UPDATE: WTB, WTT, or WTS parts for my 67 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Inspector722 · 03-15-2005, 06:28 PM

I added some more Items and some shipping prices.

This will be a new thread to replace my other one. This one has been updated for the things I still need to get and to sale or trade. I am looking to buy or trade for some of these items to help get my 67 back together. Here is a list of some of the things I need. Would like pics of items offered.
1. 67-68 trim ring for grill opening in steel
2. Oval alum. air cleaner
3. Alum. valve cover & oil pan for307 sb
4. Alum. trans pan for 350 turbo
5. Alum. 12 bolt rear end cover
6. Black frame dark tint rear silder (large window)
7. Alum. pully system for sb (crank, alt., wp, & ps)
8. A set of full roller rockers for sb 3/8-1.6
9. Trans. mount for turbo 350
10. The everthing past the frame mounts to the motor for 71' 307 (motor mounts)

Things to sell or trade:
1. Large rear window gasket that has trim, new -$32 (obo) Shipped
2. Door gasket seals, both new -$30 (obo) Shipped
3. Two engine package deal. they are both 250 I6 long blocks with tins. Many extras. New rebuilt 250 head, 3 speed trans, new water pump, new cam shaft for same -$150 (obo) Can bring up 75 miles from 77705 for this price
4. 67-68 hood, surface rust, no dents -$50 (obo) no shipping
5. Polished Alum. overlays for dash, glovebox, and ash tray -$135, $10 shipping
6. Polished Alum.lighted lic. plate frame -$36, $10 Shipped
7. exhaust and intake for I6 -$50 (obo)(No Carb) $15 shipping
8. Large rear window chrome trim -$25 (obo)
9. Leather wrapped steering wheel from 1999 -$125 (obo) $18 shipping
10. Heater core in really good shape -$25 shipped(obo) without a/c
11. Brushed Alum. GMC lic. plate frame -$25, $10 shipping
12. New in box Class 4 Hiiden or step bumer Receiver -$85, ? shipping

Will add more to both list later. Please put post hear to keep everything straight. The shipping us in the 48 states.

rocknrolloutlaw · 03-15-2005, 07:19 PM

Is that carb for sale? If so do you know if it would work on an amc I6 252. The one that was on it was a carter onebarrel?

How much are you lookin to pay for ram manifolds? Me and my dad have 4 different sets.

jtminton · 03-29-2005, 03:56 PM

Are the door gaskets out of an S-10 or anything? I only ask because they seem a little high (21.95pr at chevyduty.com).

Inspector722 · 03-29-2005, 09:54 PM

I made the price including shipping. That should make it cheaper that Chevyduty. They are like the factory originals. Plus I added a few more items.

Inspector722 · 04-05-2005, 01:53 PM

Update and TTT

67chev · 04-06-2005, 04:46 AM

do you have a pic of the polished alum lighted license plate frame??

Inspector722 · 04-06-2005, 07:56 AM

Pics of Lited Lic. plate frames. Two styles.

03-15-2005, 06:28 PM	#1
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	UPDATE: WTB, WTT, or WTS parts for my 67 I added some more Items and some shipping prices. This will be a new thread to replace my other one. This one has been updated for the things I still need to get and to sale or trade. I am looking to buy or trade for some of these items to help get my 67 back together. Here is a list of some of the things I need. Would like pics of items offered. 1. 67-68 trim ring for grill opening in steel 2. Oval alum. air cleaner 3. Alum. valve cover & oil pan for307 sb 4. Alum. trans pan for 350 turbo 5. Alum. 12 bolt rear end cover 6. Black frame dark tint rear silder (large window) 7. Alum. pully system for sb (crank, alt., wp, & ps) 8. A set of full roller rockers for sb 3/8-1.6 9. Trans. mount for turbo 350 10. The everthing past the frame mounts to the motor for 71' 307 (motor mounts) Things to sell or trade: 1. Large rear window gasket that has trim, new -$32 (obo) Shipped 2. Door gasket seals, both new -$30 (obo) Shipped 3. Two engine package deal. they are both 250 I6 long blocks with tins. Many extras. New rebuilt 250 head, 3 speed trans, new water pump, new cam shaft for same -$150 (obo) Can bring up 75 miles from 77705 for this price 4. 67-68 hood, surface rust, no dents -$50 (obo) no shipping 5. Polished Alum. overlays for dash, glovebox, and ash tray -$135, $10 shipping 6. Polished Alum.lighted lic. plate frame -$36, $10 Shipped 7. exhaust and intake for I6 -$50 (obo)(No Carb) $15 shipping 8. Large rear window chrome trim -$25 (obo) 9. Leather wrapped steering wheel from 1999 -$125 (obo) $18 shipping 10. Heater core in really good shape -$25 shipped(obo) without a/c 11. Brushed Alum. GMC lic. plate frame -$25, $10 shipping 12. New in box Class 4 Hiiden or step bumer Receiver -$85, ? shipping Will add more to both list later. Please put post hear to keep everything straight. The shipping us in the 48 states. __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed Last edited by Inspector722; 04-05-2005 at 01:50 PM. Reason: Update List

03-29-2005, 03:56 PM	#3
jtminton II Timothy 4:2 Join Date: Mar 2005 Location: Fort Worth Posts: 361	Are the door gaskets out of an S-10 or anything? I only ask because they seem a little high (21.95pr at chevyduty.com). __________________ 72 C-20 2WD LWB Custom Camper Deluxe 350 4 Speed "Project Lazarus" MY TRUE PRIDE AND JOY "Dangit, Bobby, people will see that oil stain and think I'm a drunk."

03-29-2005, 09:54 PM	#4
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	I made the price including shipping. That should make it cheaper that Chevyduty. They are like the factory originals. Plus I added a few more items. __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed

04-05-2005, 01:53 PM	#5
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Update and TTT __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed

04-06-2005, 04:46 AM	#6
67chev Registered User Join Date: Apr 2004 Location: Spokane, WA Posts: 458	do you have a pic of the polished alum lighted license plate frame?? __________________ "SicStee8" Chevy SWB Fleetside, in progress...500 HP 383 w/TriPower, 700r4, 3.73's, Lowered, Shaved Driprail/sidemarkers/handles/ant, Gonna rock!! '96 Chevy Tahoe 4X4 '84 Chevy C/K10 4X4 (FOR SALE)

03-15-2005, 07:19 PM	#2
rocknrolloutlaw Registered User Join Date: Oct 2004 Location: west virginia Posts: 60	Is that carb for sale? If so do you know if it would work on an amc I6 252. The one that was on it was a carter onebarrel? How much are you lookin to pay for ram manifolds? Me and my dad have 4 different sets.

04-06-2005, 07:56 AM	#7
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	Pics on Frame Pics of Lited Lic. plate frames. Two styles. Attached Images __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.