Shoulder belts for my 72? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Daubs** · 02-11-2005, 06:07 PM

The kiddos want to ride in the 72 and I'm thinking shoulder belts would be good (and safe for me also).

Anyone done this mod? Things to watch out for? Suggestions of vendors?

Retractable would be ideal, but I could live with non-retract. Thanks, D.

**Daubs** · 02-12-2005, 11:35 AM

ttt

sdkid · 02-12-2005, 12:01 PM

Do a search. There are several threads about newer fullsize and s-10 retro fits. Factory shoulder belts are pretty hard to find.

cali_surfer · 02-12-2005, 01:52 PM

Probably the cheapest route would be to find some S-10 belts and put them in. I don't have access to any decent wrecking yards around here, so I went to the aftermarket and bought some belts. Pricey yes, at $99 each (ouch!) but they went in no problem. Got 3-point belts from Julianos. All I had to do was drill a new hole in the floor for the retractor mechanism, reuse the hole in the middle of the floor, and there is a threaded insert that exists in the pillar of the cab.

Bill72BB · 02-12-2005, 02:17 PM

I've got the S10's in BB . if you have many large friend like i do you will need to get a seat belt extender for the passanger , ( they are free at the Chevy dealer )
Here is a place that has some aftermarket , Truck Stop 714 870-7920 ,they run about 180 a pair .

02-11-2005, 06:07 PM	#1
Daubs Registered User Join Date: Jan 2005 Location: Eastern Nebraska Posts: 611	Shoulder belts for my 72? The kiddos want to ride in the 72 and I'm thinking shoulder belts would be good (and safe for me also). Anyone done this mod? Things to watch out for? Suggestions of vendors? Retractable would be ideal, but I could live with non-retract. Thanks, D. __________________ '72 Chevy K-20 Crate 350, SM465, 4.10's

02-12-2005, 11:35 AM	#2
Daubs Registered User Join Date: Jan 2005 Location: Eastern Nebraska Posts: 611	ttt __________________ '72 Chevy K-20 Crate 350, SM465, 4.10's

02-12-2005, 01:52 PM	#4
cali_surfer Registered User Join Date: Jun 2000 Location: Chico, CA Posts: 1,136	Probably the cheapest route would be to find some S-10 belts and put them in. I don't have access to any decent wrecking yards around here, so I went to the aftermarket and bought some belts. Pricey yes, at $99 each (ouch!) but they went in no problem. Got 3-point belts from Julianos. All I had to do was drill a new hole in the floor for the retractor mechanism, reuse the hole in the middle of the floor, and there is a threaded insert that exists in the pillar of the cab. __________________ My engine is stock... trust me ;o)

02-12-2005, 02:17 PM	#5
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,980	I've got the S10's in BB . if you have many large friend like i do you will need to get a seat belt extender for the passanger , ( they are free at the Chevy dealer ) Here is a place that has some aftermarket , Truck Stop 714 870-7920 ,they run about 180 a pair . Attached Images __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

02-12-2005, 12:01 PM	#3
sdkid Registered User Join Date: Sep 2004 Location: Pierre SD Posts: 1,533	Do a search. There are several threads about newer fullsize and s-10 retro fits. Factory shoulder belts are pretty hard to find.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.