Fiberglass inner fenders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jims69 · 02-13-2005, 12:51 AM

I don't know if any one has these but a fellow near my house makes fiberglass inner fenders for our trucks. If any one is interested i can look into getting these. I have a pair that I will take pics of tomorrow and post.

mcubedntx · 02-13-2005, 01:04 AM

Sounds Great to me

67ChevyC10Stepside · 02-13-2005, 02:45 AM

i have one inner fender but it's not very nice...how nice are his and how much?

MOTHERTRUCKERS · 02-13-2005, 09:08 AM

Are they any better or cheaper than US BODY inners?

jims69 · 02-13-2005, 01:23 PM

Here aree some pics of mine i'll get a price on them tomorrow.

Longhorn Man · 02-13-2005, 02:28 PM

Very interesting. How is the fit/finish of them? where are you located?

wannabeburbowner · 02-13-2005, 03:32 PM

I may also me interested in them....all depends on fit and price.

70chevc10 · 02-13-2005, 04:18 PM

yeah im posibly interested too.. one of my inner fenders has some rust goin on...

. let us know a price and how well they fit.

72ChevyRock · 02-14-2005, 11:46 AM

Hello from Andrews AFB, MD. I have just finished working on my driver's side inner and don't even want to start on my passenger side. I am very interested in the glass fenders. Price and shipping costs would be awesome to have. It will give me something to save for. Also, would there be any chance of receiving a military discount? I can always hope can't I?

**JIMs70GMC** · 02-14-2005, 12:59 PM

I'm also interested.

jims69 · 02-14-2005, 05:57 PM

I called the man who makes them today he told me they were $100 a set, as far as fit I am not sure Ihaven't installed mine and probably woln't for some time as my truck is torn apart and doubt that it will be back together anytime soon. Some of my friends have put them on the 73-87's and they fit ok.
The company that sells them is Fibercast Products he also has some of our truck parts laying around. His number is 724-948-3309

67ChevyC10Stepside · 02-14-2005, 06:05 PM

that's my area code.....where are they located?

jims69 · 02-14-2005, 11:17 PM

The inners are at a place called Fibercast products in Prosperity PA. about 15 min out of Washington.

sdkid · 02-15-2005, 12:03 AM

Anyone care to guess at shipping to 57501. How much would they weigh?

shane's67 · 02-16-2005, 02:59 PM

can you get a phone # or adress or email thanks

Putter · 02-16-2005, 03:52 PM

Quote:

Originally Posted by jims69

The company that sells them is Fibercast Products he also has some of our truck parts laying around. His number is 724-948-3309

Hope that helps.....

rmrtndl · 02-16-2005, 09:32 PM

Quote:

Originally Posted by jims69

Some of my friends have put them on the 73-87's and they fit ok.

Did I read that correctly? Is it true that the inner fenders from 73-87's fit the 67-72's?

72ChevyRock · 02-17-2005, 11:33 AM

I want a pair. I am located on Andrews AFB, MD about 2 hours from Whitetail Mountain Ski Resort. I will call soon to get more details about shipping. I may just make a trip up there and pick up a pair. If I find out anymore information, I'll post it.

jims69 · 02-17-2005, 06:48 PM

No he makes two different sets, I know people with the 73-87 style that have them installed.

ratrod67 · 02-17-2005, 07:19 PM

Just to add a little to the post.

I had a 69 Camaro with Harwood fiberglass inner fenders and had them smoothed and painted body color. I was driving on the freeway about 60 or so and ran through some gravel. I ended up with about 10 or so cracks where the rocks hit. Called Harwood and was told that the fiberglass parts were usually used for drag race or show type vehicles and there was no warranty. Ended up pulling them out and replacing them with steel.

sdkid · 02-17-2005, 11:12 PM

Quote:

Originally Posted by ratrod67

Just to add a little to the post.

I had a 69 Camaro with Harwood fiberglass inner fenders and had them smoothed and painted body color. I was driving on the freeway about 60 or so and ran through some gravel. I ended up with about 10 or so cracks where the rocks hit. Called Harwood and was told that the fiberglass parts were usually used for drag race or show type vehicles and there was no warranty. Ended up pulling them out and replacing them with steel.

Would it help to coat the side toward the road with a spray type coating? I work at an auto dealer and our body shop sprays box liners. I wonder if that would stop the cracking.

02-13-2005, 12:51 AM	#1
jims69 Registered User Join Date: Feb 2005 Posts: 82	Fiberglass inner fenders I don't know if any one has these but a fellow near my house makes fiberglass inner fenders for our trucks. If any one is interested i can look into getting these. I have a pair that I will take pics of tomorrow and post. __________________ Jim SW PA. 69' GMC SWB 4X4 (in progress). 86' GMC LWB 4X4 (daily) 86' Chevy LWB 4X4 (beater)

02-13-2005, 01:04 AM	#2
mcubedntx Registered User Join Date: Sep 2002 Location: West Texas Posts: 54	Count me in Sounds Great to me __________________ Just a NOVICE who thinks this is the BEST board on the WEB!!

02-13-2005, 02:45 AM	#3
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	i have one inner fender but it's not very nice...how nice are his and how much? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

02-13-2005, 09:08 AM	#4
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Are they any better or cheaper than US BODY inners? __________________ Rest in Peace Ed. Thanks for all the good times.

02-13-2005, 01:23 PM	#5
jims69 Registered User Join Date: Feb 2005 Posts: 82	Here aree some pics of mine i'll get a price on them tomorrow. Attached Images __________________ Jim SW PA. 69' GMC SWB 4X4 (in progress). 86' GMC LWB 4X4 (daily) 86' Chevy LWB 4X4 (beater)

02-13-2005, 02:28 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Very interesting. How is the fit/finish of them? where are you located?

02-13-2005, 03:32 PM	#7
wannabeburbowner Registered User Join Date: Dec 2004 Location: New Philadelphia, Ohio Posts: 253	I may also me interested in them....all depends on fit and price. __________________ 71 Chevy Long Bed (gettin' bagged) 84 GMC K1500 (Sold) 85 Monte Carlo SS white w/gray int. (being a dumba** and totaled it ) 85 Monte Carlo SS clone T-top (Sold) 72 Chevelle-tubbed 64 Buick Sportwagon

02-13-2005, 04:18 PM	#8
70chevc10 Registered User Join Date: Jun 2004 Location: Puyallup, WA Posts: 535	yeah im posibly interested too.. one of my inner fenders has some rust goin on... . let us know a price and how well they fit.

02-14-2005, 11:46 AM	#9
72ChevyRock Registered User Join Date: Jul 2004 Location: Albuquerque, NM Posts: 55	Also interested in the fiberglass fenders. Hello from Andrews AFB, MD. I have just finished working on my driver's side inner and don't even want to start on my passenger side. I am very interested in the glass fenders. Price and shipping costs would be awesome to have. It will give me something to save for. Also, would there be any chance of receiving a military discount? I can always hope can't I? __________________ Primer Gray 72 LWB w/a 307

02-14-2005, 12:59 PM	#10
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	I'm also interested. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

02-14-2005, 05:57 PM	#11
jims69 Registered User Join Date: Feb 2005 Posts: 82	I called the man who makes them today he told me they were $100 a set, as far as fit I am not sure Ihaven't installed mine and probably woln't for some time as my truck is torn apart and doubt that it will be back together anytime soon. Some of my friends have put them on the 73-87's and they fit ok. The company that sells them is Fibercast Products he also has some of our truck parts laying around. His number is 724-948-3309 __________________ Jim SW PA. 69' GMC SWB 4X4 (in progress). 86' GMC LWB 4X4 (daily) 86' Chevy LWB 4X4 (beater)

02-14-2005, 06:05 PM	#12
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	that's my area code.....where are they located? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

02-14-2005, 11:17 PM	#13
jims69 Registered User Join Date: Feb 2005 Posts: 82	The inners are at a place called Fibercast products in Prosperity PA. about 15 min out of Washington. __________________ Jim SW PA. 69' GMC SWB 4X4 (in progress). 86' GMC LWB 4X4 (daily) 86' Chevy LWB 4X4 (beater)

02-15-2005, 12:03 AM	#14
sdkid Registered User Join Date: Sep 2004 Location: Pierre SD Posts: 1,533	Anyone care to guess at shipping to 57501. How much would they weigh?

02-16-2005, 02:59 PM	#15
shane's67 Registered User Join Date: Feb 2005 Location: berea,ky. Posts: 16	inner fenders can you get a phone # or adress or email thanks



Register or Log In To remove these advertisements.

02-17-2005, 11:33 AM	#18
72ChevyRock Registered User Join Date: Jul 2004 Location: Albuquerque, NM Posts: 55	I want a pair. I am located on Andrews AFB, MD about 2 hours from Whitetail Mountain Ski Resort. I will call soon to get more details about shipping. I may just make a trip up there and pick up a pair. If I find out anymore information, I'll post it. __________________ Primer Gray 72 LWB w/a 307

02-17-2005, 06:48 PM	#19
jims69 Registered User Join Date: Feb 2005 Posts: 82	No he makes two different sets, I know people with the 73-87 style that have them installed. __________________ Jim SW PA. 69' GMC SWB 4X4 (in progress). 86' GMC LWB 4X4 (daily) 86' Chevy LWB 4X4 (beater)

02-17-2005, 07:19 PM	#20
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,269	Just to add a little to the post. I had a 69 Camaro with Harwood fiberglass inner fenders and had them smoothed and painted body color. I was driving on the freeway about 60 or so and ran through some gravel. I ended up with about 10 or so cracks where the rocks hit. Called Harwood and was told that the fiberglass parts were usually used for drag race or show type vehicles and there was no warranty. Ended up pulling them out and replacing them with steel.

Register or Log In To remove these advertisements.