help me find a carb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gkauno · 02-28-2005, 02:14 AM

I am looking for a 4-barrel carb for my 72 c-10 truck with a 307. anyone out there have one they do not need. almost any condition will do as i will more than likely will rebuild it. Holley or Q-jet is what i am looking for.

thanks

stelth2002 · 02-28-2005, 02:37 AM

I have a quad, Ill send ya a PM

**COBALT** · 02-28-2005, 12:24 PM

I rebuilt a Carter 9000 series that is extremly close to the Edelbrock 1406. I was going to use it, but then I got a brand new 1406 as a gift, and well...on the shelf it sits rebuit and ready to run.

70c10 · 02-28-2005, 01:29 PM

Cobalt, what are you looking to get out of that carb if gkauno passes?

gkauno · 02-28-2005, 05:49 PM

thanks for the offers but i am in need of a 4 barrell kind of on the cheap side as i do not have a lot to spend and was hoping someone had an old extra one that is just taking up space. I can spend some just not a lot for a rebuilt one.

Paul72 · 02-28-2005, 07:27 PM

There was a Holley for sale not too long ago. I think it was $25. Can't seem to find the post right now...

wannabeburbowner · 02-28-2005, 07:53 PM

I have a 600 holley that I will sell you for $40. It worked when pulled about a month ago.

*Randy70C-10* · 02-28-2005, 08:15 PM

Would you be interested in an intake? I have a GM stock aluminum intake for a quadrajet, $45 shipped to your door. It's very nice, no stripped holes or any other kind of damage.

gkauno · 02-28-2005, 08:20 PM

that is exactly what i have already, i appreciate the offer though. I just need a carb to go with it.

Thanks again.

*Randy70C-10* · 02-28-2005, 08:42 PM

No problem

gkauno · 03-02-2005, 12:24 PM

^^^^

stelth2002 · 03-08-2005, 06:38 PM

gkauno, I have the carb and you said you wanted it. I sent you a couple PMs but havent heard from you.

tphsmith · 03-08-2005, 08:30 PM

I just took a edelbrock 1405 600 cfm tonight because I put an 1406 electric choke on to replace it, works very well

*rage'nrat638* · 03-08-2005, 08:42 PM

yea this was the 25 bucker...what a sweet thing...

gkauno · 03-08-2005, 09:18 PM

My computer has been toast and i just now got it back so i still want it if you still have it.

67cst · 03-08-2005, 09:52 PM

rage you got that holley for 25 bucks?

*rage'nrat638* · 03-08-2005, 10:24 PM

Quote:

Originally Posted by 67cst

rage you got that holley for 25 bucks?

yup....spreadbore

gkauno · 03-08-2005, 11:09 PM

well my computer crashed and then i lost out it looks like on that carb. damn, that is exactly what i was looking for in a carb. Too bad people do not post their own threads when they want something.

*Randy70C-10* · 03-08-2005, 11:11 PM

That's badass dude!

Hey y'all, I sold the intake a couple days ago. If I run across more of them I'll keep you all informed

*rage'nrat638* · 03-08-2005, 11:20 PM

Quote:

Originally Posted by Paul72

There was a Holley for sale not too long ago. I think it was $25. Can't seem to find the post right now...

well if your talking about me.....i bought this a week before you ever made your post.....

i was just showing paul 72 that i bought that one......

seems to me....
wannabeburbowner has a holley for 40.00 for you....
and
stelth2002 has a quadrajet for you.....

from reading the post......
your pal mark

70c10 · 03-08-2005, 11:26 PM

tphsmith- how much for the edelbrock if gkauno passes?

02-28-2005, 02:14 AM	#1
gkauno Registered User Join Date: Mar 2004 Location: Seattle, WA Posts: 19	help me find a carb I am looking for a 4-barrel carb for my 72 c-10 truck with a 307. anyone out there have one they do not need. almost any condition will do as i will more than likely will rebuild it. Holley or Q-jet is what i am looking for. thanks

02-28-2005, 02:37 AM	#2
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	I have a quad, Ill send ya a PM __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

02-28-2005, 12:24 PM	#3
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	I rebuilt a Carter 9000 series that is extremly close to the Edelbrock 1406. I was going to use it, but then I got a brand new 1406 as a gift, and well...on the shelf it sits rebuit and ready to run. __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

02-28-2005, 01:29 PM	#4
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Cobalt, what are you looking to get out of that carb if gkauno passes? __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

02-28-2005, 05:49 PM	#5
gkauno Registered User Join Date: Mar 2004 Location: Seattle, WA Posts: 19	Carb thanks for the offers but i am in need of a 4 barrell kind of on the cheap side as i do not have a lot to spend and was hoping someone had an old extra one that is just taking up space. I can spend some just not a lot for a rebuilt one.

02-28-2005, 07:27 PM	#6
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	There was a Holley for sale not too long ago. I think it was $25. Can't seem to find the post right now... __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958

02-28-2005, 07:53 PM	#7
wannabeburbowner Registered User Join Date: Dec 2004 Location: New Philadelphia, Ohio Posts: 253	I have a 600 holley that I will sell you for $40. It worked when pulled about a month ago.

02-28-2005, 08:15 PM	#8
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Would you be interested in an intake? I have a GM stock aluminum intake for a quadrajet, $45 shipped to your door. It's very nice, no stripped holes or any other kind of damage.

02-28-2005, 08:20 PM	#9
gkauno Registered User Join Date: Mar 2004 Location: Seattle, WA Posts: 19	intake offer that is exactly what i have already, i appreciate the offer though. I just need a carb to go with it. Thanks again.

02-28-2005, 08:42 PM	#10
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	No problem

03-02-2005, 12:24 PM	#11
gkauno Registered User Join Date: Mar 2004 Location: Seattle, WA Posts: 19	^^^^

03-08-2005, 06:38 PM	#12
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	gkauno, I have the carb and you said you wanted it. I sent you a couple PMs but havent heard from you. __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

03-08-2005, 08:30 PM	#13
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	I just took a edelbrock 1405 600 cfm tonight because I put an 1406 electric choke on to replace it, works very well __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

03-08-2005, 08:42 PM	#14
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	yea this was the 25 bucker...what a sweet thing... Last edited by rage'nrat638; 07-12-2007 at 07:05 AM.

03-08-2005, 09:18 PM	#15
gkauno Registered User Join Date: Mar 2004 Location: Seattle, WA Posts: 19	My computer has been toast and i just now got it back so i still want it if you still have it.



Register or Log In To remove these advertisements.

03-08-2005, 09:52 PM	#16
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,302	rage you got that holley for 25 bucks? __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724

03-08-2005, 11:09 PM	#18
gkauno Registered User Join Date: Mar 2004 Location: Seattle, WA Posts: 19	well my computer crashed and then i lost out it looks like on that carb. damn, that is exactly what i was looking for in a carb. Too bad people do not post their own threads when they want something.

03-08-2005, 11:11 PM	#19
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	That's badass dude! Hey y'all, I sold the intake a couple days ago. If I run across more of them I'll keep you all informed

03-08-2005, 11:26 PM	#21
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	tphsmith- how much for the edelbrock if gkauno passes? __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

Register or Log In To remove these advertisements.