I need a 3/4 or 1 ton rearend - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Nick's683/4 · 02-01-2005, 03:18 AM

I am looking for a ho52 or a 14 built 1 ton rearend. They need to be in Norcal or up in Reno (i'm headed up there soon). They need to be 4:10 grears.

Thanks Nick

Jeremy_5 · 02-01-2005, 05:05 AM

I will look at my buddy's house and see if he has a 14 bolt, he has a bunch of axles laying around. I am on the way to Reno

extd56 · 02-01-2005, 10:38 AM

I will be pulling a 3/4 ton rear end out of a 67 GMC soon.

**67sss** · 02-01-2005, 03:11 PM

here's you go, and only 11 or 12 hours north of you.http://67-72chevytrucks.com/vboard/s....php3?t=129495

Nick's683/4 · 02-01-2005, 07:29 PM

jeremy let me know if he has one. I know somthing is going to happen to this rearend. I got a big right foot and to much power.

extd56 what do you want to sell it for?

67sss thanks for the info but i didnt want to drive that far. I would pay more in gas then i would for the whole truck.

extd56 · 02-01-2005, 07:31 PM

250.00 for the rearend. It is still in the truck.

Nick's683/4 · 02-01-2005, 07:50 PM

what rearend is it? what grears? locker? and any pics?

Thanks Nick

extd56 · 02-01-2005, 08:17 PM

I will take pictures of it tomorrow, it is up by Chico, I have run out of room at my house.

Nick's683/4 · 02-01-2005, 08:45 PM

Is it a 4X4 truck i might want to get a front end too

Jeremy_5 · 02-01-2005, 10:39 PM

nick, went out there today. I couldn't find one. Sorry

extd56 · 02-01-2005, 10:48 PM

It is a 2 wheel drive truck. I will be selling the front suspension too.

Nick's683/4 · 02-02-2005, 06:36 PM

I was looking for a dana 44 front end for a 4X4

Jeremy thsnks for looking. have you started puting your 454 in yet?

extd56 · 02-02-2005, 09:11 PM

Here is the picture of the rear end. I do not know the ratio until I get a chance to pull it out.

02-01-2005, 03:18 AM	#1
Nick's683/4 Registered User Join Date: Apr 2004 Location: Oakley CA Posts: 165	I need a 3/4 or 1 ton rearend I am looking for a ho52 or a 14 built 1 ton rearend. They need to be in Norcal or up in Reno (i'm headed up there soon). They need to be 4:10 grears. Thanks Nick __________________ 70 1 ton with a 454 and a 4 speed and a np205

02-01-2005, 05:05 AM	#2
Jeremy_5 Truck addict Join Date: Sep 2003 Location: Lincoln, California Posts: 497	I will look at my buddy's house and see if he has a 14 bolt, he has a bunch of axles laying around. I am on the way to Reno __________________ 1956 Chevy Napco 1972 Cheyenne Super 1970 K20

02-01-2005, 07:29 PM	#5
Nick's683/4 Registered User Join Date: Apr 2004 Location: Oakley CA Posts: 165	jeremy let me know if he has one. I know somthing is going to happen to this rearend. I got a big right foot and to much power. extd56 what do you want to sell it for? 67sss thanks for the info but i didnt want to drive that far. I would pay more in gas then i would for the whole truck. __________________ 70 1 ton with a 454 and a 4 speed and a np205

02-01-2005, 07:50 PM	#7
Nick's683/4 Registered User Join Date: Apr 2004 Location: Oakley CA Posts: 165	what rearend is it? what grears? locker? and any pics? Thanks Nick __________________ 70 1 ton with a 454 and a 4 speed and a np205

02-01-2005, 08:45 PM	#9
Nick's683/4 Registered User Join Date: Apr 2004 Location: Oakley CA Posts: 165	Is it a 4X4 truck i might want to get a front end too __________________ 70 1 ton with a 454 and a 4 speed and a np205

02-01-2005, 10:38 AM	#3
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	I will be pulling a 3/4 ton rear end out of a 67 GMC soon.

02-01-2005, 03:11 PM	#4
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,325	here's you go, and only 11 or 12 hours north of you.http://67-72chevytrucks.com/vboard/s....php3?t=129495

02-01-2005, 07:31 PM	#6
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	250.00 for the rearend. It is still in the truck.

02-01-2005, 08:17 PM	#8
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	I will take pictures of it tomorrow, it is up by Chico, I have run out of room at my house.

02-01-2005, 10:39 PM	#10
Jeremy_5 Truck addict Join Date: Sep 2003 Location: Lincoln, California Posts: 497	nick, went out there today. I couldn't find one. Sorry __________________ 1956 Chevy Napco 1972 Cheyenne Super 1970 K20

02-01-2005, 10:48 PM	#11
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	It is a 2 wheel drive truck. I will be selling the front suspension too.

02-02-2005, 06:36 PM	#12
Nick's683/4 Registered User Join Date: Apr 2004 Location: Oakley CA Posts: 165	I was looking for a dana 44 front end for a 4X4 Jeremy thsnks for looking. have you started puting your 454 in yet? __________________ 70 1 ton with a 454 and a 4 speed and a np205

02-02-2005, 09:11 PM	#13
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Here is the picture of the rear end. I do not know the ratio until I get a chance to pull it out. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.