Parting out 70 GMC LWB p/u - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70streetracer · 03-24-2005, 11:19 AM

everything is original down to the motor and tranny. the motor is a 350 and should be a 4 bolt main, TH400 tranny (VERY hard to find and pricey just paid little over a grand for a custom one for my elky) about the only thing im keeping off it is the power steering, and power brakes, and the rearend pumpkin. not using the housing though. the whole front clip is good with little to no rust on it. bumper, and grill are imaculate. hood has some hail damage but that aint hard to get out if you know what your doing. jsut post up what u want and i will tell you what shape its in. he truck is currently in Mt. Ida AR. and i wont be pulling the parts off of it for about 2 more months but if i pull em i need em gone. so let me know what you want in advance.

Jason915 · 03-24-2005, 01:34 PM

I'd be interested in a straight GMC chrome front bumper, and both eyebrow moldings w/ clips if there in good shape.

Feel free to PM me

Zumo · 03-24-2005, 02:25 PM

Hows the bed look?

stickshift_or_walk · 03-24-2005, 03:53 PM

Put me in line for a shot at the bed/tailgate/bumper if they're decent and Zumo passes...

Thanks...SSOW

70streetracer · 03-24-2005, 06:07 PM

the bed is completely rusted through...i highly doubt you'll want that...but the 1/4 panels are fine...tailgate is is in good shape as is the front bumper(no rust). the back bumper is jsut an stock roughneck bumper and it says harris chev. hope Ark. on it...i dont think anyone wikll want that... im gonna try and get soem pics here sometime soon...

stickshift_or_walk · 03-24-2005, 07:04 PM

Not clear on the terminology - what are you calling 1/4 panels? Is it the bed floor that's rusted through, or the sides as well?

Pics - definitely.

Thanks...SSOW

aitch · 03-24-2005, 07:47 PM

How are the doors? I am in the market for rust free doors.

moodybo · 03-24-2005, 08:57 PM

what you want for the engine tranny combo?

RicksTrucks · 03-24-2005, 11:37 PM

Put me in line for more info on the motor

5150 · 03-25-2005, 05:50 AM

Put me in line for the grille. How much and pics.

thanks,

70streetracer · 03-25-2005, 01:56 PM

by 1/4 panel i mena the rear fenders. jsut the bed floor is rusted through. im not quite sure on the doors but i will check on it. for the motor and tranny combo 500+ shipping(300 for tranny, 200 motor. thats what they go for at the junkyards around here anywyas) motor is a 4 bolt main 350 that from what the owner told me has never been rebuilt(so im sure a rebuild wouldnt hurt a dang bit) he did say that it runs and although i have never heard it run the motor does turn over freely and has good compression. but im still tryin to get pics but the truck is 350miles away and none of my family has a dig. cam (much less a computer) so were doin it the old fashion way via mail.

aitch · 03-25-2005, 03:23 PM

I may also be interested in the grill as well as the doors. I'm less than 200 miles from Mt Ida so might be able to pick up.

flip66 · 03-25-2005, 03:24 PM

[QUOTE=70streetracer] the back bumper is jsut an stock roughneck bumper and it says harris chev. hope Ark. on it...i dont think anyone wikll want that...

Is it straight and how much

moodybo · 03-25-2005, 04:51 PM

i will pass on the motor/tranny!

70streetracer · 03-25-2005, 10:41 PM

yea the bumper is sraight..a lil rusty but straight...nothin major but jsut a lil surface rust... as about the doors and grill if you want to go pick them up that would be badazz...say 350 for grill and doors? and u can have the panels, windows (no cracks scrapes anyhitng), anyhting on the door. jsut unbolt the door from the cab and everything on its yours.

5150 · 03-26-2005, 09:30 AM

How much for the grille and to ship it, since i was first in line. Only if we are following the board rules.

70streetracer · 03-26-2005, 06:46 PM

seeing as how i dont know your zip i shall assume that shipping will be round 75 so 225 shipped. as for the bumper i'll take 40 bucks for it + shipping.

5150 · 03-26-2005, 07:15 PM

That's a little more than I have to spend on a grille. I appreciate you giving me a price. I guess see if aitch wants it.

thanks,

Bryan

flip66 · 03-26-2005, 08:12 PM

if your talking about 40.00 for the rear bumper I liven in dallas so there would be no shiping and I would have to look at it before I would be willing to give that

70streetracer · 03-27-2005, 02:35 AM

well how bout 30? and when i brgin all the stuff down we can meet soemwhere so u can pick it up. if you want i have pics of it on my phone that i would be more than ahppy to show you if you wanna meet up anytime soon.

Yellow69 - how much u wantin to spend? pretty much everyhitng im selling i will neg. on. jsut let me know what your wanting to spend. i bet we can work something out.

ps...anyone know of a way to transfer pis off a phone to your computer?

moodybo · 03-27-2005, 09:14 AM

you have to send the pics from your phone to an email. Then just transfer from there.

Bubsco · 03-27-2005, 11:26 AM

Any pic's of the Grille? I am interested. Email me at bubsco@charter.net.

Thanks

flip66 · 03-27-2005, 07:58 PM

you have a pm

03-24-2005, 11:19 AM	#1
70streetracer Registered User Join Date: Jun 2003 Location: plano, TX Posts: 34	Parting out 70 GMC LWB p/u everything is original down to the motor and tranny. the motor is a 350 and should be a 4 bolt main, TH400 tranny (VERY hard to find and pricey just paid little over a grand for a custom one for my elky) about the only thing im keeping off it is the power steering, and power brakes, and the rearend pumpkin. not using the housing though. the whole front clip is good with little to no rust on it. bumper, and grill are imaculate. hood has some hail damage but that aint hard to get out if you know what your doing. jsut post up what u want and i will tell you what shape its in. he truck is currently in Mt. Ida AR. and i wont be pulling the parts off of it for about 2 more months but if i pull em i need em gone. so let me know what you want in advance. __________________ 1970 El Camino 383 stroker infront of a Rock-On built TH400 with stage 3 full manual shift kit and a **** load of other stuff done to the car.... 1998 GMC p/u swb 1956 Ford customline 1970 GMC LWB (parting out) 1927 Ford model T

03-24-2005, 01:34 PM	#2
Jason915 Registered User Join Date: Jan 2005 Location: Colorado Springs Posts: 693	I'd be interested in a straight GMC chrome front bumper, and both eyebrow moldings w/ clips if there in good shape. Feel free to PM me __________________ 1971 GMC K1500 SWB Fleetside, 4" skyjacker softride and, 14 Bolt FF, HD Dana 44 4.10's 1970 K5 TBI conversion lifted etc SOLD 1968 C20 camper truck SOLD “To ban guns because criminals use them is to tell the innocent and law-abiding that their rights and liberties depend not on their own conduct, but on the conduct of the guilty and the lawless.” Jeff Snyder Last edited by Jason915; 03-24-2005 at 01:37 PM. Reason: typo

03-24-2005, 02:25 PM	#3
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	Hows the bed look? __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles

03-24-2005, 03:53 PM	#4
stickshift_or_walk Left Foot Functioning Join Date: May 2004 Location: Duncan, OK Posts: 348	Put me in line for a shot at the bed/tailgate/bumper if they're decent and Zumo passes... Thanks...SSOW __________________ 69 C10 (#1 son's ride) 72 C20 (Dad's farm truck) 82 K30 (Ex - brush pumper project)

03-24-2005, 06:07 PM	#5
70streetracer Registered User Join Date: Jun 2003 Location: plano, TX Posts: 34	the bed is completely rusted through...i highly doubt you'll want that...but the 1/4 panels are fine...tailgate is is in good shape as is the front bumper(no rust). the back bumper is jsut an stock roughneck bumper and it says harris chev. hope Ark. on it...i dont think anyone wikll want that... im gonna try and get soem pics here sometime soon... __________________ 1970 El Camino 383 stroker infront of a Rock-On built TH400 with stage 3 full manual shift kit and a **** load of other stuff done to the car.... 1998 GMC p/u swb 1956 Ford customline 1970 GMC LWB (parting out) 1927 Ford model T

03-24-2005, 07:04 PM	#6
stickshift_or_walk Left Foot Functioning Join Date: May 2004 Location: Duncan, OK Posts: 348	Not clear on the terminology - what are you calling 1/4 panels? Is it the bed floor that's rusted through, or the sides as well? Pics - definitely. Thanks...SSOW __________________ 69 C10 (#1 son's ride) 72 C20 (Dad's farm truck) 82 K30 (Ex - brush pumper project)

03-24-2005, 07:47 PM	#7
aitch Senior Member Join Date: Sep 2004 Location: N.W. Arkansas Posts: 456	How are the doors? I am in the market for rust free doors. __________________ 69 GMC 3/4 ton LWB 383 TH400 Dana 60 '84 300ZX '79 Nova (for sale)

03-24-2005, 08:57 PM	#8
moodybo Registered User Join Date: Oct 2004 Location: Oklahoma Posts: 261	what you want for the engine tranny combo?

03-24-2005, 11:37 PM	#9
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Put me in line for more info on the motor __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

03-25-2005, 05:50 AM	#10
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Put me in line for the grille. How much and pics. thanks, __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

03-25-2005, 01:56 PM	#11
70streetracer Registered User Join Date: Jun 2003 Location: plano, TX Posts: 34	by 1/4 panel i mena the rear fenders. jsut the bed floor is rusted through. im not quite sure on the doors but i will check on it. for the motor and tranny combo 500+ shipping(300 for tranny, 200 motor. thats what they go for at the junkyards around here anywyas) motor is a 4 bolt main 350 that from what the owner told me has never been rebuilt(so im sure a rebuild wouldnt hurt a dang bit) he did say that it runs and although i have never heard it run the motor does turn over freely and has good compression. but im still tryin to get pics but the truck is 350miles away and none of my family has a dig. cam (much less a computer) so were doin it the old fashion way via mail. __________________ 1970 El Camino 383 stroker infront of a Rock-On built TH400 with stage 3 full manual shift kit and a **** load of other stuff done to the car.... 1998 GMC p/u swb 1956 Ford customline 1970 GMC LWB (parting out) 1927 Ford model T

03-25-2005, 03:23 PM	#12
aitch Senior Member Join Date: Sep 2004 Location: N.W. Arkansas Posts: 456	I may also be interested in the grill as well as the doors. I'm less than 200 miles from Mt Ida so might be able to pick up. __________________ 69 GMC 3/4 ton LWB 383 TH400 Dana 60 '84 300ZX '79 Nova (for sale)

03-25-2005, 03:24 PM	#13
flip66 Registered User Join Date: Jan 2004 Location: Garland TX Dallas area Posts: 658	[QUOTE=70streetracer] the back bumper is jsut an stock roughneck bumper and it says harris chev. hope Ark. on it...i dont think anyone wikll want that... Is it straight and how much __________________ 1998 Pontiac Grad Prix GTP 1969 C10 396 TH400 3.08 posi

03-25-2005, 04:51 PM	#14
moodybo Registered User Join Date: Oct 2004 Location: Oklahoma Posts: 261	i will pass on the motor/tranny!

03-25-2005, 10:41 PM	#15
70streetracer Registered User Join Date: Jun 2003 Location: plano, TX Posts: 34	yea the bumper is sraight..a lil rusty but straight...nothin major but jsut a lil surface rust... as about the doors and grill if you want to go pick them up that would be badazz...say 350 for grill and doors? and u can have the panels, windows (no cracks scrapes anyhitng), anyhting on the door. jsut unbolt the door from the cab and everything on its yours. __________________ 1970 El Camino 383 stroker infront of a Rock-On built TH400 with stage 3 full manual shift kit and a **** load of other stuff done to the car.... 1998 GMC p/u swb 1956 Ford customline 1970 GMC LWB (parting out) 1927 Ford model T



Register or Log In To remove these advertisements.

03-26-2005, 09:30 AM	#16
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	How much for the grille and to ship it, since i was first in line. Only if we are following the board rules. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

03-26-2005, 06:46 PM	#17
70streetracer Registered User Join Date: Jun 2003 Location: plano, TX Posts: 34	seeing as how i dont know your zip i shall assume that shipping will be round 75 so 225 shipped. as for the bumper i'll take 40 bucks for it + shipping. __________________ 1970 El Camino 383 stroker infront of a Rock-On built TH400 with stage 3 full manual shift kit and a **** load of other stuff done to the car.... 1998 GMC p/u swb 1956 Ford customline 1970 GMC LWB (parting out) 1927 Ford model T

03-26-2005, 07:15 PM	#18
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	That's a little more than I have to spend on a grille. I appreciate you giving me a price. I guess see if aitch wants it. thanks, Bryan __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

03-26-2005, 08:12 PM	#19
flip66 Registered User Join Date: Jan 2004 Location: Garland TX Dallas area Posts: 658	if your talking about 40.00 for the rear bumper I liven in dallas so there would be no shiping and I would have to look at it before I would be willing to give that __________________ 1998 Pontiac Grad Prix GTP 1969 C10 396 TH400 3.08 posi

03-27-2005, 02:35 AM	#20
70streetracer Registered User Join Date: Jun 2003 Location: plano, TX Posts: 34	well how bout 30? and when i brgin all the stuff down we can meet soemwhere so u can pick it up. if you want i have pics of it on my phone that i would be more than ahppy to show you if you wanna meet up anytime soon. Yellow69 - how much u wantin to spend? pretty much everyhitng im selling i will neg. on. jsut let me know what your wanting to spend. i bet we can work something out. ps...anyone know of a way to transfer pis off a phone to your computer? __________________ 1970 El Camino 383 stroker infront of a Rock-On built TH400 with stage 3 full manual shift kit and a **** load of other stuff done to the car.... 1998 GMC p/u swb 1956 Ford customline 1970 GMC LWB (parting out) 1927 Ford model T

03-27-2005, 09:14 AM	#21
moodybo Registered User Join Date: Oct 2004 Location: Oklahoma Posts: 261	you have to send the pics from your phone to an email. Then just transfer from there.

03-27-2005, 11:26 AM	#22
Bubsco Registered User Join Date: Nov 2004 Location: Grapevine Texas Posts: 29	Grille Any pic's of the Grille? I am interested. Email me at bubsco@charter.net. Thanks __________________

03-27-2005, 07:58 PM	#23
flip66 Registered User Join Date: Jan 2004 Location: Garland TX Dallas area Posts: 658	you have a pm __________________ 1998 Pontiac Grad Prix GTP 1969 C10 396 TH400 3.08 posi

Register or Log In To remove these advertisements.