1970 SWB looking for trade or sale (NW OR) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fulltop74 · 03-03-2005, 06:20 PM

http://portland.craigslist.org/car/62005000.html

OK I will try desribe my truck I know I will miss
something but here we go.

ENGINE, is 350 4 bolt main
new aluminum pistons 9.5 to 1
new I beam rods 5.7
new Edelbrock aluminum heads 2.02 intake
new Eldelbrock 750 carb
new polished intake
new chrome pullies
new HEI cap/rotor/ wires and pluggs
new bowtie expensive wire seperaters
tranny is th400 with a B&M holeshot converter
12 bolt rear end

BODY,
fresh paint inside & out (Patriot Red)
I have all lights for the truck and brand new
'Painless wire kit'

Needs: to be assembled
Needs: grille insert
Needs: tailgate
Needs: new carpet set ($100 buck or cheaper)

I know I am missing a whole bunch of stuff but where
are you located maybe you can drop buy and check it
out. Please let me know if I can any more questions.

James

$6.5K OBO, or trade for 85-88 SS Monte Carlo, must be clean

70chevc10 · 03-03-2005, 07:16 PM

post some pics, i know someone who might be interested in the tacoma washignton area. he just sold an 88 monte last week, but he has a couple others that hes working on and hes been wanting to get a 68-72 swb. post pics and ill have him check it out

EDIT: sorry i didnt see the link at the top of the page ill let him know. also, is the truck as it is in those picutres, or does the engine bed and all need to be put in/on the truck?

fulltop74 · 03-03-2005, 07:29 PM

As it sits today.....

*Randy70C-10* · 03-03-2005, 08:45 PM

Sweet!!

Are you should that the pistons are aluminum? (sorry, I'm being a smartass)

silvertonguedevil · 03-03-2005, 08:55 PM

I'd be willing to go take a peek if anyone is interested. I live in Beaverton also.

70chevc10 · 03-03-2005, 09:24 PM

is the truck driveable, for like a long trip, possibly back to washington? also, is it lowered? posi? rear end gears? what type of exhaust? any other pics you have would be helpful, maybe some interior pics. oh also, did you do the paint and body work yourself or did you get it done professionally? and do u have the reciepts for all the work that has been done so far? thanks ill let you know if my friend is more interested, hes kinda mad cause he just sold his '88 monte ss

fulltop74 · 03-03-2005, 11:45 PM

Truck is not driveable right now, needs to be assembled. It has been dropped 4-2. Paint and body was professinally done in a shop in Cali. Not sure on the rer end gears NO posi. I will take more pictures of the interior tommorow and post. Anyone interested in viewing this truck in person is more than welcome.

Thanks,
James

fulltop74 · 03-04-2005, 01:07 PM

fulltop74 · 03-04-2005, 01:10 PM

Interior a little dirty from sittin in the garage.

fulltop74 · 03-05-2005, 09:12 PM

Nobody interseted?

fulltop74 · 03-08-2005, 12:07 PM

$6500 Obo

shortbed70 · 03-08-2005, 09:28 PM

I would love to have but I'm in the process of moving 1700 miles east so I'll give you a bump to the top.. Nice truck.

fulltop74 · 03-15-2005, 02:46 PM

$6500 Obo

chevykevy · 03-16-2005, 12:09 AM

I sent you an email via Craigs list. All it needs is the grill and carpet?

fulltop74 · 03-21-2005, 08:17 PM

Alright guys.....I have decided to keep it and finish it, I am going to make a list shortly of what I need. The first thing I want is a restored tach cluster. I will also be attending the Portland swap meet to pick up a few things.

Thanks,
James

03-03-2005, 06:20 PM	#1
fulltop74 Registered User Join Date: May 2004 Location: Beaverton, OR Posts: 50	1970 SWB looking for trade or sale (NW OR) http://portland.craigslist.org/car/62005000.html OK I will try desribe my truck I know I will miss something but here we go. ENGINE, is 350 4 bolt main new aluminum pistons 9.5 to 1 new I beam rods 5.7 new Edelbrock aluminum heads 2.02 intake new Eldelbrock 750 carb new polished intake new chrome pullies new HEI cap/rotor/ wires and pluggs new bowtie expensive wire seperaters tranny is th400 with a B&M holeshot converter 12 bolt rear end BODY, fresh paint inside & out (Patriot Red) I have all lights for the truck and brand new 'Painless wire kit' Needs: to be assembled Needs: grille insert Needs: tailgate Needs: new carpet set ($100 buck or cheaper) I know I am missing a whole bunch of stuff but where are you located maybe you can drop buy and check it out. Please let me know if I can any more questions. James $6.5K OBO, or trade for 85-88 SS Monte Carlo, must be clean __________________ 1974 chevy blazer 2wd, 454, 22 inch wheels 1970 chevy c10, 350, no wheels yet

03-03-2005, 07:29 PM	#3
fulltop74 Registered User Join Date: May 2004 Location: Beaverton, OR Posts: 50	As it sits today..... Attached Images __________________ 1974 chevy blazer 2wd, 454, 22 inch wheels 1970 chevy c10, 350, no wheels yet

03-03-2005, 08:55 PM	#5
silvertonguedevil Senior Member Join Date: May 2004 Location: Seaside, Oregon Posts: 1,789	I'd be willing to go take a peek if anyone is interested. I live in Beaverton also. __________________ -Greg My Chevy trucks, past and present: 1962 C10 SB Fleetside 1964 C10 LB Fleetside BBW 1966 C10 SB Fleetside 1966 C10 SB Fleetside BBW 1968 C10 SB Fleetside 1971 C10 LB Fleetside 1971 C10 SB Fleetside 1972 C10 SB Fleetside Cheyenne 1972 C10 SB Fleetside Cheyenne Super 1972 C10 LB Fleetside Cheyenne Super 1974 C20 Cheyenne 1979 K5 Blazer Cheyenne 1982 K10 SB Fleetside Custom Deluxe 1982 K10 SB Fleetside Scottsdale 1986 C10 SB Fleetside Silverado 2008 Silverado 1500 4x4

03-03-2005, 09:24 PM	#6
70chevc10 Registered User Join Date: Jun 2004 Location: Puyallup, WA Posts: 535	a few questions is the truck driveable, for like a long trip, possibly back to washington? also, is it lowered? posi? rear end gears? what type of exhaust? any other pics you have would be helpful, maybe some interior pics. oh also, did you do the paint and body work yourself or did you get it done professionally? and do u have the reciepts for all the work that has been done so far? thanks ill let you know if my friend is more interested, hes kinda mad cause he just sold his '88 monte ss Last edited by 70chevc10; 03-03-2005 at 09:32 PM.

03-03-2005, 11:45 PM	#7
fulltop74 Registered User Join Date: May 2004 Location: Beaverton, OR Posts: 50	Truck is not driveable right now, needs to be assembled. It has been dropped 4-2. Paint and body was professinally done in a shop in Cali. Not sure on the rer end gears NO posi. I will take more pictures of the interior tommorow and post. Anyone interested in viewing this truck in person is more than welcome. Thanks, James __________________ 1974 chevy blazer 2wd, 454, 22 inch wheels 1970 chevy c10, 350, no wheels yet

03-03-2005, 07:16 PM	#2
70chevc10 Registered User Join Date: Jun 2004 Location: Puyallup, WA Posts: 535	post some pics, i know someone who might be interested in the tacoma washignton area. he just sold an 88 monte last week, but he has a couple others that hes working on and hes been wanting to get a 68-72 swb. post pics and ill have him check it out EDIT: sorry i didnt see the link at the top of the page ill let him know. also, is the truck as it is in those picutres, or does the engine bed and all need to be put in/on the truck?

03-03-2005, 08:45 PM	#4
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Sweet!! Are you should that the pistons are aluminum? (sorry, I'm being a smartass)

03-04-2005, 01:07 PM	#8
fulltop74 Registered User Join Date: May 2004 Location: Beaverton, OR Posts: 50	__________________ 1974 chevy blazer 2wd, 454, 22 inch wheels 1970 chevy c10, 350, no wheels yet

03-04-2005, 01:10 PM	#9
fulltop74 Registered User Join Date: May 2004 Location: Beaverton, OR Posts: 50	Interior a little dirty from sittin in the garage. __________________ 1974 chevy blazer 2wd, 454, 22 inch wheels 1970 chevy c10, 350, no wheels yet

03-05-2005, 09:12 PM	#10
fulltop74 Registered User Join Date: May 2004 Location: Beaverton, OR Posts: 50	Nobody interseted? __________________ 1974 chevy blazer 2wd, 454, 22 inch wheels 1970 chevy c10, 350, no wheels yet

03-08-2005, 12:07 PM	#11
fulltop74 Registered User Join Date: May 2004 Location: Beaverton, OR Posts: 50	$6500 Obo __________________ 1974 chevy blazer 2wd, 454, 22 inch wheels 1970 chevy c10, 350, no wheels yet

03-08-2005, 09:28 PM	#12
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	I would love to have but I'm in the process of moving 1700 miles east so I'll give you a bump to the top.. Nice truck.

03-15-2005, 02:46 PM	#13
fulltop74 Registered User Join Date: May 2004 Location: Beaverton, OR Posts: 50	$6500 Obo __________________ 1974 chevy blazer 2wd, 454, 22 inch wheels 1970 chevy c10, 350, no wheels yet

03-16-2005, 12:09 AM	#14
chevykevy Registered User Join Date: Jan 2004 Location: Wyoming Posts: 641	Nice I sent you an email via Craigs list. All it needs is the grill and carpet?

03-21-2005, 08:17 PM	#15
fulltop74 Registered User Join Date: May 2004 Location: Beaverton, OR Posts: 50	Alright guys.....I have decided to keep it and finish it, I am going to make a list shortly of what I need. The first thing I want is a restored tach cluster. I will also be attending the Portland swap meet to pick up a few things. Thanks, James __________________ 1974 chevy blazer 2wd, 454, 22 inch wheels 1970 chevy c10, 350, no wheels yet



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.