Lookie waht I found - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1STtimePRo'71 · 02-07-2005, 09:06 PM

Looks like $300 bucks is all the old lady wants for it. It's starting to rust really bad. Not sure what motor, but she says its a big one

Does anybody know what year it is? I'm pretty sure it's 2wd. All I know is that it's cheap, dark green, and "runs pretty good". Any ideas would be nice.

Sorry such a bad picture, I'll try to get a better one tomorrow.

-Cory

Alexis · 02-07-2005, 09:08 PM

I say 71-72 cause the grill is open

matt_field · 02-07-2005, 09:08 PM

go check that out!, may be a good buy... where in minnesota are ya located at? im in Detroit Lakes

72gord · 02-07-2005, 09:08 PM

From the grille it looks like a 71 or 72, but hard to tell for sure. Cheap enough though!

1STtimePRo'71 · 02-07-2005, 09:14 PM

The grill has a big hole out of it and I just remembered that she said that the pass. door lock doesn't work(like that matters to me). But I think all in all it would have to be a parts truck because of how rusty the body is getting on it. 90 percent of the body is starting to go brown. I think it's too late to catch it before it gets any worse. At any rate I can use the steering stuff and have an extra set of just about anything I guess. But If it runs ok it would be worth the $300 though?

Matt I'm south of Mankato 15 miles. We should hook up sometime and tip a few back.

-Cory

Blue Beard · 02-07-2005, 09:16 PM

Well worth the price for a parts truck...

67ChevyC10Stepside · 02-07-2005, 09:30 PM

if it has a big block it's worth a lot more than that......

krue · 02-07-2005, 09:45 PM

If you can't use of sell $300 worth of stuff off of it you aren't trying.

SLS · 02-08-2005, 04:51 AM

1/2 Ton, eh?

Looks like a 71-72, that is if the front clip has not been swapped.

If so, you've probably got $300 worth of 5-lug DISC brake goodies on it.

SCORE!

Longhorn Man · 02-08-2005, 05:57 AM

Am I crazy, or does that look like a SWB?

Martin64 · 02-08-2005, 07:23 AM

You're crazy ...........and it does look like a SWB

Joe67 · 02-08-2005, 09:10 AM

Nice find! Drag it home already

donkey69 · 02-08-2005, 09:42 AM

I'd say buy 'er up! Let me know if you need any help....

silvertonguedevil · 02-08-2005, 10:36 AM

Quote:

Originally Posted by Longhorn Man

Am I crazy, or does that look like a SWB?

I was thinkin' the same thing!

hotrodchev · 02-08-2005, 11:15 AM

Hey Cory,

Your truck looks familiar to me. Is that the same '72 3/4-ton 4x4 with 350, 4-spd. and tachometer that was on Carsoup.com a short while back for $700? I talked to the seller about a month ago and it sounded like a good buy for the money.

Tim
Lino Lakes, MN.

1STtimePRo'71 · 02-08-2005, 11:32 AM

Yes, the same truck!

shortymac83 · 02-08-2005, 12:51 PM

that's a good deal. I got mine for $300, and it's a lot worse than Ithought it was, but I'd still pay $300 for it again, if I had the chance.

67ChevyC10Stepside · 02-08-2005, 01:11 PM

iit has tach and you are questioning 300 bucks? what's wrong with you boy?

**FRENCHBLUE72** · 02-08-2005, 06:52 PM

Have you scored that ride yet that is sounding like one hellva deal..

CHEVYE · 02-08-2005, 07:37 PM

it`d be in the driveway already if it were me,

and this would be more of a "hey look what i just got for $300" thread

1STtimePRo'71 · 02-08-2005, 07:48 PM

Patience, patience. This nice old lady doesnt know if she wants to sell her hubbies old truck or give it to one of the grandkids. I've been itchin too, hardly slept lastnite. She was supposed to make up her mind today but I cant get ahold of her. You guys will know that I bought it before my old lady does, dont worry about that!

*Shane* · 02-08-2005, 08:11 PM

Hell's Bells ... I have paid more money for "parts trucks" that didn't run.

RUN, don't walk, to that ol' lady and pay her!

1STtimePRo'71 · 02-08-2005, 08:58 PM

I've already got $150 in parts into my new truck. Still got another $200 left to buy!

Thank got I gotta bunch of money saved up.

02-07-2005, 09:06 PM	#1
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	Lookie waht I found Looks like $300 bucks is all the old lady wants for it. It's starting to rust really bad. Not sure what motor, but she says its a big one Does anybody know what year it is? I'm pretty sure it's 2wd. All I know is that it's cheap, dark green, and "runs pretty good". Any ideas would be nice. Sorry such a bad picture, I'll try to get a better one tomorrow. -Cory Attached Images

02-07-2005, 09:08 PM	#3
matt_field Registered User Join Date: Apr 2001 Location: Detroit Lakes, Minnesota Posts: 885	go check that out!, may be a good buy... where in minnesota are ya located at? im in Detroit Lakes __________________ 1971 k5 blazer 80k mike survivor 1972 3/4 ton 4wd Cummins 12v 1967 swb 2wd 427bbc 1968 4wd shortbox 1971 Cheyenne swb k10 unrestored 1971 Cheyenne super 40k 402bb survivor 1967 Chevy k10 (first truck) 1968 L78 camaro survivor 18k miles 1969 z28 survivor 60k miles 1969 z28 survivor 39k miles 1969 z28 rs survivor 80k miles

02-07-2005, 09:16 PM	#6
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	Well worth the price for a parts truck... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

02-07-2005, 09:30 PM	#7
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	if it has a big block it's worth a lot more than that...... __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

02-07-2005, 09:45 PM	#8
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	If you can't use of sell $300 worth of stuff off of it you aren't trying. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

02-07-2005, 09:08 PM	#2
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,879	I say 71-72 cause the grill is open

02-07-2005, 09:08 PM	#4
72gord Never enough time!! Join Date: Mar 2004 Location: sw Wisconsin Posts: 602	From the grille it looks like a 71 or 72, but hard to tell for sure. Cheap enough though!

02-07-2005, 09:14 PM	#5
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	The grill has a big hole out of it and I just remembered that she said that the pass. door lock doesn't work(like that matters to me). But I think all in all it would have to be a parts truck because of how rusty the body is getting on it. 90 percent of the body is starting to go brown. I think it's too late to catch it before it gets any worse. At any rate I can use the steering stuff and have an extra set of just about anything I guess. But If it runs ok it would be worth the $300 though? Matt I'm south of Mankato 15 miles. We should hook up sometime and tip a few back. -Cory

02-08-2005, 04:51 AM	#9
SLS Finish the'71..or bust! Join Date: Jun 2003 Location: Nashville, TN. Posts: 441	1/2 Ton, eh? Looks like a 71-72, that is if the front clip has not been swapped. If so, you've probably got $300 worth of 5-lug DISC brake goodies on it. SCORE!

02-08-2005, 05:57 AM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Am I crazy, or does that look like a SWB?

02-08-2005, 07:23 AM	#11
Martin64 Registered User Join Date: Oct 2003 Location: Yuma, Az Posts: 477	You're crazy ...........and it does look like a SWB __________________ Martin Gibson USAF Retired 1964(-ish) C10

02-08-2005, 09:10 AM	#12
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Nice find! Drag it home already __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

02-08-2005, 09:42 AM	#13
donkey69 JB-80 &quot;Twice as Good&quot; Join Date: Jun 2004 Location: Central, MN Posts: 354	I'd say buy 'er up! Let me know if you need any help.... __________________ HEY NOW!

02-08-2005, 11:15 AM	#15
hotrodchev Registered User Join Date: Nov 2002 Posts: 51	Hey Cory, Your truck looks familiar to me. Is that the same '72 3/4-ton 4x4 with 350, 4-spd. and tachometer that was on Carsoup.com a short while back for $700? I talked to the seller about a month ago and it sounded like a good buy for the money. Tim Lino Lakes, MN.

02-08-2005, 11:32 AM	#16
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	Yes, the same truck!



Register or Log In To remove these advertisements.

02-08-2005, 12:51 PM	#17
shortymac83 hmm... Join Date: Jan 2004 Location: Culver, Indiana Posts: 1,631	that's a good deal. I got mine for $300, and it's a lot worse than Ithought it was, but I'd still pay $300 for it again, if I had the chance. __________________ 1983 Oldsmobile Delta 88 1967 Chevy C-10 stripper www.fcrperformance.com - wanna go...faster? talk to FCR.

02-08-2005, 01:11 PM	#18
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	iit has tach and you are questioning 300 bucks? what's wrong with you boy? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

02-08-2005, 06:52 PM	#19
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,604	Have you scored that ride yet that is sounding like one hellva deal.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

02-08-2005, 07:37 PM	#20
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	it`d be in the driveway already if it were me, and this would be more of a "hey look what i just got for $300" thread __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

02-08-2005, 07:48 PM	#21
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	Patience, patience. This nice old lady doesnt know if she wants to sell her hubbies old truck or give it to one of the grandkids. I've been itchin too, hardly slept lastnite. She was supposed to make up her mind today but I cant get ahold of her. You guys will know that I bought it before my old lady does, dont worry about that!

02-08-2005, 08:11 PM	#22
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Hell's Bells ... I have paid more money for "parts trucks" that didn't run. RUN, don't walk, to that ol' lady and pay her!

02-08-2005, 08:58 PM	#23
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	I've already got $150 in parts into my new truck. Still got another $200 left to buy! Thank got I gotta bunch of money saved up.

Register or Log In To remove these advertisements.