I actually did something today! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

krue · 03-01-2005, 08:03 PM

For once.

After dropping the GMC's quadrajet off to be rebuilt I decided to tinker on the Blazer. I actually managed to get it to crank with a plastic gas can and some temp. wiring.

I replaced all of the rubber fuel lines, dropped the tank and emptied the varnished gas out of it. Tomorrow gonna reinstall the tank and do a little more wiring to see if it will move under it's own power!

**Palf70Step** · 03-01-2005, 10:26 PM

Good news Krue. Don't rev it too bad you might loose some more body if it vibrates too much at this point

Glad to hear it thought. Pretty soon no getting stuck at the new home front.

Did you find the HEI or still with stock distributor.??

krue · 03-01-2005, 11:14 PM

Still stock, guy at the parts store says he may have one laying around his shop he'll give me if he can find it.

BTW if the engine in this thing works out (sounds good so far) when you gonna come get this engine to get your 82 going?

**Palf70Step** · 03-01-2005, 11:16 PM

Just let me know and I'll find my way there. I may need help after the left turn past where the old tree fell next to the barn that burnt down.

03-01-2005, 08:03 PM	#1
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	I actually did something today! For once. After dropping the GMC's quadrajet off to be rebuilt I decided to tinker on the Blazer. I actually managed to get it to crank with a plastic gas can and some temp. wiring. I replaced all of the rubber fuel lines, dropped the tank and emptied the varnished gas out of it. Tomorrow gonna reinstall the tank and do a little more wiring to see if it will move under it's own power! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

03-01-2005, 10:26 PM	#2
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,249	Good news Krue. Don't rev it too bad you might loose some more body if it vibrates too much at this point Glad to hear it thought. Pretty soon no getting stuck at the new home front. Did you find the HEI or still with stock distributor.?? __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

03-01-2005, 11:14 PM	#3
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Still stock, guy at the parts store says he may have one laying around his shop he'll give me if he can find it. BTW if the engine in this thing works out (sounds good so far) when you gonna come get this engine to get your 82 going? __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

03-01-2005, 11:16 PM	#4
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,249	Just let me know and I'll find my way there. I may need help after the left turn past where the old tree fell next to the barn that burnt down. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.