Whats this for? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tmad · 02-13-2005, 01:16 PM

Hey Folks! I need your help! Can someone tell me what this hole is for and where I might be able to get a plug for it? Looking at the front of the truck it is to the left of steering shaft and slightly lower! This is a 67 2wd lwb 283 auto. And while Im here where can I get the noise and heat barrier for the cab floor of these trucks? Thanks in advance! Todd

gonebad2 · 02-13-2005, 01:32 PM

The clutch pushrod passed through that hole on manually equipped trucks.

Rollie396 · 02-13-2005, 01:34 PM

correct me if I'm wrong,but I believe that's the hole for the clutch linkage to pass through.If you had an automatic from the factory,there was a little plate (that I can't find my picture of) screwed over it.

70c10swb · 02-13-2005, 01:34 PM

that looks like the hole for the clutch linkage.
as for the other questions... i dont know

for a noise/heat barier i would look at something like dynomat

edit: wow im a slow typer, you all beat me

Rollie396 · 02-13-2005, 01:35 PM

and gonebad2 wins by a nose!

gonebad2 · 02-13-2005, 01:45 PM

Somewhere around here I have a few of the factory coverplates. If a pic isn't posted, I'll see if I can do it.

68w/sbc406 · 02-13-2005, 02:09 PM

well shoot if you have a few, are you selling? tmad gets the first one if you are (its his thread) but if you have a second one to id be interested

Longhorn Man · 02-13-2005, 02:15 PM

I managed to sell this one for 15 bucks after a quick run through the sand blaster and some nice paint.
You could easily make one our of some scrap metal or alluminum.
Hmmm...Maybe I can cut out a hand full and sell them....

gonebad2 · 02-13-2005, 02:27 PM

Quote:

Originally Posted by 68w/sbc406

well shoot if you have a few, are you selling? tmad gets the first one if you are (its his thread) but if you have a second one to id be interested

I did some digging but only came up with one. I'll check my junkyard toolbag. I always pull em when I see em. Let t-mad answer in the thread if he wants it or not (no pm's). If he doesn't want it, it's yours. The one I found has not been sandblasted or painted but it's in good shape. $2.00 via paypal to cover shipping and an envelope will get it there....

Tx Firefighter · 02-13-2005, 02:31 PM

If someone will make a paper template of one and send it to me, I'll make some up for folks who need them.

Rollie396 · 02-13-2005, 03:30 PM

one thing to consider though if making them,the original has bout a 1/16" lip around the edge.Prolly not a big deal for most.
If you want TX I could email a pic of it with dimensions,you could adjust the size of the pic if needed,print and cut out a template.
Ah hell it'd be easier to just make one and snail mail it to ya

.PM me your addy if you wanna do it.

Striker169 · 02-13-2005, 03:46 PM

Dam I need one of those too!

longhorn71 · 02-13-2005, 04:15 PM

Quote:

Originally Posted by Striker169

Dam I need one of those too!

give me a few mintunes and i will see if one of my parts trucks have one
just checked and i do have one if you need.

tmad · 02-13-2005, 04:25 PM

Ill Take it gonebad. If ya want maybe make some templates for the other guys! Pm me with the paypal details. Thanks again!

gonebad2 · 02-13-2005, 05:30 PM

Thanks tmad....... pm sent

Rod · 02-13-2005, 05:31 PM

Don't forget the foamy type gasket with it too.

02-13-2005, 01:16 PM	#1
tmad Registered User Join Date: Nov 2001 Location: youngsville pa Posts: 166	Whats this for? Hey Folks! I need your help! Can someone tell me what this hole is for and where I might be able to get a plug for it? Looking at the front of the truck it is to the left of steering shaft and slightly lower! This is a 67 2wd lwb 283 auto. And while Im here where can I get the noise and heat barrier for the cab floor of these trucks? Thanks in advance! Todd Attached Images

02-13-2005, 01:32 PM	#2
gonebad2 Merciless Butcher Join Date: Oct 2003 Location: CC Nevada Posts: 1,447	The clutch pushrod passed through that hole on manually equipped trucks. __________________ Your Bought And Sold....I Got Your Soul!

02-13-2005, 01:34 PM	#3
Rollie396 someday it will be done! Join Date: Sep 2004 Location: Lloydminster,AB. Canada Posts: 1,620	correct me if I'm wrong,but I believe that's the hole for the clutch linkage to pass through.If you had an automatic from the factory,there was a little plate (that I can't find my picture of) screwed over it. __________________ '72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore. '80 LWB 2wd beater '67 GMC long fleet (cab donor) '66 long step (parked till it's turn comes around) '65 short step (parts truck that will donate it's bed and possibly frame to the '66) '06 Grand Prix wife's car (she hardly lets me touch it) my pics

02-13-2005, 01:34 PM	#4
70c10swb no brain no headache Join Date: Jan 2005 Location: Cape Cod MA Posts: 567	that looks like the hole for the clutch linkage. as for the other questions... i dont know for a noise/heat barier i would look at something like dynomat edit: wow im a slow typer, you all beat me __________________ 1996 GMC Sierra z71 1970 SWB 2wd (project)

02-13-2005, 01:35 PM	#5
Rollie396 someday it will be done! Join Date: Sep 2004 Location: Lloydminster,AB. Canada Posts: 1,620	and gonebad2 wins by a nose! __________________ '72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore. '80 LWB 2wd beater '67 GMC long fleet (cab donor) '66 long step (parked till it's turn comes around) '65 short step (parts truck that will donate it's bed and possibly frame to the '66) '06 Grand Prix wife's car (she hardly lets me touch it) my pics

02-13-2005, 01:45 PM	#6
gonebad2 Merciless Butcher Join Date: Oct 2003 Location: CC Nevada Posts: 1,447	Somewhere around here I have a few of the factory coverplates. If a pic isn't posted, I'll see if I can do it. __________________ Your Bought And Sold....I Got Your Soul!

02-13-2005, 02:09 PM	#7
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	well shoot if you have a few, are you selling? tmad gets the first one if you are (its his thread) but if you have a second one to id be interested __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

02-13-2005, 02:15 PM	#8
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	I managed to sell this one for 15 bucks after a quick run through the sand blaster and some nice paint. You could easily make one our of some scrap metal or alluminum. Hmmm...Maybe I can cut out a hand full and sell them....

02-13-2005, 02:31 PM	#10
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	If someone will make a paper template of one and send it to me, I'll make some up for folks who need them. __________________ I'm on the Instagram- @Gearhead_Kevin

02-13-2005, 03:30 PM	#11
Rollie396 someday it will be done! Join Date: Sep 2004 Location: Lloydminster,AB. Canada Posts: 1,620	one thing to consider though if making them,the original has bout a 1/16" lip around the edge.Prolly not a big deal for most. If you want TX I could email a pic of it with dimensions,you could adjust the size of the pic if needed,print and cut out a template. Ah hell it'd be easier to just make one and snail mail it to ya .PM me your addy if you wanna do it. __________________ '72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore. '80 LWB 2wd beater '67 GMC long fleet (cab donor) '66 long step (parked till it's turn comes around) '65 short step (parts truck that will donate it's bed and possibly frame to the '66) '06 Grand Prix wife's car (she hardly lets me touch it) my pics Last edited by Rollie396; 02-13-2005 at 03:42 PM.

02-13-2005, 03:46 PM	#12
Striker169 Car O'Holic Join Date: Jan 2005 Location: Austin, Tx. Posts: 692	Dam I need one of those too!

02-13-2005, 04:25 PM	#14
tmad Registered User Join Date: Nov 2001 Location: youngsville pa Posts: 166	Ill Take it gonebad. If ya want maybe make some templates for the other guys! Pm me with the paypal details. Thanks again!

02-13-2005, 05:30 PM	#15
gonebad2 Merciless Butcher Join Date: Oct 2003 Location: CC Nevada Posts: 1,447	Thanks tmad....... pm sent __________________ Your Bought And Sold....I Got Your Soul!

02-13-2005, 05:31 PM	#16
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Don't forget the foamy type gasket with it too. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.