need 1971 license plate - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*big71* · 05-31-2002, 07:21 PM

just seeing how many got them and what the going price on them any state

Mike C · 05-31-2002, 10:07 PM

www.ebay.com and do smart search. license plate and your state search in header and body. I paid $25 for my '68 Hemisfair plates NOS.

superchevy · 05-31-2002, 10:28 PM

Ihave ''66, '67, 68, '69, '70, '71, and '72 Texas Dealer's plates.
They only issue 1 dealer plate per vehicle in Texas, so you can leave your front bumper with no plate for a nice, clean look.SC

*big71* · 05-31-2002, 10:35 PM

how much for the dealer plate 71

superchevy · 05-31-2002, 10:38 PM

Sorry, big,
not for sale.
SC

Hutch · 05-31-2002, 11:09 PM

I was looking for a Year of manufacture Texas 69 Dealer plate to eliminate the front plate on my e-type.
I was told that I could do this and checked with the license dept, and they said I couldn't do this because I was not a dealer.
Superchevy have you done this and are you a dealer?

Longhorn Man · 05-31-2002, 11:41 PM

Your state may be a pain in the @ss on this. I know I went to a wrecking yard localy, and found a set of perfect (note, not near perfect...PERFECT) 1970 Ohio plates. When I went to the counter, they would not give them to me.
He said it was illegal to sell them, so I said I would relieve him of them for no cost, but pay full price for the parts I was getting. (I always chew them to the bottom price, and they know I will) He said no, took the plates, and cut them in 1/2 on the spot.
Some states will not let you get vintage tags.

even just for show reasons.

superchevy · 05-31-2002, 11:42 PM

Hutch,
Yes, and yes.
You do not have to be a dealer in the state of Texas in order to use a dealer plate for year of manufacture of 25 years or older vehicles. The State is now allowing what was available in the license plate department during the year of manufacture to be used.
You have to declare antique or "classic" status.
If you are looking for a '69 dealer plate, and how to register it, contact:

Larry Machacek
281-429-2505

He's got what you're looking for.
SC

*big71* · 05-31-2002, 11:43 PM

i thank we can run them on the rear but you have to have the one that dmv give you in the car with you at all times at least that what i been told alot of pepol run them here

70c10 · 06-01-2002, 12:33 AM

I paid $20 for my 70' plates. I had to take them with me when I registered my truck. My regular plates are under the seat at all times. I have 2 registrations of course.

OhioDan · 06-01-2002, 07:00 AM

In Ohio, you can run same year plates. All you have to do is find a set(at least one plate) found mine at a swap meet ($10.00), for your year. They must be in good repair. Take them to License registration, and they'll register them to your truck. They'll also give you one antique/historical plate that must be kept with the vehicle at all times. You can run your same year plates front and back, but you have to keep the historical plate in/on the vehicle. Just my $.02

Longhorn Man · 06-01-2002, 04:58 PM

Dan, is that good for limited use, or daily driver?
I tried to do it as a daily driver and they laughed at me.

Erl · 06-01-2002, 05:24 PM

Here is the name and Email of the guy I deal with, he has everything for texas. He is a member of some license plate dealer associaton. He can help you.
Roy Carroll
Garland, TX
972 495 2858
groycar@cs.com

hughnews1 · 06-01-2002, 08:56 PM

on my c-10 '69 Now ........ wooo hoooooooooooooooo only $25.00 plus $3 to the state

*Fast68Chevy* · 06-01-2002, 10:15 PM

IL wont allow useage of vintage plates, we have to use current plates here, i have a pair of mint shape orange IL 69 plates, and some others like 1776/1976 ones and all kinds of 40's 50's ones,.

longhornmail, thats why you stick them under yuor shirt and walk out.

OhioDan · 06-02-2002, 03:03 AM

Here's the web site for the Ohio BMV.
http://www.moving.com/community/dmv/ohio.asp
Check for yourself and see if you don't come up with the same thought/ feeling that I did. ( can use same year plates on daily driver?)

*Randy70C-10* · 06-02-2002, 09:18 AM

Wow, some of you guys have to live with harsh rules. Most of the vintage vehicles in VA have same-year plates. They can be on daily drivers to as long as you have a current state inspection.

*Randy70C-10* · 06-02-2002, 09:32 AM

Tony, are you just collecting them? I don't have a pair, but I do have "one" nice one that I'll send you for $5. (to cover mailing) It's very clean and no bends or dings. Email for address if interested. Also, it's a VA plate.

05-31-2002, 07:21 PM	#1
big71 Account Suspended Join Date: Nov 2001 Location: JONESVILL NC Posts: 1,303	need 1971 license plate just seeing how many got them and what the going price on them any state Attached Images

05-31-2002, 10:07 PM	#2
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,727	www.ebay.com and do smart search. license plate and your state search in header and body. I paid $25 for my '68 Hemisfair plates NOS. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

05-31-2002, 10:28 PM	#3
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Ihave ''66, '67, 68, '69, '70, '71, and '72 Texas Dealer's plates. They only issue 1 dealer plate per vehicle in Texas, so you can leave your front bumper with no plate for a nice, clean look.SC __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

05-31-2002, 10:35 PM	#4
big71 Account Suspended Join Date: Nov 2001 Location: JONESVILL NC Posts: 1,303	how much for the dealer plate 71 Attached Images

05-31-2002, 10:38 PM	#5
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Sorry, big, not for sale. SC __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

05-31-2002, 11:09 PM	#6
Hutch Registered User Join Date: Oct 2001 Location: Grapevine, Tx. Posts: 2,142	I was looking for a Year of manufacture Texas 69 Dealer plate to eliminate the front plate on my e-type. I was told that I could do this and checked with the license dept, and they said I couldn't do this because I was not a dealer. Superchevy have you done this and are you a dealer? __________________ John Hutchison Grapevine,Texas 68 1/2 t swb 68 Mustang 69 Jaguar 71 1/2 t swb 88 Supra CompTs6m 93 Escort GT 2005 Corolla XRS

05-31-2002, 11:41 PM	#7
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Your state may be a pain in the @ss on this. I know I went to a wrecking yard localy, and found a set of perfect (note, not near perfect...PERFECT) 1970 Ohio plates. When I went to the counter, they would not give them to me. He said it was illegal to sell them, so I said I would relieve him of them for no cost, but pay full price for the parts I was getting. (I always chew them to the bottom price, and they know I will) He said no, took the plates, and cut them in 1/2 on the spot. Some states will not let you get vintage tags. even just for show reasons.

05-31-2002, 11:42 PM	#8
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Hutch, Yes, and yes. You do not have to be a dealer in the state of Texas in order to use a dealer plate for year of manufacture of 25 years or older vehicles. The State is now allowing what was available in the license plate department during the year of manufacture to be used. You have to declare antique or "classic" status. If you are looking for a '69 dealer plate, and how to register it, contact: Larry Machacek 281-429-2505 He's got what you're looking for. SC __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

05-31-2002, 11:43 PM	#9
big71 Account Suspended Join Date: Nov 2001 Location: JONESVILL NC Posts: 1,303	i thank we can run them on the rear but you have to have the one that dmv give you in the car with you at all times at least that what i been told alot of pepol run them here Attached Images

06-01-2002, 12:33 AM	#10
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	I paid $20 for my 70' plates. I had to take them with me when I registered my truck. My regular plates are under the seat at all times. I have 2 registrations of course. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

06-01-2002, 07:00 AM	#11
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	In Ohio, you can run same year plates. All you have to do is find a set(at least one plate) found mine at a swap meet ($10.00), for your year. They must be in good repair. Take them to License registration, and they'll register them to your truck. They'll also give you one antique/historical plate that must be kept with the vehicle at all times. You can run your same year plates front and back, but you have to keep the historical plate in/on the vehicle. Just my $.02 __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started. Last edited by OhioDan; 06-01-2002 at 07:04 AM.

06-01-2002, 04:58 PM	#12
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Dan, is that good for limited use, or daily driver? I tried to do it as a daily driver and they laughed at me.

06-01-2002, 05:24 PM	#13
Erl Registered User Join Date: Mar 2002 Location: Dallas, TX Posts: 555	Here is the name and Email of the guy I deal with, he has everything for texas. He is a member of some license plate dealer associaton. He can help you. Roy Carroll Garland, TX 972 495 2858 groycar@cs.com __________________ 1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX

06-01-2002, 08:56 PM	#14
hughnews1 Registered User Join Date: Apr 2002 Location: Hudson FL gulf coast Posts: 624	nys plates .. on my c-10 '69 Now ........ wooo hoooooooooooooooo only $25.00 plus $3 to the state

06-01-2002, 10:15 PM	#15
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	IL wont allow useage of vintage plates, we have to use current plates here, i have a pair of mint shape orange IL 69 plates, and some others like 1776/1976 ones and all kinds of 40's 50's ones,. longhornmail, thats why you stick them under yuor shirt and walk out.



Register or Log In To remove these advertisements.

06-02-2002, 03:03 AM	#16
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	Here's the web site for the Ohio BMV. http://www.moving.com/community/dmv/ohio.asp Check for yourself and see if you don't come up with the same thought/ feeling that I did. ( can use same year plates on daily driver?) __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started.

06-02-2002, 09:18 AM	#17
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Wow, some of you guys have to live with harsh rules. Most of the vintage vehicles in VA have same-year plates. They can be on daily drivers to as long as you have a current state inspection.

06-02-2002, 09:32 AM	#18
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Tony, are you just collecting them? I don't have a pair, but I do have "one" nice one that I'll send you for $5. (to cover mailing) It's very clean and no bends or dings. Email for address if interested. Also, it's a VA plate. Last edited by Randy70C-10; 06-02-2002 at 12:16 PM.

Register or Log In To remove these advertisements.