DANA 44 & 14 BOLT FF AXELS FS CHEAP (BOTH WITH DISCS) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

junkyardjohn · 03-02-2005, 07:40 PM

I HAVE A PAIR OF AXELS FOR SALE. I PICKED THESE UP IN A SWAP. NOT SURE OF THE GEAR RATIO. DANA 44 FRONT AXEL WITH 8 BOLT HUBS (DISCS) & A 14 BOLT FF THAT HAS BEEN CONVERTED TO DISCS.
$400 FOR THE PAIR PICKED UP IN CARSON CITY NEVADA. I WILL NOT SHIP SO DON'T EVEN ASK. THESE ARE BARGAIN PRICED FOR SOMEONE WHOS CLOSE ENOUGH TO PICK UP.

JOHN

THE DANA 44 FRONT AXEL IS ALSO A 410 RATIO JOHN

ljbear · 03-02-2005, 08:01 PM

John could you get a spring perch center to center measurement off the 14 bolt? Would you be willing to pull the 14 bolt cover and check the ratio?

junkyardjohn · 03-02-2005, 08:12 PM

HI LARRY.... I'LL DO IT BUT IT WILL PROBABLY BE TOMORROW BEFORE I CAN GET TO IT. I GOT THESE AXELS FROM JEREMY UP IN WINAMUCCA.

JOHN

ljbear · 03-02-2005, 08:15 PM

John,

Thanks, they looked familiar as did the blazer.

junkyardjohn · 03-03-2005, 09:27 PM

Quote:

Originally Posted by ljbear

John could you get a spring perch center to center measurement off the 14 bolt? Would you be willing to pull the 14 bolt cover and check the ratio?

HI LARRY ... THE PERCHES ARE 43" FROM CENTER TO CENTER & IT IS A 410 GEAR RATIO IN THE 14 BOLT AXEL. I HAVE A SET OF NEW WELD ON PERCHES THAT I'LL THROW IN. JOHN

junkyardjohn · 03-04-2005, 04:08 PM

Ttt

nu2-72 · 03-04-2005, 04:14 PM

John, that is an outstanding deal. I will have much more in changing my stuff over.
Would you be able to come up with just one dust shield from a 3/4 ton? And would you know if 2wd and 4wd shields are the same? Thought you might have something out to compare to.
Bump.

DruBlazer · 03-04-2005, 08:27 PM

I may be interested. Yeah that's a good deal. I'm in the Auburn, Ca area. Do they have any locking in the carriers or are they open? Do they have calipers? I see some in the one pic. Is the front 44 also 4.10?

junkyardjohn · 03-04-2005, 09:30 PM

Quote:

Originally Posted by nu2-72

John, that is an outstanding deal. I will have much more in changing my stuff over.
Would you be able to come up with just one dust shield from a 3/4 ton? And would you know if 2wd and 4wd shields are the same? Thought you might have something out to compare to.
Bump.

SORRY... NO ROTOR DUST SHEILDS. P.M. TEEITUP, I BET HE HAS SOME.

JOHN

junkyardjohn · 03-04-2005, 09:38 PM

Quote:

Originally Posted by DruBlazer

I may be interested. Yeah that's a good deal. I'm in the Auburn, Ca area. Do they have any locking in the carriers or are they open? Do they have calipers? I see some in the one pic. Is the front 44 also 4.10?

DRU.... THE 14 BOLT COMES WITH CALIPERS. I'M NOT SURE IF I HAVE ANY CALIPERS FOR THE 44 OR NOT. I'LL LOOK & THROW THEM IN IF I CAN FIND ANY. I BELIEVE BOTH DIFFs ARE OPEN. I'M NOT SURE OF THE GEAR RATIO IN THE 44. I'LL HAVE TO GET SOMEONE OVER HERE TO HELP ME MUSCLE THIS SOB AROUND SO I CAN PULL THE COVER WITHOUT MAKING A BIG FRICKIN MESS.

JOHN

junkyardjohn · 03-05-2005, 05:21 PM

Ttt

junkyardjohn · 03-05-2005, 09:21 PM

THE FRONT DANA 44 AXEL IS A 410 RATIO ALSO. SO BOTH AXELS ARE 410 GEAR RATIO.

JOHN

DruBlazer · 03-06-2005, 10:34 PM

PM'ed ya.

junkyardjohn · 03-07-2005, 01:31 AM

Quote:

Originally Posted by DruBlazer

PM'ed ya.

NEVER RECIEVED YOUR P.M.

PLEASE TRY IT AGAIN. OR EMAIL ME AT FK9U812@AOL.COM . JOHN

03-02-2005, 07:40 PM	#1
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	Dana 44 & 14 Bolt Ff Axels Fs Cheap (both With Discs) I HAVE A PAIR OF AXELS FOR SALE. I PICKED THESE UP IN A SWAP. NOT SURE OF THE GEAR RATIO. DANA 44 FRONT AXEL WITH 8 BOLT HUBS (DISCS) & A 14 BOLT FF THAT HAS BEEN CONVERTED TO DISCS. $400 FOR THE PAIR PICKED UP IN CARSON CITY NEVADA. I WILL NOT SHIP SO DON'T EVEN ASK. THESE ARE BARGAIN PRICED FOR SOMEONE WHOS CLOSE ENOUGH TO PICK UP. JOHN THE DANA 44 FRONT AXEL IS ALSO A 410 RATIO JOHN Attached Images __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST Last edited by junkyardjohn; 03-05-2005 at 09:13 PM.

03-02-2005, 08:01 PM	#2
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	John could you get a spring perch center to center measurement off the 14 bolt? Would you be willing to pull the 14 bolt cover and check the ratio? __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"

03-02-2005, 08:12 PM	#3
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	HI LARRY.... I'LL DO IT BUT IT WILL PROBABLY BE TOMORROW BEFORE I CAN GET TO IT. I GOT THESE AXELS FROM JEREMY UP IN WINAMUCCA. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

03-02-2005, 08:15 PM	#4
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	John, Thanks, they looked familiar as did the blazer. __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"

03-04-2005, 04:08 PM	#6
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	Ttt __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

03-04-2005, 04:14 PM	#7
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	John, that is an outstanding deal. I will have much more in changing my stuff over. Would you be able to come up with just one dust shield from a 3/4 ton? And would you know if 2wd and 4wd shields are the same? Thought you might have something out to compare to. Bump. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

03-04-2005, 08:27 PM	#8
DruBlazer Got Blazer? Join Date: Oct 2004 Location: Newcastle, California Posts: 76	I may be interested. Yeah that's a good deal. I'm in the Auburn, Ca area. Do they have any locking in the carriers or are they open? Do they have calipers? I see some in the one pic. Is the front 44 also 4.10?

03-05-2005, 05:21 PM	#11
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	Ttt __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

03-05-2005, 09:21 PM	#12
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	THE FRONT DANA 44 AXEL IS A 410 RATIO ALSO. SO BOTH AXELS ARE 410 GEAR RATIO. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

03-06-2005, 10:34 PM	#13
DruBlazer Got Blazer? Join Date: Oct 2004 Location: Newcastle, California Posts: 76	PM'ed ya.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.