Short fleet bedsides for sale (DFW) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCOTI · 03-13-2005, 12:16 PM

The drivers side has some damage @ the back under the tail-light housing area. It also has about 6-8 holes drilled on the top of the bedside.

SCOTI · 03-13-2005, 12:20 PM

Pass side has some damage on the lower rear wheel well arch & holes drilled on top of the bedside.

$250ea.
Prefer local sales so you can inspect before you buy.

SCOTI · 03-15-2005, 06:01 PM

Alot of action on this board.... TTT.

SCOTI · 03-18-2005, 02:56 PM

Ttt

**pjmoreland** · 03-18-2005, 04:14 PM

I'd possibly be interested if your price were cut in half.

*screamin_c102* · 03-18-2005, 04:54 PM

Gotta love the LOOOONG beds $250 will get ya a complete bed and the truck its mounted to

Seriously have you tried to ebay them?

SCOTI · 03-18-2005, 05:13 PM

Quote:

Originally Posted by pjmoreland

I'd possibly be interested if your price were cut in half.

They are 1/2 the price of aftermarket, so you can get both bedsides for the price of 1 new repo

.

Quote:

Originally Posted by screamin_c10

Gotta love the LOOOONG beds $250 will get ya a complete bed and the truck its mounted to

Seriously have you tried to ebay them?

Nope. No need yet. This is the second short-fleet bed I've bought so the price isn't out of the realm, (I just don't need the sides). I just need to find the guy that needs them for his project & would prefer to keep the sale local so they can inspect before purchase.

If they don't sell, it's not like they're costing me anything to keep, but I'll keep e-bay in mind if nothing happens.

byrd · 03-18-2005, 10:27 PM

How bout a pic of the inside if the panels? Could these be shipped greyhound? Randy

SCOTI · 03-19-2005, 12:42 AM

Quote:

Originally Posted by byrd

How bout a pic of the inside if the panels? Could these be shipped greyhound? Randy

I'll see what I can do for pics in the AM. From what I've heard, they're just barely within the size limitations of Greyhound, which means possibly not much room on the ends for protective packaging.

SCOTI · 03-20-2005, 08:02 PM

Drivers side:
1) full length shot from the rear
2) close-up @ inside front
3) close-up @ inside rear
4) close-up of tub mounting lip

SCOTI · 03-20-2005, 08:06 PM

Drivers side:
5) top rail, front close-up (5/16" holes)
6) top rail, full length view from front

SCOTI · 03-20-2005, 08:12 PM

Pass side:
1) full length shot from the rear
2) close-up @ inside front
3) close-up @ inside rear
4) close-up of tub mounting lip

SCOTI · 03-20-2005, 08:16 PM

Pass side:
5) top rail, front close-up (5/16" holes)
6) top rail, full length view from rear

SCOTI · 03-21-2005, 08:49 AM

ttt

SCOTI · 03-23-2005, 12:19 AM

Once again..... ttt.

Inspector722 · 03-23-2005, 12:29 AM

Are you going to be at the board meet this Saturday? It maybe worth a look at.

SCOTI · 03-23-2005, 12:01 PM

Yes. I can bring them along if local guys are possibly interested.

SCOTI · 03-25-2005, 01:09 AM

This board gets some serious traffic. Bumped.

SCOTI · 03-29-2005, 12:41 PM

ttt

03-13-2005, 12:16 PM	#1
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	Short fleet bedsides for sale (DFW) The drivers side has some damage @ the back under the tail-light housing area. It also has about 6-8 holes drilled on the top of the bedside. Attached Images __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

03-13-2005, 12:20 PM	#2
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	The other side . . .... Pass side has some damage on the lower rear wheel well arch & holes drilled on top of the bedside. $250ea. Prefer local sales so you can inspect before you buy. Attached Images __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 03-13-2005 at 12:24 PM.

03-15-2005, 06:01 PM	#3
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	Alot of action on this board.... TTT. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

03-18-2005, 02:56 PM	#4
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	Ttt __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

03-20-2005, 08:02 PM	#10
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	More pics of the insides as requested . . . ... Drivers side: 1) full length shot from the rear 2) close-up @ inside front 3) close-up @ inside rear 4) close-up of tub mounting lip Attached Images __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

03-18-2005, 04:14 PM	#5
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,011	I'd possibly be interested if your price were cut in half.

03-18-2005, 04:54 PM	#6
screamin_c102 Account Suspended Join Date: Feb 2005 Location: Yoncalla Oregon Posts: 775	Gotta love the LOOOONG beds $250 will get ya a complete bed and the truck its mounted to Seriously have you tried to ebay them?

03-20-2005, 08:06 PM	#11
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	More drivers side pics . . ..... Drivers side: 5) top rail, front close-up (5/16" holes) 6) top rail, full length view from front Attached Images __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

03-20-2005, 08:12 PM	#12
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	And the other side . . ..... Pass side: 1) full length shot from the rear 2) close-up @ inside front 3) close-up @ inside rear 4) close-up of tub mounting lip Attached Images __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

03-20-2005, 08:16 PM	#13
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	The finale Pass side: 5) top rail, front close-up (5/16" holes) 6) top rail, full length view from rear Attached Images __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

03-21-2005, 08:49 AM	#14
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	ttt __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

03-23-2005, 12:19 AM	#15
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	Once again..... ttt. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

03-23-2005, 12:29 AM	#16
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Are you going to be at the board meet this Saturday? It maybe worth a look at. __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed

03-23-2005, 12:01 PM	#17
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	Yes. I can bring them along if local guys are possibly interested. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

03-25-2005, 01:09 AM	#18
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	This board gets some serious traffic. Bumped. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*



Register or Log In To remove these advertisements.

03-29-2005, 12:41 PM	#19
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	ttt __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

Register or Log In To remove these advertisements.