Parts & cab F/S From 67 Stepside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67mbsc · 02-19-2005, 12:16 PM

I have the following parts to sell that are my extra parts. All located near Myrtle Beach, S.C., and I can take them to the meet on March 17. I will post pictures as I can get them taken. All prices are PLUS shipping if available.

Stepside Fenders with NO cut-out, and with the steps. Very nice, no rot. $475.00 for all four pieces.

67 small window cab, needs some floor repair, and kick panel. Rockers are actually pretty good. Should have one corner put in. With title and/or bill of sale $200.00 No shipping on this cab. No glass, no doors.

LWB Stepside Bed Panels, one needs some rust repair, not all that bad. $250.00? for the pair.

67 GMC frame, shortened. With title and/or bill of sale. $100.00

All front suspension parts from this frame, $75.00.

Stepside Tail Gate, needs some work, $50.00.

Seat, needs recovered, with tracks, $25.00.

Step Side Rear bumper, has some extra holes from a plate bolted for a trailer hitch. $30.00

I can't think of a better reason to get the little lady to agree to go get more parts than to take her to Myrtle Beach!!!!

69ShortStep · 02-19-2005, 02:01 PM

I am interested in the tailgate and rear bumper, Is the tailgate original ( GMC or CHEV)? Is the rear bumper chromed or painted? do you have any pictures?

68 chevy truck-TPI · 02-19-2005, 03:33 PM

interested in the drivers side stepbed fender without the step. can you post pic's or email them to: dharrison01@alltel.net

67mbsc · 02-20-2005, 01:41 AM

69Shortstep; the tailgate is original GMC, the rear bumper is painted steel original. I hope to get some pictures soon, I've been really sick which is why I'm selling a lot of parts. Thanks. And, as for the rear Step Fenders, same way, I hope to get some pics Sunday for yall.

67mbsc · 02-20-2005, 10:08 AM

Hey!!!!!!! I can't figure out how to attach the pics!!!! Can someone help me??? In the meantime, if you want pics, please let me know.
EastCoastMPG@yahoo.com

LUV2XCLR8 · 02-20-2005, 10:28 AM

I CAN POST FOR YA luv2xclr8@charter.net, OR LOOK ON THE "FAQ'S" SECTION FOR HELP ON POSTING PIC'S

67mbsc · 02-20-2005, 10:37 AM

I've e-mailed yall the pics, thanks. I looked in FAQ, but my puter's not on all the time, I couldn't figger it out!!!! Thanks

LUV2XCLR8 · 02-20-2005, 10:44 AM

Quote:

Originally Posted by 67mbsc

I've e-mailed yall the pics, thanks. I looked in FAQ, but my puter's not on all the time, I couldn't figger it out!!!! Thanks

DID YOU ONLY SEND THIS ONE PIC, IT WAS THE ONLY ONE I RECEIVED

(MIGHT NEED TO TAKE SOME CLOSE-UPS OF THE INDIVIDUAL PARTS)

Super Duck · 02-21-2005, 12:06 PM

how much for the grill. gen111shorty is looking for one

Joe67 · 02-21-2005, 01:06 PM

Are the rear stepside bed outer panels the same for a SWB? If so, how much to ship to 48035?

67mbsc · 02-21-2005, 09:07 PM

At this time, I'm holding the rear Step Fenders for a member till next week. If you're interested, please let me know.
THanks

67mbsc · 02-21-2005, 09:09 PM

67c10, it is my understanding and thinking that my long wheel base bedsies will not work for a SWB.

kaycee · 02-21-2005, 11:05 PM

Do you have the rear tail light/backup light harness ?

67mbsc · 02-21-2005, 11:28 PM

kaycee, I just saw that harness today, from the body connector to the end of it,(probably about 6-8 feet, I'd guess?) lets say $15.00 plus the shipping? Let me know.
Thanks

Joe67 · 02-22-2005, 08:54 AM

Quote:

Originally Posted by 67mbsc

67c10, it is my understanding and thinking that my long wheel base bedsies will not work for a SWB.

No problem, thanks

kaycee · 02-22-2005, 11:44 PM

Sounds good do u have any pics? PM me

67mbsc · 02-26-2005, 06:43 PM

Repost, the member that said he wanted them sold his truck instead, so my Stepside fenders and steps are for sale again! VERY nice fenders, rust free, NO tire cut-out. All four pieces, fenders and steps. They ARE shippable via Greyhound, and very inexpensively!

68 chevy truck-TPI · 02-26-2005, 06:50 PM

i am still interested in the drivers side stepbed fender.

67mbsc · 02-27-2005, 09:21 AM

I just re-listed them as the pair, please give me some time to see if anybody wants the pair before I break them up, they are a really nice set of fenders. I'm taking them to a meet here in Myrtle Beach March 17 if not sold, so maybe after that, if they don't sell, I'll consider breaking them up. I will keep you in mind though. Thank You.

qksilver · 02-27-2005, 10:55 AM

i am interested in the frame, but no offense, only if it was done clean. I am here by Fort Bragg, might be able to pick it up the week end of the 13th. If I can get my wife to agree, we will be down for her birthday. Don't know if she will agree to dragging a trailer with us.
Thanks,
Steve

67mbsc · 02-27-2005, 11:15 AM

Hey Steve,
Yes, the frame was done right. There needs to be the fishplate finished, that's all. The frame is really, really clean, too. That weekend, I think, is when we have a really big meet here, I'm going to be there a lot, and trying to sell some parts, too. So, if you are interested, please PM me so we can work out the details.

67mbsc · 03-02-2005, 07:27 AM

Still have parts to sell

john@thepier · 03-02-2005, 02:17 PM

Is the GMC gill and top bar available.

67mbsc · 03-02-2005, 02:20 PM

Yep, the Grille is available. you can write me direct at

EastCoastMPG@yahoo.com

Thanks

john@thepier · 03-02-2005, 02:28 PM

I have sent you a message to your e-mail

02-19-2005, 12:16 PM	#1
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Parts & cab F/S From 67 Stepside I have the following parts to sell that are my extra parts. All located near Myrtle Beach, S.C., and I can take them to the meet on March 17. I will post pictures as I can get them taken. All prices are PLUS shipping if available. Stepside Fenders with NO cut-out, and with the steps. Very nice, no rot. $475.00 for all four pieces. 67 small window cab, needs some floor repair, and kick panel. Rockers are actually pretty good. Should have one corner put in. With title and/or bill of sale $200.00 No shipping on this cab. No glass, no doors. LWB Stepside Bed Panels, one needs some rust repair, not all that bad. $250.00? for the pair. 67 GMC frame, shortened. With title and/or bill of sale. $100.00 All front suspension parts from this frame, $75.00. Stepside Tail Gate, needs some work, $50.00. Seat, needs recovered, with tracks, $25.00. Step Side Rear bumper, has some extra holes from a plate bolted for a trailer hitch. $30.00 I can't think of a better reason to get the little lady to agree to go get more parts than to take her to Myrtle Beach!!!!

02-20-2005, 01:41 AM	#4
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Pics & Parts 69Shortstep; the tailgate is original GMC, the rear bumper is painted steel original. I hope to get some pictures soon, I've been really sick which is why I'm selling a lot of parts. Thanks. And, as for the rear Step Fenders, same way, I hope to get some pics Sunday for yall.

02-20-2005, 10:08 AM	#5
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Pics!!! Hey!!!!!!! I can't figure out how to attach the pics!!!! Can someone help me??? In the meantime, if you want pics, please let me know. EastCoastMPG@yahoo.com

02-20-2005, 10:28 AM	#6
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	I CAN POST FOR YA luv2xclr8@charter.net, OR LOOK ON THE "FAQ'S" SECTION FOR HELP ON POSTING PIC'S __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

02-20-2005, 10:37 AM	#7
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Pics I've e-mailed yall the pics, thanks. I looked in FAQ, but my puter's not on all the time, I couldn't figger it out!!!! Thanks

02-19-2005, 02:01 PM	#2
69ShortStep Registered User Join Date: Jan 2004 Location: Canal Winchester, OH Posts: 143	I am interested in the tailgate and rear bumper, Is the tailgate original ( GMC or CHEV)? Is the rear bumper chromed or painted? do you have any pictures?

02-19-2005, 03:33 PM	#3
68 chevy truck-TPI A WORK IN PROGRESS Join Date: Apr 2004 Location: toccoa, georgia Posts: 205	interested in the drivers side stepbed fender without the step. can you post pic's or email them to: dharrison01@alltel.net

02-21-2005, 12:06 PM	#9
Super Duck Chevy Nuttttt Join Date: Sep 2004 Location: Santa Maria Ca. Posts: 568	how much for the grill. gen111shorty is looking for one __________________ 67' Chev swb step side 69' SS elky 03' Chev ext cab 4X4 hey who lernt me to spell is there anything else?

02-21-2005, 01:06 PM	#10
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	Are the rear stepside bed outer panels the same for a SWB? If so, how much to ship to 48035? __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

02-21-2005, 09:07 PM	#11
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Fenders At this time, I'm holding the rear Step Fenders for a member till next week. If you're interested, please let me know. THanks

02-21-2005, 09:09 PM	#12
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	stepside panels 67c10, it is my understanding and thinking that my long wheel base bedsies will not work for a SWB.

02-21-2005, 11:05 PM	#13
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,453	Do you have the rear tail light/backup light harness ? __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327/4L60

02-21-2005, 11:28 PM	#14
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	kaycee, I just saw that harness today, from the body connector to the end of it,(probably about 6-8 feet, I'd guess?) lets say $15.00 plus the shipping? Let me know. Thanks

02-22-2005, 11:44 PM	#16
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,453	Sounds good do u have any pics? PM me __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327/4L60

02-26-2005, 06:43 PM	#17
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Step Fenders Are For Sale! Repost, the member that said he wanted them sold his truck instead, so my Stepside fenders and steps are for sale again! VERY nice fenders, rust free, NO tire cut-out. All four pieces, fenders and steps. They ARE shippable via Greyhound, and very inexpensively!



Register or Log In To remove these advertisements.

02-26-2005, 06:50 PM	#18
68 chevy truck-TPI A WORK IN PROGRESS Join Date: Apr 2004 Location: toccoa, georgia Posts: 205	stepbed fender i am still interested in the drivers side stepbed fender. Last edited by 68 chevy truck-TPI; 03-09-2005 at 01:30 PM.

02-27-2005, 09:21 AM	#19
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Step Fenders I just re-listed them as the pair, please give me some time to see if anybody wants the pair before I break them up, they are a really nice set of fenders. I'm taking them to a meet here in Myrtle Beach March 17 if not sold, so maybe after that, if they don't sell, I'll consider breaking them up. I will keep you in mind though. Thank You.

02-27-2005, 10:55 AM	#20
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	i am interested in the frame, but no offense, only if it was done clean. I am here by Fort Bragg, might be able to pick it up the week end of the 13th. If I can get my wife to agree, we will be down for her birthday. Don't know if she will agree to dragging a trailer with us. Thanks, Steve

02-27-2005, 11:15 AM	#21
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Frame Hey Steve, Yes, the frame was done right. There needs to be the fishplate finished, that's all. The frame is really, really clean, too. That weekend, I think, is when we have a really big meet here, I'm going to be there a lot, and trying to sell some parts, too. So, if you are interested, please PM me so we can work out the details.

03-02-2005, 07:27 AM	#22
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	NEBODY else need pics??? Still have parts to sell

03-02-2005, 02:17 PM	#23
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Is the GMC gill and top bar available.

03-02-2005, 02:20 PM	#24
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	GMC Grille Yep, the Grille is available. you can write me direct at EastCoastMPG@yahoo.com Thanks

03-02-2005, 02:28 PM	#25
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	I have sent you a message to your e-mail

Register or Log In To remove these advertisements.