you by 2:30pm, this guy gets it all. I PM'd you my cell. I'll PM again.

01-29-2005, 09:22 PM	#1
Jeremy_5 Truck addict Join Date: Sep 2003 Location: Lincoln, California Posts: 497	engine needed! (northern California) I started a machinest class and need a engine to perform the work on. Pretty much any engine will work. I don't have much money so before hitting up the junk yards I wanted to see if anyone had a old junk one lying around that was getting in the way For now I don't even need a whole block, just a complete set of heads will work. This might be a long shot but if anyone has one let me know. __________________ 1956 Chevy Napco 1972 Cheyenne Super 1970 K20 Last edited by Jeremy_5; 01-29-2005 at 09:24 PM.

01-29-2005, 09:49 PM	#2
Purs Got Big Block? Join Date: Apr 2000 Location: West Texas Posts: 1,510	Jeremy, I had (have) a set of Big Block heads that I would've sent with you when you were here if I would've known. If you make another road trip let me know. I'll drag them out for you. __________________ "Experience is what you get when you didn't get what you wanted."

01-29-2005, 09:54 PM	#3
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	I have a 283 in a box if you want it..... __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

01-29-2005, 11:20 PM	#4
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	I have a 350, it has one head on it. I will let it go for 50.00. I believe it is a standard bore. The block number is 3970010. I am also looking for an aluminum intake manifold. Attached Images Last edited by extd56; 01-29-2005 at 11:55 PM.

01-30-2005, 02:01 AM	#9
scootergmc Registered User Join Date: Aug 2003 Location: Galt, CA Posts: 16	And if you're really looking for stuff to do I have a TH400 2wd tranny and an SM465 2wd tranny. Both worked when removed. Interested in a 350 short block that got water down a hole? It's a machinist's dream... Last edited by scootergmc; 01-30-2005 at 05:21 PM.

01-30-2005, 12:06 AM	#5
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	I think I have a set of heads I will throw in too if I still have them, will have to look.

01-30-2005, 01:25 AM	#6
scootergmc Registered User Join Date: Aug 2003 Location: Galt, CA Posts: 16	I have a SB 350 (I believe) complete and assembled you can have for free. You must also take a set of Small Block 400 heads. The 350 ran when I drove it home and pulled it out. That was 5 years ago. Been stored in a garage since that time. If you feel like giving me something for it go ahead, but I don't really care. Just trying to help someone else out with something I don't need. Shoot me an email: scootergmc@yahoo.com

01-30-2005, 01:39 AM	#7
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,630	I have a complete 305 chevy long block you can have if you come pick it up in Grasss Valley

01-30-2005, 01:53 AM	#8
zooza Registered User Join Date: Jul 2004 Location: LINDEN, TN. Posts: 260	good luck with your classes , I'm an industrial machinist with a lot of school and no on the job experience. ( couldnt take the cut in pay for changing jobs) But i've found my calling in law enforcement. Enjoy those classes! we're all pullin' for ya!

01-30-2005, 11:53 AM	#11
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	any pictures?

01-30-2005, 04:50 PM	#12
scootergmc Registered User Join Date: Aug 2003 Location: Galt, CA Posts: 16	Hey Jeremy 5: I posted an ad here in the classifieds so let me know asap if you want them.

01-30-2005, 05:22 PM	#13
Jeremy_5 Truck addict Join Date: Sep 2003 Location: Lincoln, California Posts: 497	First off I want to thank everyone for the responses, I really appreciate you guys trying to help me out. Brit: I wish I would have known when I came down to Texas too, but we weren't suppose to need an engine for this class, they were suposse to be supplied, but I guess the plans changed bigjimzlll: I would love that little 283, I wish you weren't so far away. I would come and get it but I need the engine by this week. scootergmc: I am sending you a pm about the engine. Thanks to everyone for the offers!!! __________________ 1956 Chevy Napco 1972 Cheyenne Super 1970 K20

01-30-2005, 05:39 PM	#14
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	heres a free one in cali http://67-72chevytrucks.com/vboard/s....php3?t=138384

01-30-2005, 05:40 PM	#15
scootergmc Registered User Join Date: Aug 2003 Location: Galt, CA Posts: 16	That's me. Jeremy 5, you have your reply. Email me.

01-30-2005, 06:01 PM	#16
scootergmc Registered User Join Date: Aug 2003 Location: Galt, CA Posts: 16	Hey Jeremy: I have a guy right behind you. If I don't hear from you by 2:30pm, this guy gets it all. I PM'd you my cell. I'll PM again.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.