whats a boneyard 72 K20 4x4 worth??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tkeduk8r** · 03-04-2005, 07:59 PM

Well i ahd posted a little on this b4, but i was at the boneyard today and just happened to have my camera on me, so i snapped some pix of this... Don Lovernik had asked me for these too so here ya go... the body is pretty much shot and there is no title for it....the cab has a CCxxxxxxxx vin so it must be a mutt truck.. the motor is a newer 350, the transfer case is an NP205, and it has power disk brakes... the grille is chevrolet but the glovebox literature is GMC (sticker is gone)... so could be three different trucks together... the transfer case shifts as well as the trans and according to the boneyarrd guys it runs... i would love to build a driver 3/4 ton 4x4 but this may be a little too much work... i do have acces to a nice 70 GMC cab and front clip.. hmmmmmmmm.. well let me know... ill also throw in some pix of a 67 C20 283/2bbl b4 my camera went dead...
--Mike

**tkeduk8r** · 03-04-2005, 08:05 PM

coil spring rear.. not much for options...

**tkeduk8r** · 03-04-2005, 08:07 PM

oops the passenger side shot is a 70 c20....
--Mke

**JIMs70GMC** · 03-04-2005, 08:40 PM

offer him $500.

**breeh** · 03-04-2005, 09:46 PM

Not a 3/4 ton brake booster either, definitely a mutt truck. I'd start with an offer of $200.00 personally.

*dtlilly* · 03-04-2005, 09:59 PM

Well, the green truck has 72 doors, off color steering column, is that a big block? (maybe not) has usable bumper guards and a clean grille.... Are those original blue lock outs on the 4X4?

The blue truck is actually a 68 (marker lights).

**tkeduk8r** · 03-04-2005, 10:06 PM

nope not a big block, a 350 i believe but i couldnt get to see the casting numbers.. the carb is a 170xxxxx so at least 76 or later based on that... the grille is good, butt he surround is dented (unclear on pics) above the pass headlight and the bumper has a few love taps too... im just wondering if its worth it for the drivetrain and the few interior (black door panels are clean, as well as shift indicator) pieces... the body cab and box are typical rusted out minnesota style

but hte frame, brakes, trans, and running gear look good... looks like a th400 also... but couldn lay in the mud to get pics....
--Mike

*dtlilly* · 03-04-2005, 10:18 PM

Ya, I see the dented grille surround (pass side). The engine has HEI so maybe later model. The door panels are GMC style. The blue lock outs got my attention, other than that... walk away. (lock outs may be worth $50+).

<edit> If those are factory 16" 3/4 ton rims (solid style 8 lug and not split rims) I'd be interested in those.

72 Cheyenne K20 · 03-04-2005, 10:47 PM

Looks like lots of trucks in one, front bumper from a 67-70. Stock front springs? I love a good project, but thats a whole lot of project. Front hubs look a good buy and if the front springs are factory, them also. I'm with breeh, start at $200.00. If he won't sell can you see if will part it, or if you buy the hubs or front springs let me know.

Scott

**JIMs70GMC** · 03-05-2005, 02:31 PM

Scott, you need some stock front springs? I have the ones that came off of my 71 3/4 ton, they have 3 leaves.

03-04-2005, 07:59 PM	#1
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	whats a boneyard 72 K20 4x4 worth??? pics... Well i ahd posted a little on this b4, but i was at the boneyard today and just happened to have my camera on me, so i snapped some pix of this... Don Lovernik had asked me for these too so here ya go... the body is pretty much shot and there is no title for it....the cab has a CCxxxxxxxx vin so it must be a mutt truck.. the motor is a newer 350, the transfer case is an NP205, and it has power disk brakes... the grille is chevrolet but the glovebox literature is GMC (sticker is gone)... so could be three different trucks together... the transfer case shifts as well as the trans and according to the boneyarrd guys it runs... i would love to build a driver 3/4 ton 4x4 but this may be a little too much work... i do have acces to a nice 70 GMC cab and front clip.. hmmmmmmmm.. well let me know... ill also throw in some pix of a 67 C20 283/2bbl b4 my camera went dead... --Mike Attached Images __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's Last edited by tkeduk8r; 03-04-2005 at 08:36 PM.

03-04-2005, 08:05 PM	#2
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	heres those 67 pix coil spring rear.. not much for options... Attached Images __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

03-04-2005, 08:07 PM	#3
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	oops the passenger side shot is a 70 c20.... --Mke __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

03-04-2005, 08:40 PM	#4
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	offer him $500. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

03-04-2005, 09:46 PM	#5
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Not a 3/4 ton brake booster either, definitely a mutt truck. I'd start with an offer of $200.00 personally. __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

03-04-2005, 09:59 PM	#6
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Well, the green truck has 72 doors, off color steering column, is that a big block? (maybe not) has usable bumper guards and a clean grille.... Are those original blue lock outs on the 4X4? The blue truck is actually a 68 (marker lights). Last edited by dtlilly; 03-04-2005 at 10:10 PM.

03-04-2005, 10:06 PM	#7
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	nope not a big block, a 350 i believe but i couldnt get to see the casting numbers.. the carb is a 170xxxxx so at least 76 or later based on that... the grille is good, butt he surround is dented (unclear on pics) above the pass headlight and the bumper has a few love taps too... im just wondering if its worth it for the drivetrain and the few interior (black door panels are clean, as well as shift indicator) pieces... the body cab and box are typical rusted out minnesota style but hte frame, brakes, trans, and running gear look good... looks like a th400 also... but couldn lay in the mud to get pics.... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

03-04-2005, 10:18 PM	#8
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Ya, I see the dented grille surround (pass side). The engine has HEI so maybe later model. The door panels are GMC style. The blue lock outs got my attention, other than that... walk away. (lock outs may be worth $50+). <edit> If those are factory 16" 3/4 ton rims (solid style 8 lug and not split rims) I'd be interested in those. Last edited by dtlilly; 03-04-2005 at 10:24 PM.

03-04-2005, 10:47 PM	#9
72 Cheyenne K20 Registered User Join Date: Feb 2003 Location: Staunton, Virginia Posts: 554	Looks like lots of trucks in one, front bumper from a 67-70. Stock front springs? I love a good project, but thats a whole lot of project. Front hubs look a good buy and if the front springs are factory, them also. I'm with breeh, start at $200.00. If he won't sell can you see if will part it, or if you buy the hubs or front springs let me know. Scott

03-05-2005, 02:31 PM	#10
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Scott, you need some stock front springs? I have the ones that came off of my 71 3/4 ton, they have 3 leaves. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.