Spare tank part needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**BOSS** · 03-15-2005, 09:00 PM

I have a spare tank under the bed of my truck and was wondering if anyone would happen to have the neck that goes through the side of the bed?I will try to post pic of what and where i need it.shipping would be to 65717.Thanx

**special-K** · 03-15-2005, 10:21 PM

That could be a tough one to get correct.You could use other filler-neck/piping.It`s all covered by the sheetmetal cover.

**BOSS** · 03-17-2005, 07:31 AM

ttt

72 Cheyenne K20 · 03-20-2005, 01:29 AM

I know a parts yard in central MN that has the parts. I was just up there a few weekends ago. The yard is called Rohners Auto in Wilmar. Tell the guy it's on a white 3/4 ton behind the first 3 rows of chevy's.

Scott

72 Cheyenne K20 · 03-20-2005, 01:33 AM

Hey Boss, if you call this guy and end up getting the parts, tell them not to f up the tank and retaining nuts, I think I may go back in the spring and snag it.

Scott

LUV2XCLR8 · 03-20-2005, 09:01 AM

There Is One Of Those Set-ups In A Yard Here Also, If You
Go To My Homepage, It Says "junkyard", Phone# At The Top

jtminton · 03-22-2005, 03:25 PM

Did you ever get your filler neck hooked up? If so, was the rubber neck grommet a hard part to find? I have a factory spare tank and the rubber around the filler is pretty bad. I wasn't sure if a regular tank one would work.

Thanks

BobS · 03-22-2005, 09:08 PM

Probably just as hard to find in good shape but a Blazer/Jimmy setup is similar. It's a couple of inches longer if I remember correctly.

Bob

**BOSS** · 03-22-2005, 10:31 PM

I havent had any luck so far.I havent got home from work early enough to find out about the junkyards you guys have posted,maybe this weekend.I didnt think they would be this hard to locate.

**BOSS** · 04-17-2005, 08:31 PM

Also need the shifter boot for the transfercase if anyone has one?

**PICKMUP** · 04-17-2005, 09:43 PM

If that is a factory aux tank, it looks like you need the filler pipe and the metal guard that covers it inside the bed...rubber hose & donut for bedside.

teeitup · 04-17-2005, 09:47 PM

James, I just took one of them off a truck. I'll post a pic tomorrow night. Thanks Randy

teeitup · 04-19-2005, 10:40 PM

James, I have this piece, it cam out of a 72 camper special, was an original aux tank. $25 shipped, sorry I don't have any shifter rubber or ring right now. Thanks Randy

**BOSS** · 04-20-2005, 05:47 PM

Randy i think that is what i am looking for,just pm me your paypal addy and i will get it to you ok.Do you still have my address for shipping?Do you have a spare cap around.....lol.

teeitup · 04-20-2005, 10:24 PM

James, I'll pm you pay pal. I should have a decent cap here too. Thanks Randy

dkooi · 04-21-2005, 11:38 AM

Randy, you don't happen to have another one of those do you? Just let me know, THANKS!

teeitup · 04-21-2005, 02:57 PM

Sorry only one I have right now. Thanks

03-15-2005, 09:00 PM	#1
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,893	Spare tank part needed I have a spare tank under the bed of my truck and was wondering if anyone would happen to have the neck that goes through the side of the bed?I will try to post pic of what and where i need it.shipping would be to 65717.Thanx Attached Images __________________ Support our site Norwood Survivor

03-15-2005, 10:21 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	That could be a tough one to get correct.You could use other filler-neck/piping.It`s all covered by the sheetmetal cover. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-17-2005, 07:31 AM	#3
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,893	ttt __________________ Support our site Norwood Survivor

03-20-2005, 09:01 AM	#6
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	There Is One Of Those Set-ups In A Yard Here Also, If You Go To My Homepage, It Says "junkyard", Phone# At The Top __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

03-22-2005, 03:25 PM	#7
jtminton II Timothy 4:2 Join Date: Mar 2005 Location: Fort Worth Posts: 361	Did you ever get your filler neck hooked up? If so, was the rubber neck grommet a hard part to find? I have a factory spare tank and the rubber around the filler is pretty bad. I wasn't sure if a regular tank one would work. Thanks __________________ 72 C-20 2WD LWB Custom Camper Deluxe 350 4 Speed "Project Lazarus" MY TRUE PRIDE AND JOY "Dangit, Bobby, people will see that oil stain and think I'm a drunk."

03-20-2005, 01:29 AM	#4
72 Cheyenne K20 Registered User Join Date: Feb 2003 Location: Staunton, Virginia Posts: 554	I know a parts yard in central MN that has the parts. I was just up there a few weekends ago. The yard is called Rohners Auto in Wilmar. Tell the guy it's on a white 3/4 ton behind the first 3 rows of chevy's. Scott

03-20-2005, 01:33 AM	#5
72 Cheyenne K20 Registered User Join Date: Feb 2003 Location: Staunton, Virginia Posts: 554	Hey Boss, if you call this guy and end up getting the parts, tell them not to f up the tank and retaining nuts, I think I may go back in the spring and snag it. Scott

03-22-2005, 09:08 PM	#8
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 568	Probably just as hard to find in good shape but a Blazer/Jimmy setup is similar. It's a couple of inches longer if I remember correctly. Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel

03-22-2005, 10:31 PM	#9
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,893	I havent had any luck so far.I havent got home from work early enough to find out about the junkyards you guys have posted,maybe this weekend.I didnt think they would be this hard to locate. __________________ Support our site Norwood Survivor

04-17-2005, 08:31 PM	#10
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,893	Also need the shifter boot for the transfercase if anyone has one? __________________ Support our site Norwood Survivor

04-17-2005, 09:43 PM	#11
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,125	If that is a factory aux tank, it looks like you need the filler pipe and the metal guard that covers it inside the bed...rubber hose & donut for bedside. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

04-17-2005, 09:47 PM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	James, I just took one of them off a truck. I'll post a pic tomorrow night. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-19-2005, 10:40 PM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	James, I have this piece, it cam out of a 72 camper special, was an original aux tank. $25 shipped, sorry I don't have any shifter rubber or ring right now. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-20-2005, 05:47 PM	#14
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,893	Randy i think that is what i am looking for,just pm me your paypal addy and i will get it to you ok.Do you still have my address for shipping?Do you have a spare cap around.....lol. __________________ Support our site Norwood Survivor

04-20-2005, 10:24 PM	#15
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	James, I'll pm you pay pal. I should have a decent cap here too. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

04-21-2005, 11:38 AM	#16
dkooi Registered User Join Date: Jan 2003 Location: Mesa, AZ Posts: 173	Randy, you don't happen to have another one of those do you? Just let me know, THANKS!

04-21-2005, 02:57 PM	#17
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Sorry only one I have right now. Thanks __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.