FS: 70 SWB Frame w/disc - The 1947 - Present Chevrolet & GMC Truck Message Board Network

saxmo · 02-16-2005, 07:24 PM

I have a nice 1970 SWB frame from a step truck $150. Was blasted with a zero tip pressure at 3500# has some primer. Front disc with 5 lug. Rear still stock 6 lug. There is a 72 A/C cab that the frame buyer can have for free. Gotta get it quick before wife sends it to scrap metal guys.

Joe67 · 02-16-2005, 08:49 PM

Not a bad deal

72402 · 02-16-2005, 09:20 PM

Where is Cleveland, Texas?

saxmo · 02-16-2005, 09:24 PM

45 minutes north of Houston, on HWY 59

silvertonguedevil · 02-16-2005, 09:27 PM

Dern-it!! Why is this stuff always so far away?

72402 · 02-16-2005, 09:27 PM

Sorry, that's a little too far for me right now.

saxmo · 02-16-2005, 10:38 PM

here are some pix of the frame. I also am open to parts trading. I'll list parts I need in case someone wants to trade stuff out.

68 Chevy Fleetside Tailgate
68 Passenger front fender
69 Windshield
Tailgate trunions
Passenger outer rocker
TH400 tranny mount bracket
driveshaft for 1969 SWB C10 with 350/TH400
disk/drum proportioning valve
Radiator
TH400 kickdown shaft
Front chrome bumper
68 grille inserts

All of these parts are for same truck. I have a 69 cab with 68 front and steel fleet bed.

I'll post pix of the cab asap

saxmo · 02-16-2005, 11:02 PM

here are some more pix.

saxmo · 02-16-2005, 11:04 PM

even more pictures!

saxmo · 02-16-2005, 11:05 PM

last ones...

GlennBrittain · 02-18-2005, 02:50 AM

What condition is the 69 cab and bed in. I am about 2 hours N' up 59. I will be out for a few days , will try to contact you next week.

saxmo · 02-19-2005, 12:59 AM

for clarification: The frame is a 1970 SWB step bed truck frame. There are 2 cabs (free with frame purchase!) the white cab is the 1970 cab that was with the frame. The blue cab is a 1972 a/c cab that I had purchased seperately. I, personally, have $900 invested in this stuff, but must get rid of it asap. There is no bed for sale. It was in a picture, cause the cab was still with it. Thanks

dapolice1 · 02-19-2005, 04:25 AM

let me see if i can work travel out... how long you give me if i send funds now?

LUV2XCLR8 · 02-19-2005, 08:34 AM

I Remember That Truck From When It Was For Sale, Someone
On The Board Posted Pic's Of It, Bed Mods Are Lil Different

TEXAS 68 · 02-19-2005, 10:53 AM

Hey Dwayne, that stuff looks familar,ttt for you

saxmo · 02-19-2005, 11:46 PM

Thanks Everyone for the rapid response. I have received funds and the parts will have a new home within a few days. Thanks for the ttt 68.... when you gonna get that vortec hooked up?

02-16-2005, 07:24 PM	#1
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	FS: 70 SWB Frame w/disc I have a nice 1970 SWB frame from a step truck $150. Was blasted with a zero tip pressure at 3500# has some primer. Front disc with 5 lug. Rear still stock 6 lug. There is a 72 A/C cab that the frame buyer can have for free. Gotta get it quick before wife sends it to scrap metal guys. __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)

02-16-2005, 08:49 PM	#2
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Not a bad deal __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

02-16-2005, 09:24 PM	#4
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	45 minutes north of Houston, on HWY 59 __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)

02-16-2005, 09:27 PM	#5
silvertonguedevil Senior Member Join Date: May 2004 Location: Seaside, Oregon Posts: 1,789	Dern-it!! Why is this stuff always so far away? __________________ -Greg My Chevy trucks, past and present: 1962 C10 SB Fleetside 1964 C10 LB Fleetside BBW 1966 C10 SB Fleetside 1966 C10 SB Fleetside BBW 1968 C10 SB Fleetside 1971 C10 LB Fleetside 1971 C10 SB Fleetside 1972 C10 SB Fleetside Cheyenne 1972 C10 SB Fleetside Cheyenne Super 1972 C10 LB Fleetside Cheyenne Super 1974 C20 Cheyenne 1979 K5 Blazer Cheyenne 1982 K10 SB Fleetside Custom Deluxe 1982 K10 SB Fleetside Scottsdale 1986 C10 SB Fleetside Silverado 2008 Silverado 1500 4x4

02-16-2005, 10:38 PM	#7
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	here are some pix of the frame. I also am open to parts trading. I'll list parts I need in case someone wants to trade stuff out. 68 Chevy Fleetside Tailgate 68 Passenger front fender 69 Windshield Tailgate trunions Passenger outer rocker TH400 tranny mount bracket driveshaft for 1969 SWB C10 with 350/TH400 disk/drum proportioning valve Radiator TH400 kickdown shaft Front chrome bumper 68 grille inserts All of these parts are for same truck. I have a 69 cab with 68 front and steel fleet bed. I'll post pix of the cab asap Attached Images __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)

02-16-2005, 09:20 PM	#3
72402 Registered User Join Date: Nov 2004 Location: Cameron, Oklahoma Posts: 199	Where is Cleveland, Texas?

02-16-2005, 11:02 PM	#8
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	here are some more pix. Attached Images __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)

02-16-2005, 11:04 PM	#9
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	even more pictures! Attached Images __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)

02-16-2005, 11:05 PM	#10
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	last ones... Attached Images __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)

02-18-2005, 02:50 AM	#11
GlennBrittain Senior Member Join Date: Jun 2003 Location: Panola County Texas Posts: 401	What condition is the 69 cab and bed in. I am about 2 hours N' up 59. I will be out for a few days , will try to contact you next week.

02-19-2005, 12:59 AM	#12
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	for clarification: The frame is a 1970 SWB step bed truck frame. There are 2 cabs (free with frame purchase!) the white cab is the 1970 cab that was with the frame. The blue cab is a 1972 a/c cab that I had purchased seperately. I, personally, have $900 invested in this stuff, but must get rid of it asap. There is no bed for sale. It was in a picture, cause the cab was still with it. Thanks __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)

02-19-2005, 04:25 AM	#13
dapolice1 We can roll all Day!! Join Date: Jul 2003 Location: Austin, Tx. Posts: 165	let me see if i can work travel out... how long you give me if i send funds now?

02-19-2005, 08:34 AM	#14
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	I Remember That Truck From When It Was For Sale, Someone On The Board Posted Pic's Of It, Bed Mods Are Lil Different __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

02-19-2005, 10:53 AM	#15
TEXAS 68 Vortec in the works Join Date: Nov 2003 Location: Spring,Texas Posts: 735	Hey Dwayne, that stuff looks familar,ttt for you __________________ 68? It's all figured out untill you get it apart. Is it Sunday yet??? 68 Project 68 SWB frame off/98 Vortec with stock FI/power everything. 95 ECLB 2500 with 346,000 on the clock(the original HD) 99 Lesabre-wifes ride 08 Crew Cab LTZ-All Mine 89 SWB 5/7 drop-Son's first ride.

02-19-2005, 11:46 PM	#16
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	Thanks Everyone for the rapid response. I have received funds and the parts will have a new home within a few days. Thanks for the ttt 68.... when you gonna get that vortec hooked up? __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.