WTB: upper and lower trim pieces - The 1947 - Present Chevrolet & GMC Truck Message Board Network

powell72 · 02-05-2005, 09:24 PM

I'm trying to get all the upper and lower trim back on my truck but I'm missing four pieces still-
-right side upper and lower cab corner
-upper fender spear
-passenger side lower bed trim in front of rear wheel
My truck is a shortbed but I will take longbed trim, I have shortened a couple of pieces already. I don't care if it's wood grain or black or if there are some dings in them. Thanks in advance.

**Ironhorse** · 02-05-2005, 09:34 PM

I can help out on the upper cab trim, have both the left and right upper narrow cab trim in black. Couple very small dings, would buff and paint up nice. Still have original mounting clips and nuts. $15 shipped if interested. May have some of the other pieces needed in parts shed. Can check tomorrow and get back with you on those.

powell72 · 02-05-2005, 11:38 PM

Please do, if they are the ones I need I'll take them.

**Ironhorse** · 02-06-2005, 07:45 PM

Chris, I found the two black painted upper right and left cab trim pieces and have a few other ones. Drivers's side upper painted black that has the key lock notch, cab lower left side wide trim in woodgrain and couple other pieces I think must be blazer. Can't do pics right now as the digital camera batteries are down. If you will send me your email address I can take some pics later this evening or tomorrow when I get home from work. Doing email pics they will be larger than posting on the board, at least with my limited computer skills.

**zeusflash** · 02-07-2005, 12:30 AM

I have a lower right trim piece for in front of the rear wheel. I belive that it is for a shortbed since it is too long for my Blazer and too short for my standard bed pickup. It is in fair shape,black center,has a few small dings which could be easily repaired. $10.00 plus shipping but I would rather trade for a lower rear left front fender molding (piece behind left front wheel) if possible. Let me know what you want to do.

powell72 · 02-07-2005, 02:36 AM

Ironhorse, pm sent, thanks.

powell72 · 02-07-2005, 02:39 AM

zeusflash, I have some doubles of pieces, let me see if the one you need is an extra I have.

badpeanut · 02-07-2005, 08:27 AM

powell72 has first dibs, but if anyone has any extra Blazer lower rear quarter panel trim for ahead of the wheel wells I need both sides.

**JIMs70GMC** · 02-07-2005, 10:39 AM

I have what's on my 71, look at the pics of the green truck in the sig link. I'm taking it all off, don't have any for the driver side front fender. It's a long bed.

powell72 · 02-08-2005, 12:35 AM

zeusflash, I checked my parts and I have the right side, sorry. I am still interested in your piece though.

**zeusflash** · 02-08-2005, 10:31 PM

Sounds good. I will box it up and figure out shipping cost. I will let you know when I get it done. Probably tomorrow.

**zeusflash** · 02-08-2005, 11:11 PM

Hi Chris,
Boxed up the molding. Give me a zip and I will calc shipping.

powell72 · 02-09-2005, 01:15 AM

80550-Thanks.

**zeusflash** · 02-09-2005, 01:43 AM

Hi Chris,
UPS calculator says $10.91. Seems high to me. You still interested,I didn't think it would be that much.
Mike

powell72 · 02-09-2005, 01:50 AM

Still interested, how would you like payment?

02-05-2005, 09:24 PM	#1
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	WTB: upper and lower trim pieces I'm trying to get all the upper and lower trim back on my truck but I'm missing four pieces still- -right side upper and lower cab corner -upper fender spear -passenger side lower bed trim in front of rear wheel My truck is a shortbed but I will take longbed trim, I have shortened a couple of pieces already. I don't care if it's wood grain or black or if there are some dings in them. Thanks in advance. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

02-05-2005, 09:34 PM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,154	I can help out on the upper cab trim, have both the left and right upper narrow cab trim in black. Couple very small dings, would buff and paint up nice. Still have original mounting clips and nuts. $15 shipped if interested. May have some of the other pieces needed in parts shed. Can check tomorrow and get back with you on those. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

02-05-2005, 11:38 PM	#3
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Please do, if they are the ones I need I'll take them. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

02-06-2005, 07:45 PM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,154	Chris, I found the two black painted upper right and left cab trim pieces and have a few other ones. Drivers's side upper painted black that has the key lock notch, cab lower left side wide trim in woodgrain and couple other pieces I think must be blazer. Can't do pics right now as the digital camera batteries are down. If you will send me your email address I can take some pics later this evening or tomorrow when I get home from work. Doing email pics they will be larger than posting on the board, at least with my limited computer skills. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

02-07-2005, 12:30 AM	#5
zeusflash Senior Member Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 691	Side trim I have a lower right trim piece for in front of the rear wheel. I belive that it is for a shortbed since it is too long for my Blazer and too short for my standard bed pickup. It is in fair shape,black center,has a few small dings which could be easily repaired. $10.00 plus shipping but I would rather trade for a lower rear left front fender molding (piece behind left front wheel) if possible. Let me know what you want to do. __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4

02-07-2005, 02:36 AM	#6
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Ironhorse, pm sent, thanks. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

02-07-2005, 02:39 AM	#7
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	zeusflash, I have some doubles of pieces, let me see if the one you need is an extra I have. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

02-07-2005, 08:27 AM	#8
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,756	powell72 has first dibs, but if anyone has any extra Blazer lower rear quarter panel trim for ahead of the wheel wells I need both sides.

02-07-2005, 10:39 AM	#9
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	I have what's on my 71, look at the pics of the green truck in the sig link. I'm taking it all off, don't have any for the driver side front fender. It's a long bed. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

02-08-2005, 12:35 AM	#10
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	zeusflash, I checked my parts and I have the right side, sorry. I am still interested in your piece though. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

02-08-2005, 10:31 PM	#11
zeusflash Senior Member Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 691	Lower bed molding Sounds good. I will box it up and figure out shipping cost. I will let you know when I get it done. Probably tomorrow. __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4

02-08-2005, 11:11 PM	#12
zeusflash Senior Member Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 691	Hi Chris, Boxed up the molding. Give me a zip and I will calc shipping. __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4

02-09-2005, 01:15 AM	#13
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	80550-Thanks. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

02-09-2005, 01:43 AM	#14
zeusflash Senior Member Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 691	Hi Chris, UPS calculator says $10.91. Seems high to me. You still interested,I didn't think it would be that much. Mike __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4

02-09-2005, 01:50 AM	#15
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Still interested, how would you like payment? __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.