Charlotte Auto Fair, Need anything? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*stuckonchevy* · 03-25-2005, 06:00 PM

A friend and I are getting together on some spots there and are parting out about four trucks we don't need to be there. Interest? Just basic stuff, but a few rare pieces.

**tnblazerk5** · 03-25-2005, 08:00 PM

what year trucks?

*bisquik65* · 03-25-2005, 08:00 PM

Quote:

Originally Posted by tnblazerk5

what year trucks?

Yea what he said!!

*stuckonchevy* · 03-25-2005, 10:59 PM

Sorry, They are 67 thru 72, I assumed this was the correct area. We have a 67, 68, 70 and a 72.

*stuckonchevy* · 03-25-2005, 11:40 PM

We also have a 69 Burb for parts, I have allready posted on 67-72 burb. This is a complete vehicle so far. It is a half ton two wheel drive, 350/400 ps, pb, full ceiling air. PM with interest for pictures, serious only, thanks.

*bisquik65* · 03-26-2005, 09:24 AM

What area are you going to be,Me and tnblazerk5 are going on friday? Let us know and we will look for you.

*stuckonchevy* · 03-26-2005, 11:20 AM

We will be in the green field LG&MG 51. See you there.

**tnblazerk5** · 03-26-2005, 01:38 PM

theres supost to be a bunch of people meeting sumwhere there sat( sumthing about a board get togeather and food ) but i dont know if i can get there sat or not

*stuckonchevy* · 03-26-2005, 05:54 PM

I will be living there for 4 days so I would appriciate the info on the get together.

**tnblazerk5** · 03-26-2005, 05:56 PM

thats all i know so far

*stuckonchevy* · 03-31-2005, 07:55 PM

We are bringing 5 tilt columns, 2 am/fm radios, a NOS right front fender (69-72) a bunch of grills and radiator supports too. The get together will most likely be at Tim Christens spots in the infield.

*stuckonchevy* · 03-31-2005, 08:04 PM

Oh yeah, We are also bringing 3 tach clusters, one is a Z-28 tach but very nice, the outher two are stock, with new bezels on all three. Also a set of 72 doors and a drivers door for a Burb. Hope we see you there.

**tnblazerk5** · 03-31-2005, 08:18 PM

what are you goina want for a tilt ?

gregbr · 03-31-2005, 11:56 PM

I'd be interested in a tilt, rear bumper brackets for a 67 SWB, power steering pump with brackets. Fellow members usually meet at Tim Christian spot around noon Sat.

gregbr · 03-31-2005, 11:57 PM

I'd be interested in a tilt, rear bumper brackets for a 67 SWB, power steering pump with brackets. Give me some prices. Fellow members usually meet at Tim Christian's spot around noon Sat.

*stuckonchevy* · 04-01-2005, 12:12 AM

Tilts from $225 -275. Bumper brackets would depend on step or fleet and ps pump on 6 or 8. Sorry, I can't leave my spaces on saturday anytime.

Richard Dobson · 04-01-2005, 09:41 AM

How about a 67-68 original rad support?

*stuckonchevy* · 04-01-2005, 11:41 AM

I have a GMC, I may have a Chevy too, as I just bought a pretty decent 68 and I won't be using the support I will check it out today and get back to you.

gregbr · 04-01-2005, 01:48 PM

steering pump for a 4wd SWB with 350, and rear bumper brackets for a SWB fleet. Sorry for not givivng enough detail. Greg

HEAVY CHEVY · 04-04-2005, 06:42 PM

How's the 70 cab?I would be interested if it's not too far gone.

*stuckonchevy* · 04-04-2005, 07:35 PM

You might be responding to a diff. post. Anyway I have several cabs. My best is a CST 69 with complete air. What are you hunting, I probably have it.

**69-z28** · 04-04-2005, 08:39 PM

I am looking for 2 pair Chrome wing vents with soft ray glass .I will be in spaces NG 016 I am flying in from Rochester NY Thursday . Let me know if you have some.

03-25-2005, 06:00 PM	#1
stuckonchevy HI IM TNCHEV UNDER A NEW NAME ! Join Date: Jan 2005 Posts: 86	Charlotte Auto Fair, Need anything? A friend and I are getting together on some spots there and are parting out about four trucks we don't need to be there. Interest? Just basic stuff, but a few rare pieces.

03-31-2005, 11:56 PM	#14
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	I'd be interested in a tilt, rear bumper brackets for a 67 SWB, power steering pump with brackets. Fellow members usually meet at Tim Christian spot around noon Sat. __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

03-31-2005, 11:57 PM	#15
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	I'd be interested in a tilt, rear bumper brackets for a 67 SWB, power steering pump with brackets. Give me some prices. Fellow members usually meet at Tim Christian's spot around noon Sat. __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

04-01-2005, 09:41 AM	#17
Richard Dobson Registered User Join Date: Apr 2003 Location: Easley, South Carolina Posts: 491	How about a 67-68 original rad support? __________________ Richard Dobson

04-01-2005, 11:41 AM	#18
stuckonchevy HI IM TNCHEV UNDER A NEW NAME ! Join Date: Jan 2005 Posts: 86	Rad support I have a GMC, I may have a Chevy too, as I just bought a pretty decent 68 and I won't be using the support I will check it out today and get back to you.

03-25-2005, 08:00 PM	#2
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	what year trucks?

03-25-2005, 10:59 PM	#4
stuckonchevy HI IM TNCHEV UNDER A NEW NAME ! Join Date: Jan 2005 Posts: 86	Sorry, They are 67 thru 72, I assumed this was the correct area. We have a 67, 68, 70 and a 72.

03-25-2005, 11:40 PM	#5
stuckonchevy HI IM TNCHEV UNDER A NEW NAME ! Join Date: Jan 2005 Posts: 86	We also have a 69 Burb for parts, I have allready posted on 67-72 burb. This is a complete vehicle so far. It is a half ton two wheel drive, 350/400 ps, pb, full ceiling air. PM with interest for pictures, serious only, thanks.

03-26-2005, 09:24 AM	#6
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	What area are you going to be,Me and tnblazerk5 are going on friday? Let us know and we will look for you.

03-26-2005, 11:20 AM	#7
stuckonchevy HI IM TNCHEV UNDER A NEW NAME ! Join Date: Jan 2005 Posts: 86	We will be in the green field LG&MG 51. See you there.

03-26-2005, 01:38 PM	#8
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	theres supost to be a bunch of people meeting sumwhere there sat( sumthing about a board get togeather and food ) but i dont know if i can get there sat or not

03-26-2005, 05:54 PM	#9
stuckonchevy HI IM TNCHEV UNDER A NEW NAME ! Join Date: Jan 2005 Posts: 86	I will be living there for 4 days so I would appriciate the info on the get together.

03-26-2005, 05:56 PM	#10
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	thats all i know so far

03-31-2005, 07:55 PM	#11
stuckonchevy HI IM TNCHEV UNDER A NEW NAME ! Join Date: Jan 2005 Posts: 86	We are bringing 5 tilt columns, 2 am/fm radios, a NOS right front fender (69-72) a bunch of grills and radiator supports too. The get together will most likely be at Tim Christens spots in the infield.

03-31-2005, 08:04 PM	#12
stuckonchevy HI IM TNCHEV UNDER A NEW NAME ! Join Date: Jan 2005 Posts: 86	Oh yeah, We are also bringing 3 tach clusters, one is a Z-28 tach but very nice, the outher two are stock, with new bezels on all three. Also a set of 72 doors and a drivers door for a Burb. Hope we see you there.



Register or Log In To remove these advertisements.

03-31-2005, 08:18 PM	#13
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	what are you goina want for a tilt ?

04-01-2005, 12:12 AM	#16
stuckonchevy HI IM TNCHEV UNDER A NEW NAME ! Join Date: Jan 2005 Posts: 86	Tilts from $225 -275. Bumper brackets would depend on step or fleet and ps pump on 6 or 8. Sorry, I can't leave my spaces on saturday anytime.

04-01-2005, 01:48 PM	#19
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	steering pump for a 4wd SWB with 350, and rear bumper brackets for a SWB fleet. Sorry for not givivng enough detail. Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

04-04-2005, 06:42 PM	#20
HEAVY CHEVY BOWTIE FOREVER Join Date: Mar 2002 Location: Sanford,N.C. 23770 Posts: 273	How's the 70 cab?I would be interested if it's not too far gone. __________________ 69 C-10 SHORT FLEET BED 350 4-BOLT/400 turbo upper & lower molding 65 IMPALA 2-DR 283/POWERGLIDE 66 IMPALA 2-DR hopefully 283/350 ~ CAMELTOE ROCKS ~

04-04-2005, 07:35 PM	#21
stuckonchevy HI IM TNCHEV UNDER A NEW NAME ! Join Date: Jan 2005 Posts: 86	Cab You might be responding to a diff. post. Anyway I have several cabs. My best is a CST 69 with complete air. What are you hunting, I probably have it.

04-04-2005, 08:39 PM	#22
69-z28 Registered User Join Date: Feb 2001 Location: Rochester ny usa Posts: 244	Parts I am looking for 2 pair Chrome wing vents with soft ray glass .I will be in spaces NG 016 I am flying in from Rochester NY Thursday . Let me know if you have some.

Register or Log In To remove these advertisements.