Wanting to trade drop spindles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

c10chevy69 · 03-13-2005, 08:46 PM

I have discovered that the spindles on my donor truck are drops. I am staying with the stock height so I need some good stock ones to trade for. I might also have shorter springs in the back that can go with them. I don't have them off yet so I can't tell for sure. I will pay for shipping to you if you will pay for shipping to me.

lamar · 03-13-2005, 08:48 PM

Hey let me know what drop they are and I'll trade.

BigBlockBurris · 03-13-2005, 08:49 PM

I have a set of stock spindles I will trade. And I will pay the shipping as you suggest. Let me know. Thanks

BBB

I am in NC 28083

6(sic)6 · 03-13-2005, 08:54 PM

WHAT A DEAL! someone is gonna make OUT GREAT!!!!!!!!!

70chevc10 · 03-13-2005, 09:20 PM

damn! if i wasnt out mowing the lawn i could have caught this deal sooner! ive just been waiting for the time to post my parts for sale, including stock spindles that i wanted to trade for drop! the ones i have were sandblasted so they look pretty good, have been sitting for a yearor two though. also have calipers, tie rods and such. keep me in line i want to get rid of my spindles!

wnc mountain · 03-13-2005, 09:28 PM

put me next in line for sure!!!

c10chevy69 · 03-13-2005, 10:40 PM

Wow!! Thanks for all of the responses guys. I didn't think I would hear from anyone at all much less this fast. I am looking at my ECE catalog and they look the same as the 2.5" drops in there. Anybody have any pictures of their stock ones?

70chevc10 · 03-13-2005, 11:43 PM

Quote:

Originally Posted by c10chevy69

Anybody have any pictures of their stock ones?

here ya go

wannabeburbowner · 03-13-2005, 11:54 PM

Doubt if it will get to me...but I have some stock ones to trade also. Still on truck, I will take them off sandblast them and paint them for you too!!!

later,

Travis

69ShortStep · 03-14-2005, 12:00 AM

I have a nice set of 72 stock spindles from North Carolina and I will be traveling through Oklahoma City on my way to Lawton, OK. I will be there from 3/26 to 4/3.

Let me know if the other deals fall through and you want to meet to avoid shipping.

muddyole 69 · 03-14-2005, 01:44 AM

Wow 2 minutes and a deal is made now that is what this board is all about

70chevc10 · 03-17-2005, 05:53 PM

just out of curiosity who got them?

SCOTI · 03-18-2005, 02:53 PM

If no deals yet, I'm in Dallas & have @ least 1 xtra pair of stock 73-87 style, 1.25" thick rotor spindles & would trade. Put my name in the hat.

03-13-2005, 08:46 PM	#1
c10chevy69 Registered User Join Date: May 2004 Location: Oklahoma City Posts: 205	Wanting to trade drop spindles I have discovered that the spindles on my donor truck are drops. I am staying with the stock height so I need some good stock ones to trade for. I might also have shorter springs in the back that can go with them. I don't have them off yet so I can't tell for sure. I will pay for shipping to you if you will pay for shipping to me. Attached Images __________________ 1969 chevy C10 long bed 350 4bbl auto p/disc and 5 lug

03-13-2005, 08:48 PM	#2
lamar Registered User Join Date: Apr 2004 Location: Covington,Ga Posts: 453	Hey let me know what drop they are and I'll trade. __________________ 72 C-10

03-13-2005, 08:49 PM	#3
BigBlockBurris Registered User Join Date: Nov 2001 Location: Concord,NC,USA Posts: 743	Spindles I have a set of stock spindles I will trade. And I will pay the shipping as you suggest. Let me know. Thanks BBB I am in NC 28083

03-13-2005, 08:54 PM	#4
6(sic)6 Registered User Join Date: Nov 2004 Location: Texas Posts: 199	WHAT A DEAL! someone is gonna make OUT GREAT!!!!!!!!! __________________ Daily Driver: 383 sbc Shaved. lowerd

03-13-2005, 09:20 PM	#5
70chevc10 Registered User Join Date: Jun 2004 Location: Puyallup, WA Posts: 535	damn! if i wasnt out mowing the lawn i could have caught this deal sooner! ive just been waiting for the time to post my parts for sale, including stock spindles that i wanted to trade for drop! the ones i have were sandblasted so they look pretty good, have been sitting for a yearor two though. also have calipers, tie rods and such. keep me in line i want to get rid of my spindles! Last edited by 70chevc10; 03-13-2005 at 09:55 PM.

03-13-2005, 09:28 PM	#6
wnc mountain More hobbies than money! Join Date: Jan 2002 Location: Raleigh, nc, usa Posts: 655	put me next in line for sure!!! __________________ '70 cst10/swb 350, 3 on the tree, factory buckets. '70 GMC lwb 350/350 ps,pb '72 c-10 lwb 350/350 a/c, ps, pb '72 Blazer project

03-13-2005, 10:40 PM	#7
c10chevy69 Registered User Join Date: May 2004 Location: Oklahoma City Posts: 205	Wow!! Thanks for all of the responses guys. I didn't think I would hear from anyone at all much less this fast. I am looking at my ECE catalog and they look the same as the 2.5" drops in there. Anybody have any pictures of their stock ones? __________________ 1969 chevy C10 long bed 350 4bbl auto p/disc and 5 lug

03-13-2005, 11:54 PM	#9
wannabeburbowner Registered User Join Date: Dec 2004 Location: New Philadelphia, Ohio Posts: 253	Doubt if it will get to me...but I have some stock ones to trade also. Still on truck, I will take them off sandblast them and paint them for you too!!! later, Travis

03-14-2005, 12:00 AM	#10
69ShortStep Registered User Join Date: Jan 2004 Location: Canal Winchester, OH Posts: 143	I have a nice set of 72 stock spindles from North Carolina and I will be traveling through Oklahoma City on my way to Lawton, OK. I will be there from 3/26 to 4/3. Let me know if the other deals fall through and you want to meet to avoid shipping. Last edited by 69ShortStep; 03-14-2005 at 12:07 AM.

03-14-2005, 01:44 AM	#11
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	spindles Wow 2 minutes and a deal is made now that is what this board is all about __________________ hav'n fun be'n me

03-17-2005, 05:53 PM	#12
70chevc10 Registered User Join Date: Jun 2004 Location: Puyallup, WA Posts: 535	just out of curiosity who got them?

03-18-2005, 02:53 PM	#13
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	If no deals yet, I'm in Dallas & have @ least 1 xtra pair of stock 73-87 style, 1.25" thick rotor spindles & would trade. Put my name in the hat. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.