A picture needed of underside of the bed with Rear Hanger and Shackle Kits

[jpaitala]

I have seen the pic somewhere but cannot find it anymore.
I would need to see where to cut the bed "crossmembers" to make it fit onto the frame after Rear Hanger and Shackle Kit installation.

Anyone?

Thanks.

[beaterC10]

Look at the post by TIMSPEED. It has the pic you need.

[bigblock73]

here

http://67-72chevytrucks.com/vboard/s....php3?t=141409

I have two pics on there for ya.

[jpaitala]

Thanks guys!!!

[83C]

How much of a rear drop are you doing?

[jpaitala]

It's gonna be ~5".... It's the (Rear Hanger and Shackle Kit) + 2removed leafs....
Should be around 5" in total at the rear.

[83C]

I installed a DJM 4 inch shackle/hanger drop. I have not put the bed on it yet. I checked and the shackles are over the frame. Do you think I will need to cut my bed?

[jpaitala]

As far as I understand.. Yes, you need to cut it up.
Someone who really knows could answer to that right now. Or if you wanna wait like a week I will tell you for sure, after I have put the bed back onto the frame.

[83C]

Let me know what you find out. I will not be putting my bed on for a while

[bigblock73]

Originally Posted by 83C

I installed a DJM 4 inch shackle/hanger drop. I have not put the bed on it yet. I checked and the shackles are over the frame. Do you think I will need to cut my bed?

I think you will have to as well, but your instructions should be able to clarify this. You could just measure where they are at in relation to where the cross sill is...that should give you a good clue.