69 GMC f/s or trade $350 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CHEVYE · 03-06-2005, 01:46 PM

69 GMC, clear title, chevy front clip, LONGHORN MAN`S old truck. truck is stipped pretty good, the frame is nice, and trailing arms are excellent. the only good parts on the body are the pass. door, driver fender, and hood. the rest is pretty beat up. the driver door is very rusty, there is a line of rust near the windshield on cab. the bed isn`t rusty at all but it is very well beat up, tailgate is nice on the outside, and rusted on the bottom inside.
will consider trades for ??? i am looking to buy an AR15 next week, for any of you gun guys. i would trade and pay you the difference. also i can haul the truck up to 200 miles for $.60 per loaded mile, thanks, eric.

CHEVYE · 03-06-2005, 01:52 PM

here is the interior, the column is gone. the front tires are good, and the rears are @ about 25%.

1STtimePRo'71 · 03-06-2005, 03:15 PM

The wheels on the fronts of that thing are from a Wagoneer!!!! Sweet!

Longhorn Man · 03-06-2005, 04:42 PM

Yep, Jeep wheels.

Sigh...even though i'm havin fun runnin the longhorn now...I still kinda miss the 'ole girl.
Funny, with no engine, that thing sits like it is supposed to with an engine!

1STtimePRo'71 · 03-06-2005, 09:14 PM

I've got three Wagoneers. I cant convince myself to get rid of them. Even the old lady thinks I should keep them. Funny huh. I wonder if the wheels off of one of them will fit my 71.......Hummmmmm......

If I had a trailer I would buy that truck and come get it. I really think it looks nice, plus I need a project to start "clean" on. If that doesnt sell real soon I will be stunned!

Longhorn Man · 03-06-2005, 09:38 PM

The 71 would be 5 lug...

1STtimePRo'71 · 03-06-2005, 09:44 PM

Quote:

Originally Posted by Longhorn Man

The 71 would be 5 lug...

Actually I just checked I have front disks. No go on the waggy wheels.

CHEVYE · 03-07-2005, 11:42 AM

ttt....

Burnsman · 03-07-2005, 12:06 PM

If it was closer, I'd snag it in a heartbeat. I wanted to buy it when Andy had it, but I was having trouble with my tow vehicle (turned out the brake switch was bad causing the lockup converter to kick in/out & it took 5 mechanics at the chevy garage to figure it out....I wouldn't have guessed it either). Oh well, ttt for ya!

Putter · 03-07-2005, 12:31 PM

That thing must have a HUGE gas tank.....look at where the needle is pointing in the dash picture!!!

TTT for ya'

CHEVYE · 03-07-2005, 01:05 PM

Quote:

Originally Posted by Putter

That thing must have a HUGE gas tank.....look at where the needle is pointing in the dash picture!!!

TTT for ya'

ya know what`s funny (well not really if you`re Andy) the gas tank is filled right up. poor Andy must haved filled her up right before it crapped out. i`d hate to have an engine go on a full tank.

Longhorn Man · 03-07-2005, 09:09 PM

LOL, and as soon as you turn the ignition on, (with a battery installed) it'll go straight up to full.
Funny...the longhorn has a full tank...and it started knocking this morning when the oil pump took a crap as I was spinnin it about 4 grand.

Oh, yeah...bump.

CHEVYE · 03-07-2005, 09:26 PM

DAMN, you got bad luck brother.

Longhorn Man · 03-07-2005, 10:05 PM

only when i'm awake man.

CHEVYE · 03-08-2005, 04:35 PM

no one needs it?

remember trades are welcome.

JBstor · 03-08-2005, 06:22 PM

I would, but it's too far away for me.

JB

GenIIIShorty · 03-08-2005, 08:54 PM

oh, i need it, but i am already working on having a truck shipped from TN. i'll trade ya a 69 short step for it! i paid $350 for it........it's over at craig's house in beach bluff right now.

LUV2XCLR8 · 03-08-2005, 09:21 PM

Quote:

Originally Posted by GenIIIShorty

oh, i need it, but i am already working on having a truck shipped from TN. i'll trade ya a 69 short step for it! i paid $350 for it........it's over at craig's house in beach bluff right now.

BUY EM BOTH

CHEVYE · 03-08-2005, 09:21 PM

Quote:

Originally Posted by GenIIIShorty

oh, i need it, but i am already working on having a truck shipped from TN. i'll trade ya a 69 short step for it! i paid $350 for it........it's over at craig's house in beach bluff right now.

hey man buy em both, i`ll bring it to craig's in 2 weeks with the rest of your parts. tell your driver he's gonna have one heck of a load.

CHEVYE · 03-08-2005, 09:23 PM

hey genIII, you`re gonna like the genIII truck i`m getting for a daily driver tomorrow. i'll post some pics.

GenIIIShorty · 03-08-2005, 11:26 PM

you guys are killin me! if i buy 'em both it'll be even longer before i can ship 'em! besides, i'm only getting such a great deal on the shipping cuz blacky can drive onto the trailer........... i'd love to have both of 'em, though............
yeah, genIII trucks are nice, traded mine in cuz i was paying out the nose for it. bought a '97 and dropped my payment from 527 to 274........i'm in the military so i don't make much money

Longhorn Man · 03-12-2005, 07:22 AM

bump for chevye

03-06-2005, 01:46 PM	#1
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	69 GMC f/s or trade $350 69 GMC, clear title, chevy front clip, LONGHORN MAN`S old truck. truck is stipped pretty good, the frame is nice, and trailing arms are excellent. the only good parts on the body are the pass. door, driver fender, and hood. the rest is pretty beat up. the driver door is very rusty, there is a line of rust near the windshield on cab. the bed isn`t rusty at all but it is very well beat up, tailgate is nice on the outside, and rusted on the bottom inside. will consider trades for ??? i am looking to buy an AR15 next week, for any of you gun guys. i would trade and pay you the difference. also i can haul the truck up to 200 miles for $.60 per loaded mile, thanks, eric. Attached Images __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback Last edited by CHEVYE; 03-06-2005 at 01:50 PM.

03-06-2005, 01:52 PM	#2
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	here is the interior, the column is gone. the front tires are good, and the rears are @ about 25%. Attached Images __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

03-06-2005, 03:15 PM	#3
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	The wheels on the fronts of that thing are from a Wagoneer!!!! Sweet! __________________ -Cory 1967 2 Wheel Chevy

03-06-2005, 09:14 PM	#5
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	I've got three Wagoneers. I cant convince myself to get rid of them. Even the old lady thinks I should keep them. Funny huh. I wonder if the wheels off of one of them will fit my 71.......Hummmmmm...... If I had a trailer I would buy that truck and come get it. I really think it looks nice, plus I need a project to start "clean" on. If that doesnt sell real soon I will be stunned! __________________ -Cory 1967 2 Wheel Chevy

03-07-2005, 11:42 AM	#8
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	ttt.... __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

03-06-2005, 04:42 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Yep, Jeep wheels. Sigh...even though i'm havin fun runnin the longhorn now...I still kinda miss the 'ole girl. Funny, with no engine, that thing sits like it is supposed to with an engine!

03-06-2005, 09:38 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	The 71 would be 5 lug...

03-07-2005, 12:06 PM	#9
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	truck If it was closer, I'd snag it in a heartbeat. I wanted to buy it when Andy had it, but I was having trouble with my tow vehicle (turned out the brake switch was bad causing the lockup converter to kick in/out & it took 5 mechanics at the chevy garage to figure it out....I wouldn't have guessed it either). Oh well, ttt for ya! __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

03-07-2005, 12:31 PM	#10
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	That thing must have a HUGE gas tank.....look at where the needle is pointing in the dash picture!!! TTT for ya' __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

03-07-2005, 09:09 PM	#12
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	LOL, and as soon as you turn the ignition on, (with a battery installed) it'll go straight up to full. Funny...the longhorn has a full tank...and it started knocking this morning when the oil pump took a crap as I was spinnin it about 4 grand. Oh, yeah...bump. Last edited by Longhorn Man; 03-07-2005 at 10:04 PM.

03-07-2005, 09:26 PM	#13
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	DAMN, you got bad luck brother. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

03-07-2005, 10:05 PM	#14
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	only when i'm awake man.

03-08-2005, 04:35 PM	#15
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	no one needs it? remember trades are welcome. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

03-08-2005, 06:22 PM	#16
JBstor Registered User Join Date: Feb 2005 Location: Winnipeg, Manitoba, Canada Posts: 66	I would, but it's too far away for me. JB

03-08-2005, 08:54 PM	#17
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	oh, i need it, but i am already working on having a truck shipped from TN. i'll trade ya a 69 short step for it! i paid $350 for it........it's over at craig's house in beach bluff right now. __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3



Register or Log In To remove these advertisements.

03-08-2005, 09:23 PM	#20
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	hey genIII, you`re gonna like the genIII truck i`m getting for a daily driver tomorrow. i'll post some pics. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

03-08-2005, 11:26 PM	#21
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	you guys are killin me! if i buy 'em both it'll be even longer before i can ship 'em! besides, i'm only getting such a great deal on the shipping cuz blacky can drive onto the trailer........... i'd love to have both of 'em, though............ yeah, genIII trucks are nice, traded mine in cuz i was paying out the nose for it. bought a '97 and dropped my payment from 527 to 274........i'm in the military so i don't make much money __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3

03-12-2005, 07:22 AM	#22
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	bump for chevye

Register or Log In To remove these advertisements.