|
02-08-2005, 12:59 AM
|
#1 |
|
Registered User
Join Date: Mar 2004
Location: Butler PA
Posts: 3,032
|
wth man?
im taking the old crappy step bed apart and got everything off except the rear brace....took all the bolts out and found a weld on the angle iron pictured so being the gentle person i am i got a hammer and beat the piss out of it till it broke....then i tried yanking it apart to no avail......what am i missing? as you can see from the pics i took the hammer to it pretty good.....
__________________
67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt. |
|
|
|
02-08-2005, 01:00 AM
|
#2 |
|
Registered User
Join Date: Mar 2004
Location: Butler PA
Posts: 3,032
|
another one......
__________________
67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt. |
|
|
|
|
02-08-2005, 01:39 AM
|
#3 |
|
Registered User
Join Date: Mar 2004
Location: Butler PA
Posts: 3,032
|
well i figured it out......in the fifth pic go down off screen and there were two little welds....i took my chisel to the one and got it broke...the other one is too far back in to get to so i dont know what im gonna do...
__________________
67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt. |
|
|
|
|
02-08-2005, 01:44 AM
|
#4 |
|
Professional Grade
Join Date: May 2003
Location: Fort McMurray, Alberta
Posts: 7,915
|
Ford wrench?
__________________
1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) |
|
|
|
|
02-08-2005, 02:09 AM
|
#5 |
|
Registered User
Join Date: Mar 2004
Location: Butler PA
Posts: 3,032
|
what's that mean?
__________________
67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt. |
|
|
|
|
02-08-2005, 02:09 AM
|
#6 |
|
Registered User
Join Date: Mar 2004
Location: Butler PA
Posts: 3,032
|
is that what your calling the chisel?
__________________
67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
