Thinning Out the "Parts Stash!" - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Shane* · 03-13-2005, 10:56 PM

These are some parts that I decided were not needed after my latest round of Spring Cleaning.

1969-72 Hood
Nice hood, no major dents, dings, rust or bondo.

$75 OBO - NO SHIPPING - buyer must pick up or arrange shipping.

*Shane* · 03-13-2005, 10:58 PM

GMC Grill with upper bar - unsure of year ... someone help me out.
Great grill for a "driver" ... I have the headlight bezels, but you would want to replace them and I have the "eyebrow" for the driver's side (or I think it's the driver's side ... someone help me out.)

$50 - Would rather NOT ship ... but negotiable.

Tentatively Sold!

*Shane* · 03-13-2005, 11:06 PM

1967-71 Passenger Side Door - with glass, vent window, handles and regulator.
This door does have a hole cut for a speaker. Bottom is as near rust free as can be found down here in Humidity Heaven.

Looks like someone mangled the arm rest trying to get to the regulator ... they didn't make it.

I bought this door out of a local salvage yard with plans on using it ... ended up buying a whole truck for parts with better doors.

$50 OBO - NO SHIPPING - buyer must pick up or arrange shipping.

*Shane* · 03-13-2005, 11:10 PM

3 Speed Column Linkage

I pulled these off of the parts truck I purchased and kept them thinking someone here might need them. They have been sandblasted and painted with POR-15 or chassis black ... can't remember which.

$25 OBO - plus shipping

*Shane* · 03-13-2005, 11:11 PM

The board rules say I have to post a price, but notice the OBO after each listing.

If the price isn't in your budget, let me know ... you may be surprised at the offer's that I will entertain.

I also have several stepside fenders and bed sides for sale ... check this post.

http://67-72chevytrucks.com/vboard/s....php3?t=145691

Longhorn Man · 03-13-2005, 11:21 PM

That GMC grill is a 71/72 unit. It will however bolt to any 69 - 72 as is, or a 67 / 68 with the correct upper bar.

*Shane* · 03-13-2005, 11:24 PM

Thanks Bro! Somehow, I had a funny feeling that you would be the one to answer my question!

rmrtndl · 03-13-2005, 11:31 PM

Hey I noticed your in Athens. Huntsville here!

Which salvage yards around here still have 67-72 trucks? Anything worth looking at near Athens?

I am scouting for a '72 GMC front end. I currently have a Chevy front end but my truck is a GMC so I am looking to swap it out.

Rick

*Shane* · 03-13-2005, 11:39 PM

There are a couple here in Limestone County ... haven't been to either one in the past few months though. Last time I was at one, the owner had a crusher sitting there and was putting vehicles in there as fast as he could. He had a quite a few of "our" model trucks.

Pitt's Salvage Yard is about a mile off of 72 West. Turn left at Posey's Grocery (unsure of the name of the road) and go about a mile ... the yard is on the right. They will let you walk the yard to your heart's content.

The other one is on Alabama Highway 127 north of Athens ... can't remember the name of it. The owner is a nice fellow, but he won't let you walk the yard unless he knows ya.

krue · 03-14-2005, 12:08 AM

Can you e-mail me more pics of the grill to brownlee@zeonchemicals.com ?
Specifically any dents, dings or rust. I also need to know if the top bar has any rust spots popping thru the chrome (like my current one).

krue · 03-14-2005, 12:11 AM

BTW Andy, that grill looks just like the one on my 70. I thought the 71-72 grills had the black highlights.

*Shane* · 03-14-2005, 12:11 AM

The pics that I have post are all that I have currently.

I will be glad to take more for ya if you can tell me what it is ya want to see. The grill is stored at my dad's and it may take me a day or two to get back out there to take more pics.

P.S. This one appears to have HAD the black highlights ... looks like someone polished them off.

krue · 03-14-2005, 12:14 AM

Ah, gotcha. I am really only interested in the top bar if it is straight and rust free (on the shiney side anyways).

*Shane* · 03-14-2005, 12:16 AM

The top bar, to the best of my recollection, is shiney, straight, and FOR SALE.

I will double check for ya and then let you know, sound ok?

krue · 03-14-2005, 12:21 AM

Whatcha want for just the top bar? Would you consider shipping it to me?

Longhorn Man · 03-14-2005, 01:06 AM

if you look in the center of that grill, you can see the recessed area that had been painted.

krue · 03-14-2005, 01:10 AM

Once it was pointed out to me I noticed it. Guess I should look a little closer before I open my big mouth next time.

*Shane* · 03-14-2005, 12:03 PM

TTT - make me an offer on any of it ... or all of it ...

**raggedjim** · 03-14-2005, 05:13 PM

Shane, if you will ship it I'll give you $30.00 for the grill Without the top bar and you can sell the top bar seperately (to KRUE maybe...).

I have a 68 topbar to put on it.

Let me know, Roger

PS. It would ship to 42071

krue · 03-14-2005, 07:50 PM

I'll give ya 20+shipping for the top bar. That way we all get what we need.

*Shane* · 03-15-2005, 12:11 AM

Grill and top bar spoken for .... now to figure out how to ship.

I will be in touch guys.

krue · 03-15-2005, 01:51 AM

I'll pay for you to buy some pvc pipe and a couple of caps to ship the top bar in. Let me know how much and where to send the mo.

**raggedjim** · 03-15-2005, 09:27 AM

Now that's called cooperation...

*Shane* · 03-15-2005, 05:35 PM

Krue: I will gather the packaging stuff this week, pull the top bar this weekend, and try to ship early next week.

raggedjim: I will try to figure out how to package the grill, get it all boxed up, and ship it early next week as well.

I will be in touch to get your addresses as such.

Thanks Guys!!

krue · 03-15-2005, 05:52 PM

Let me know the total and where to send it and it will be on it's way.

03-13-2005, 10:56 PM	#1
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Thinning Out the "Parts Stash!" These are some parts that I decided were not needed after my latest round of Spring Cleaning. 1969-72 Hood Nice hood, no major dents, dings, rust or bondo. $75 OBO - NO SHIPPING - buyer must pick up or arrange shipping. Attached Images Last edited by Shane; 03-14-2005 at 11:56 AM.

03-13-2005, 10:58 PM	#2
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	GMC Grill with upper bar - unsure of year ... someone help me out. Great grill for a "driver" ... I have the headlight bezels, but you would want to replace them and I have the "eyebrow" for the driver's side (or I think it's the driver's side ... someone help me out.) $50 - Would rather NOT ship ... but negotiable. Tentatively Sold! Attached Images Last edited by Shane; 03-15-2005 at 12:13 AM.

03-13-2005, 11:06 PM	#3
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	1967-71 Passenger Side Door - with glass, vent window, handles and regulator. This door does have a hole cut for a speaker. Bottom is as near rust free as can be found down here in Humidity Heaven. Looks like someone mangled the arm rest trying to get to the regulator ... they didn't make it. I bought this door out of a local salvage yard with plans on using it ... ended up buying a whole truck for parts with better doors. $50 OBO - NO SHIPPING - buyer must pick up or arrange shipping. Attached Images

03-13-2005, 11:10 PM	#4
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	3 Speed Column Linkage I pulled these off of the parts truck I purchased and kept them thinking someone here might need them. They have been sandblasted and painted with POR-15 or chassis black ... can't remember which. $25 OBO - plus shipping Attached Images

03-13-2005, 11:11 PM	#5
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	The board rules say I have to post a price, but notice the OBO after each listing. If the price isn't in your budget, let me know ... you may be surprised at the offer's that I will entertain. I also have several stepside fenders and bed sides for sale ... check this post. http://67-72chevytrucks.com/vboard/s....php3?t=145691 Last edited by Shane; 03-14-2005 at 12:03 AM.

03-13-2005, 11:21 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	That GMC grill is a 71/72 unit. It will however bolt to any 69 - 72 as is, or a 67 / 68 with the correct upper bar.

03-13-2005, 11:24 PM	#7
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Thanks Bro! Somehow, I had a funny feeling that you would be the one to answer my question!

03-13-2005, 11:31 PM	#8
rmrtndl Hey ya'll, Watch this! Join Date: Jan 2005 Location: Huntsville, AL Posts: 117	Hey I noticed your in Athens. Huntsville here! Which salvage yards around here still have 67-72 trucks? Anything worth looking at near Athens? I am scouting for a '72 GMC front end. I currently have a Chevy front end but my truck is a GMC so I am looking to swap it out. Rick __________________ Rick M. 72 GMC SWB Fleetside 25 Chevrolet Superior Series Truck 95 Mazda Miata 06 Dodge Charger RT http://ram92.ods.org/blog.html

03-13-2005, 11:39 PM	#9
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	There are a couple here in Limestone County ... haven't been to either one in the past few months though. Last time I was at one, the owner had a crusher sitting there and was putting vehicles in there as fast as he could. He had a quite a few of "our" model trucks. Pitt's Salvage Yard is about a mile off of 72 West. Turn left at Posey's Grocery (unsure of the name of the road) and go about a mile ... the yard is on the right. They will let you walk the yard to your heart's content. The other one is on Alabama Highway 127 north of Athens ... can't remember the name of it. The owner is a nice fellow, but he won't let you walk the yard unless he knows ya.

03-14-2005, 12:08 AM	#10
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Can you e-mail me more pics of the grill to brownlee@zeonchemicals.com ? Specifically any dents, dings or rust. I also need to know if the top bar has any rust spots popping thru the chrome (like my current one). __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

03-14-2005, 12:11 AM	#11
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	BTW Andy, that grill looks just like the one on my 70. I thought the 71-72 grills had the black highlights. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

03-14-2005, 12:14 AM	#13
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Ah, gotcha. I am really only interested in the top bar if it is straight and rust free (on the shiney side anyways). __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

03-14-2005, 12:16 AM	#14
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	The top bar, to the best of my recollection, is shiney, straight, and FOR SALE. I will double check for ya and then let you know, sound ok?

03-14-2005, 12:21 AM	#15
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Whatcha want for just the top bar? Would you consider shipping it to me? __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

03-14-2005, 01:06 AM	#16
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	if you look in the center of that grill, you can see the recessed area that had been painted.



Register or Log In To remove these advertisements.

03-14-2005, 01:10 AM	#17
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Once it was pointed out to me I noticed it. Guess I should look a little closer before I open my big mouth next time. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

03-14-2005, 12:03 PM	#18
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	TTT - make me an offer on any of it ... or all of it ...

03-14-2005, 05:13 PM	#19
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,515	Shane, if you will ship it I'll give you $30.00 for the grill Without the top bar and you can sell the top bar seperately (to KRUE maybe...). I have a 68 topbar to put on it. Let me know, Roger PS. It would ship to 42071 __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743

03-14-2005, 07:50 PM	#20
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	I'll give ya 20+shipping for the top bar. That way we all get what we need. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

03-15-2005, 12:11 AM	#21
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Grill and top bar spoken for .... now to figure out how to ship. I will be in touch guys.

03-15-2005, 01:51 AM	#22
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	I'll pay for you to buy some pvc pipe and a couple of caps to ship the top bar in. Let me know how much and where to send the mo. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

03-15-2005, 09:27 AM	#23
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,515	Now that's called cooperation... __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743

03-15-2005, 05:35 PM	#24
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Krue: I will gather the packaging stuff this week, pull the top bar this weekend, and try to ship early next week. raggedjim: I will try to figure out how to package the grill, get it all boxed up, and ship it early next week as well. I will be in touch to get your addresses as such. Thanks Guys!!

03-15-2005, 05:52 PM	#25
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Let me know the total and where to send it and it will be on it's way. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

Register or Log In To remove these advertisements.