FS: 4x4 Rearends and tranny w\case.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

big70chevy · 02-15-2005, 01:36 PM

These parts came from my '70 K20 and are all in great working order. I swapped out the rears and am going with an automatic tranny. The rearends could use a better set of drums on them but other than that they work fine. I need to get rid of them. Pick up only.

Front Dana 44 8 lug drum brake w/Spicer lockouts and 4.10s

Rear Eaton 8 lug drum brake with locker and 4.10s

Granny 4 spd with 205 transfer case.

I would like to have $225.00 for the set of rearends and $200.00 for the tranny and case.

da-burb · 02-15-2005, 03:41 PM

what shape is the ring gear in on the Eaton rear?

1969 GMC · 02-15-2005, 05:00 PM

Jims70GMC has been looking for a locker...ttt for him...;-)

**JIMs70GMC** · 02-15-2005, 07:43 PM

PM sent, thanks Adam. Are the spicer hubs blue, how much for just them? Not with standing the PM sent, Randy70C10 might want the whole center section from the eaton for the dually he bought from me. It weighs about 150lbs boxed.

big70chevy · 02-16-2005, 07:58 AM

Yeah, the lockouts are blue. If I don't sell the rearends as is, I will let you know a price on them.

big70chevy · 02-17-2005, 07:18 AM

Zoomy, I PM'd you........

**JIMs70GMC** · 02-17-2005, 09:31 PM

Would you sell the dust cover from the tranny? (the stamped metal piece that covers the bottom of the clutch/flywheel)

GMC71k20 · 02-17-2005, 09:35 PM

big70chevy, any pics of that truck in your avatar?

big70chevy · 02-18-2005, 06:54 AM

Sorry JIMs70GMC. I'm not going to part out the tranny. The rearends on the other hand I may end up doing. Granted I don't sell them complete as is.

Da-burb, I pulled the diff cover off the Eaton and checked out the ring gear. It looks great. You had asked if they were rusted up also. The thing is sitting nosed down. The top of the ring gear, from not being lubed in a while, has a tiny amount of light surface rust on a few of the teeth, just on the back side of the teeth only. Other than that it appears to be in great shape. Let me know if you are still wanting them. If not, Zoomy has asked about them.

GMC71k20, I will post some pics later for you.

big70chevy · 02-18-2005, 07:39 AM

GMC71k20,

Here is a link to my photo album. There is a pic of the truck from when I was driving it and some of it still in progress.

Hope no one is offended by the other pics.

http://photobucket.com/albums/v427/big70chevy/

GMC71k20 · 02-18-2005, 12:51 PM

awesome truck and some nice bucks too

big70chevy · 02-18-2005, 03:00 PM

Thanks. It's been a long project so far and I'm sure it's going to get longer. To me it will be well worth it though. I'm very much into the BIG 4x4's and what better year to have one as a high rider.

da-burb · 02-18-2005, 11:49 PM

consider yourself PM'ed

big70chevy · 02-21-2005, 01:25 PM

The rearends have been spoken for. If anything changes I will let those of you who inquired about them know. Thanks to everyone!!!!

02-15-2005, 01:36 PM	#1
big70chevy Tristan's monster truck!! Join Date: Jul 2004 Location: Milan, IN Posts: 87	FS: 4x4 Rearends and tranny w\case.... These parts came from my '70 K20 and are all in great working order. I swapped out the rears and am going with an automatic tranny. The rearends could use a better set of drums on them but other than that they work fine. I need to get rid of them. Pick up only. Front Dana 44 8 lug drum brake w/Spicer lockouts and 4.10s Rear Eaton 8 lug drum brake with locker and 4.10s Granny 4 spd with 205 transfer case. I would like to have $225.00 for the set of rearends and $200.00 for the tranny and case. __________________ 1970 K20, 15" lift, 44" Boggers, 14" Weld Scorpios, 5.13 gears. 1993 K1500 ext. cab Z-71 1984 GMC C30 dump

02-15-2005, 03:41 PM	#2
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	what shape is the ring gear in on the Eaton rear? __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

02-15-2005, 05:00 PM	#3
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	Jims70GMC has been looking for a locker...ttt for him...;-) __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

02-15-2005, 07:43 PM	#4
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	PM sent, thanks Adam. Are the spicer hubs blue, how much for just them? Not with standing the PM sent, Randy70C10 might want the whole center section from the eaton for the dually he bought from me. It weighs about 150lbs boxed. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

02-16-2005, 07:58 AM	#5
big70chevy Tristan's monster truck!! Join Date: Jul 2004 Location: Milan, IN Posts: 87	Yeah, the lockouts are blue. If I don't sell the rearends as is, I will let you know a price on them. __________________ 1970 K20, 15" lift, 44" Boggers, 14" Weld Scorpios, 5.13 gears. 1993 K1500 ext. cab Z-71 1984 GMC C30 dump

02-17-2005, 07:18 AM	#6
big70chevy Tristan's monster truck!! Join Date: Jul 2004 Location: Milan, IN Posts: 87	Zoomy, I PM'd you........ __________________ 1970 K20, 15" lift, 44" Boggers, 14" Weld Scorpios, 5.13 gears. 1993 K1500 ext. cab Z-71 1984 GMC C30 dump

02-17-2005, 09:31 PM	#7
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Would you sell the dust cover from the tranny? (the stamped metal piece that covers the bottom of the clutch/flywheel) __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

02-17-2005, 09:35 PM	#8
GMC71k20 Registered User Join Date: Aug 2002 Location: mass Posts: 1,277	big70chevy, any pics of that truck in your avatar?

02-18-2005, 06:54 AM	#9
big70chevy Tristan's monster truck!! Join Date: Jul 2004 Location: Milan, IN Posts: 87	Sorry JIMs70GMC. I'm not going to part out the tranny. The rearends on the other hand I may end up doing. Granted I don't sell them complete as is. Da-burb, I pulled the diff cover off the Eaton and checked out the ring gear. It looks great. You had asked if they were rusted up also. The thing is sitting nosed down. The top of the ring gear, from not being lubed in a while, has a tiny amount of light surface rust on a few of the teeth, just on the back side of the teeth only. Other than that it appears to be in great shape. Let me know if you are still wanting them. If not, Zoomy has asked about them. GMC71k20, I will post some pics later for you. __________________ 1970 K20, 15" lift, 44" Boggers, 14" Weld Scorpios, 5.13 gears. 1993 K1500 ext. cab Z-71 1984 GMC C30 dump

02-18-2005, 07:39 AM	#10
big70chevy Tristan's monster truck!! Join Date: Jul 2004 Location: Milan, IN Posts: 87	GMC71k20, Here is a link to my photo album. There is a pic of the truck from when I was driving it and some of it still in progress. Hope no one is offended by the other pics. http://photobucket.com/albums/v427/big70chevy/ __________________ 1970 K20, 15" lift, 44" Boggers, 14" Weld Scorpios, 5.13 gears. 1993 K1500 ext. cab Z-71 1984 GMC C30 dump

02-18-2005, 12:51 PM	#11
GMC71k20 Registered User Join Date: Aug 2002 Location: mass Posts: 1,277	awesome truck and some nice bucks too

02-18-2005, 03:00 PM	#12
big70chevy Tristan's monster truck!! Join Date: Jul 2004 Location: Milan, IN Posts: 87	Thanks. It's been a long project so far and I'm sure it's going to get longer. To me it will be well worth it though. I'm very much into the BIG 4x4's and what better year to have one as a high rider. __________________ 1970 K20, 15" lift, 44" Boggers, 14" Weld Scorpios, 5.13 gears. 1993 K1500 ext. cab Z-71 1984 GMC C30 dump

02-18-2005, 11:49 PM	#13
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	consider yourself PM'ed

02-21-2005, 01:25 PM	#14
big70chevy Tristan's monster truck!! Join Date: Jul 2004 Location: Milan, IN Posts: 87	The rearends have been spoken for. If anything changes I will let those of you who inquired about them know. Thanks to everyone!!!! __________________ 1970 K20, 15" lift, 44" Boggers, 14" Weld Scorpios, 5.13 gears. 1993 K1500 ext. cab Z-71 1984 GMC C30 dump



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.