What would you guys say my 72 is worth? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevy72blu · 03-15-2005, 01:52 AM

Hey... Im not interested in selling her... but I've been getting a lot of offers lately, ranging from 16k-24k. My Truck has wayyy too much sentimental value.. but what do you think she's worth?

2nd owner
72 SWB 1/2ton
Camper Special Deluxe
Factory AC/ PS/ PB
Front Disks
4core rad
Trans/AC cooler
Frame off, Nut and bolt Restoration.(8k)
2" Rake
Painted original GM Blue on white, with original repro. trim
90% Stock interior. Slight custom seat upholstery(500)
One of the tighest steering front ends I've ever driven
350(not orig. motor)(4 bolt main, ored .030 out, GM Vortec Heads, Comp 270 Cam, Hooker Supercomp Headers, Edelbrock Performer RPM intake, 1406 carb, Steel Rods, Steel crank, Lunati lifters, Z-28 springs, Flowmaster Stage II mufflers, slightly detailed engine bay.){3k in motor)
BRAND NEW. TCI TH400(B&M RV shift kit, 2500 Stall)
Carbon Steel driveshaft w/ a loop(2k in drivetrain)
15x8" Ultra Magnum's all the way around, in P275/60 rubber(1k)
New front rotors/calipers
New PB booster
New AC Compressor
Hell.. damn near new everything.
GM Truck 12 bolt Rear, 3.73's(Eaton Limited slip)
10% tint on sides/rear, 15% on windshield
Audio: Headunit Alpine 9807[cut dash], Speakers: Alpine Type-R 6x9's in doors, Infinity 2" tweeters in dash. 2 Kicker Comp CVR 10" subs under the seat. Rockford Fosgate 601s. Alpine 90/2 (1,500 in audio)

Truck starts and purrs everytime... Lumpy cam, but a perfect daily driver. Runs 15.27's in the 1/4 on 91 Octane. 9.8:1 compression.

Handles/steers nice and tight. Almost no float in the steering, up to 110 MPH.
Stops beautifuly- Brakes are in perfect condition.

AC blows cold. Heat blows hot.

Runs at 180 degree's, even in vegas heat, on the highway. Excellent Oil PSI.

Professionally painted, but I have over 150 Hours in color sanding/buffing.

Truck is garage kept- waxed and cleaned top to bottom at least once a week.

I realize without the original motor and Trans, the truck is never gonna be suitable to a collector. But being the average joe, who's always wanted a 67-972 SWB.. what would you pay?

-Tanner

dion · 03-15-2005, 02:51 AM

Sweet truck Tanner! Just going from what I've seen in my local truck trader and on ebay I'd say $8,500 to $10,000, like I said I'm just going by what I've seen going around lately but who knows really, I could be way off. If I were you and somebody offered me 24K I'd take it.

dyingdeadman · 03-15-2005, 03:20 AM

its worth what anybody is willing to pay for it.

very sweet truck by the way

Old Dave · 03-15-2005, 07:38 AM

One of the nicest ones I've ever seen. If it was mine and it had sentimental value I would never part with it.

67ChevyRedneck · 03-15-2005, 09:12 AM

When it comes to trucks that nice it's hard to say......

chevy72blu · 03-15-2005, 10:07 AM

Thanks guys... =)

The Interior pic didnt show up =\

67ChevyRedneck · 03-15-2005, 10:12 AM

You said you don't want to sell it..... so can I have it

>X< · 03-15-2005, 11:19 AM

i would think that you could sell it quick for around 12k, but if someone offered you anywhere close to what you have into it i would take it

dubie · 03-15-2005, 11:43 AM

yeah I would say 10- 12,000 easy for that beauty. Just don't include the burnout pics, someone might think of that as abuse

I think it's down right cool tho

Hoods69BadBowTie · 03-15-2005, 01:02 PM

Damn, very nice looking truck you got there. I would not sell it unless you have too. I would take what ever somebody offers you over about 12,000 $$.
-Later

HuggerCST · 03-15-2005, 01:09 PM

Damn nice truck. Mine will be very similar to yours when done, with sentimental value also, and I can tell you that nobody's getting mine for $12,000, lol. Now offers over $20K, I would have to consider. I've seen similar trucks bring high $30s.

**StingRay** · 03-15-2005, 01:55 PM

Nice truck but I am curious about the camper special designation and the 3/4 ton dual diaphragm brake booster. I am pretty sure neither of those ever came stock on anything with a short wheel base. Perhaps the cab is from a 3/4 camper special?

BigDave · 03-15-2005, 05:49 PM

Damn nice truck!

You might want to take this approach.

People ask me all the time how much I'd take for the Blazer or the Cheyenne.

All in all if they offered me what it would cost to buy a 2006 ZO6 C6 Corvette I would CONSIDER it.

chevy72blu · 03-15-2005, 07:08 PM

Hahah I like that Idea BigDave.

Well, these offers were all in post-it notes at car shows... Who knows if they were BS or not. I talked to the guy who offered 24, and I told him his for 26. He never called me back. *shrug*

And Sting Ray, The truck is a 3/4 ton to 1/2 ton conversion- But its been done so cleanly, I rarely mention it(In fact, I forgot to in my post). The only tell tale signs are the resivour, the Deluxe badge on the side, and the leaves in the rear. lol. I was affraid to do it, worrying about hurting the resale value- But from what i've learned, people dont seem to care too much- and the 1/2 tons are worth more in the eyes of the average joe. Like I said earlier, the truck is never gonna be desirable to a collectable because of the motor and trans (which is the only reason why I decided to cut the dash).

I expected numbers like that... But, at Pomona, I've seen trucks very similar to mine go for high 20's, low 30's. But I guess the only thing that matters, is what someones willing to pay. =D

Thanks for the feed back!

>X< · 03-15-2005, 07:42 PM

ooooooohhhh, i didnt see that your dash was cut! i'll give you 2000 for it.

hahaha

03-15-2005, 01:52 AM	#1
chevy72blu Registered User Join Date: Apr 2004 Location: Las Vegas, NV Posts: 2,188	What would you guys say my 72 is worth? Hey... Im not interested in selling her... but I've been getting a lot of offers lately, ranging from 16k-24k. My Truck has wayyy too much sentimental value.. but what do you think she's worth? 2nd owner 72 SWB 1/2ton Camper Special Deluxe Factory AC/ PS/ PB Front Disks 4core rad Trans/AC cooler Frame off, Nut and bolt Restoration.(8k) 2" Rake Painted original GM Blue on white, with original repro. trim 90% Stock interior. Slight custom seat upholstery(500) One of the tighest steering front ends I've ever driven 350(not orig. motor)(4 bolt main, ored .030 out, GM Vortec Heads, Comp 270 Cam, Hooker Supercomp Headers, Edelbrock Performer RPM intake, 1406 carb, Steel Rods, Steel crank, Lunati lifters, Z-28 springs, Flowmaster Stage II mufflers, slightly detailed engine bay.){3k in motor) BRAND NEW. TCI TH400(B&M RV shift kit, 2500 Stall) Carbon Steel driveshaft w/ a loop(2k in drivetrain) 15x8" Ultra Magnum's all the way around, in P275/60 rubber(1k) New front rotors/calipers New PB booster New AC Compressor Hell.. damn near new everything. GM Truck 12 bolt Rear, 3.73's(Eaton Limited slip) 10% tint on sides/rear, 15% on windshield Audio: Headunit Alpine 9807[cut dash], Speakers: Alpine Type-R 6x9's in doors, Infinity 2" tweeters in dash. 2 Kicker Comp CVR 10" subs under the seat. Rockford Fosgate 601s. Alpine 90/2 (1,500 in audio) Truck starts and purrs everytime... Lumpy cam, but a perfect daily driver. Runs 15.27's in the 1/4 on 91 Octane. 9.8:1 compression. Handles/steers nice and tight. Almost no float in the steering, up to 110 MPH. Stops beautifuly- Brakes are in perfect condition. AC blows cold. Heat blows hot. Runs at 180 degree's, even in vegas heat, on the highway. Excellent Oil PSI. Professionally painted, but I have over 150 Hours in color sanding/buffing. Truck is garage kept- waxed and cleaned top to bottom at least once a week. I realize without the original motor and Trans, the truck is never gonna be suitable to a collector. But being the average joe, who's always wanted a 67-972 SWB.. what would you pay? -Tanner __________________ RIP EastSideLowLife '72 C20 SWB convert. 5 lug, LS1/4l60e Last edited by chevy72blu; 03-15-2005 at 10:09 AM.

03-15-2005, 02:51 AM	#2
dion 72 Cheyenne Join Date: Oct 2001 Location: San Diego Posts: 2,086	Sweet truck Tanner! Just going from what I've seen in my local truck trader and on ebay I'd say $8,500 to $10,000, like I said I'm just going by what I've seen going around lately but who knows really, I could be way off. If I were you and somebody offered me 24K I'd take it. __________________ Burnout Idle 1972Cheyenne 1966/67Stouts

03-15-2005, 03:20 AM	#3
dyingdeadman Registered User Join Date: Aug 2004 Location: san marcos,tx Posts: 266	its worth what anybody is willing to pay for it. very sweet truck by the way __________________ 72 GMC sierra 3/4 ton 402 bb 68 GMC 3/4 ton 2010 camaro rs: daily driver

03-15-2005, 07:38 AM	#4
Old Dave Is a bullfrog waterproof? Join Date: Nov 2000 Location: OLATHE, KANSAS Posts: 1,130	One of the nicest ones I've ever seen. If it was mine and it had sentimental value I would never part with it. __________________ "It is better to remain silent and be thought a fool, than to open one's mouth and remove all doubt." Ben Franklin __________________ 1970 Chevy shortbed 2002 Harley Custom Chopper (Long sucker) 1998 K2500 5.7L 5-speed Longbed 1st two are My son's toys...they just live in my garage! 1997 GMC K1500 Suburban 1993 S-10 Blazer 4D (youngest son's daily driver) 2000 Dodge Ram 4WD Ext. Cab (5.9L) Wife is a late year 1951

03-15-2005, 09:12 AM	#5
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	When it comes to trucks that nice it's hard to say...... __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

03-15-2005, 10:07 AM	#6
chevy72blu Registered User Join Date: Apr 2004 Location: Las Vegas, NV Posts: 2,188	Thanks guys... =) The Interior pic didnt show up =\ __________________ RIP EastSideLowLife '72 C20 SWB convert. 5 lug, LS1/4l60e

03-15-2005, 10:12 AM	#7
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	You said you don't want to sell it..... so can I have it __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

03-15-2005, 11:19 AM	#8
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,483	i would think that you could sell it quick for around 12k, but if someone offered you anywhere close to what you have into it i would take it __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

03-15-2005, 11:43 AM	#9
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,855	yeah I would say 10- 12,000 easy for that beauty. Just don't include the burnout pics, someone might think of that as abuse I think it's down right cool tho __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

03-15-2005, 01:02 PM	#10
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Damn, very nice looking truck you got there. I would not sell it unless you have too. I would take what ever somebody offers you over about 12,000 $$. -Later __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

03-15-2005, 01:09 PM	#11
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Damn nice truck. Mine will be very similar to yours when done, with sentimental value also, and I can tell you that nobody's getting mine for $12,000, lol. Now offers over $20K, I would have to consider. I've seen similar trucks bring high $30s. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

03-15-2005, 01:55 PM	#12
StingRay Senior Member Join Date: Mar 2000 Location: Saskatoon,SK,Canada Posts: 2,476	Nice truck but I am curious about the camper special designation and the 3/4 ton dual diaphragm brake booster. I am pretty sure neither of those ever came stock on anything with a short wheel base. Perhaps the cab is from a 3/4 camper special? __________________ Saskatoon, Saskatchewan Canada

03-15-2005, 05:49 PM	#13
BigDave I poop on Ford! Join Date: Apr 2002 Location: Houston Area Posts: 295	Damn nice truck! You might want to take this approach. People ask me all the time how much I'd take for the Blazer or the Cheyenne. All in all if they offered me what it would cost to buy a 2006 ZO6 C6 Corvette I would CONSIDER it. __________________ 1972 Chevy Cheyenne - LWB, factory 402BB 2005 Chevy Suburban LT 2006 Chrysler 300C - SRT8

03-15-2005, 07:08 PM	#14
chevy72blu Registered User Join Date: Apr 2004 Location: Las Vegas, NV Posts: 2,188	Hahah I like that Idea BigDave. Well, these offers were all in post-it notes at car shows... Who knows if they were BS or not. I talked to the guy who offered 24, and I told him his for 26. He never called me back. shrug And Sting Ray, The truck is a 3/4 ton to 1/2 ton conversion- But its been done so cleanly, I rarely mention it(In fact, I forgot to in my post). The only tell tale signs are the resivour, the Deluxe badge on the side, and the leaves in the rear. lol. I was affraid to do it, worrying about hurting the resale value- But from what i've learned, people dont seem to care too much- and the 1/2 tons are worth more in the eyes of the average joe. Like I said earlier, the truck is never gonna be desirable to a collectable because of the motor and trans (which is the only reason why I decided to cut the dash). I expected numbers like that... But, at Pomona, I've seen trucks very similar to mine go for high 20's, low 30's. But I guess the only thing that matters, is what someones willing to pay. =D Thanks for the feed back! __________________ RIP EastSideLowLife '72 C20 SWB convert. 5 lug, LS1/4l60e

03-15-2005, 07:42 PM	#15
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,483	ooooooohhhh, i didnt see that your dash was cut! i'll give you 2000 for it. hahaha __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.