1990 K1500 xcab complete parts truck

[Chris H]

10-25-2005 Updating the "available list":
Drivers door $100 (complete with PW and PL)
Tailgate $100 (complete)
Engine 101k miles with serpentine and TBI setup $500 (no wiring or starter)
Seats $200
Putnam Class IV hitch $90 (used for 6 months)
rear end 3:42 open $100
instument panel/gauges 101k miles $50
tilt column $100 (no steering wheel)
wiper motor $30
cruise servo w/cable $30
transfer case $80 (np241 for 700R4)
front driveshaft $25

All prices plus shipping. Feel free to make offers, I want this stuff gone!


*6-7-2005 update*
I am now parting out this truck, pm with your needs.
1990 K1500 4x4 xcab Silverado (See pics below)
5.7 TBI/4L60
104k original miles
3.42 gears
$1500
Has marked, but clear tranferable title.
Red cloth split bench seat in nice condition, as well as matching rear.

I bought this truck from the original owner and used it for a daily driver until October 13,2004 when an elderly gent pulled out in front of my wife while she was going 65mph down the highway. Luckily no serious injuries, just my truck. Basically, almost every peice of sheetmetal on the truck is damaged. The drivers door, drivers fender and tailgate are really the only good pieces left. The right front suspension is pushed back. The radiator barely contacted the rad. fan, but no accessories were damaged, just the radiator. It still runs fine.

I am removing the dual exhaust and rear quarter windows. The rest goes, in little bitty pieces if I have to!
Thanks,
Chris

[454_72_4X4]

I've got a few of those "is this available" questions!
But for the time being, what kinda shape is the left bedside in? Couldn't see it in any of the pics. The right bedside looks like it would be an easy fix?

I'd give ya $15 shipped for that left outside door handle though! (if it's in good shape)

[Chris H]

The left bedside had previous damage from the first owner, and some rust. The right bedside just got a scape dent near the tail light, tweaked enough to make the tailgate not fit so well. The floor is real nice, it had a bedliner in since day 1. I was actually looking for another box to replace this one, as the rest of the truck was in very nice condition. I would sell the box outright if that interests you.
If you look at the last picture, you will see a hole in the side of the van back near the gas fill. That is where the van spun around and hit the back bumper/tail light area of the truck after getting hit on the left front corner.

If I get down to parting the truck, I will keep you in mind on the door handle.
Thanks, Chris

[alpha_male0203]

Hows the drivers mirror? Is there any type of marks? E or M? Shipping 52732 Thanks interested if in great shape and M.

[454_72_4X4]

Originally Posted by Chris H

The left bedside had previous damage from the first owner, and some rust. The right bedside just got a scape dent near the tail light, tweaked enough to make the tailgate not fit so well. The floor is real nice, it had a bedliner in since day 1. I was actually looking for another box to replace this one, as the rest of the truck was in very nice condition. I would sell the box outright if that interests you.
If you look at the last picture, you will see a hole in the side of the van back near the gas fill. That is where the van spun around and hit the back bumper/tail light area of the truck after getting hit on the left front corner.

If I get down to parting the truck, I will keep you in mind on the door handle.
Thanks, Chris

Actually I was hoping the left side was destroyed cause I need a right side! I dunno about the whole bed. PM me a price if ya get a chance and I'll let ya know.
Put me on the list for the left fender too. (if ya part).

[Chris H]

Digging up an old post here, but I am parting this truck out.

[72superBB]

ac compressor shipped to 74631?

does it work?

[Chevyguy111786]

how much for the driver's side headlight lense/assembly if it's the same as 96? shipped to 75044

[Chris H]

pm's returned and pics sent.
Driver's fender, rear sliding window, headlight assembly all sold.

Here are the seats out of this truck: $250 plus shipping (will include rear if wanted for same price, just more shipping).

[alpha_male0203]

Chris thanks for the part and also helping me out. From getting lost couple times. LoL. Dang construction. Well we did make it home after like 4 hours lol. It was a great ride though. Paige was crying for an hours after we left she didnt not wanna leave your son. Well thanks again and keep in touch.

[Chris H]

Shane,
Real nice to meet you! Glad the kids had a good time together, makes for a much more enjoyable visit! Come again anytime!

Here is that link I mentioned: Katzkin

[Chris H]

Items I have left from this truck:
Tailgate $125
Drivers door (power window/lock) $150
Putnam Class IV hitch (almost new) $100
350 TBI engine/700r4 trans/transfer case $700 for all w/accessories
3.42 rear end (non-posi) $250
split bench seat $250 (matching rear is free if wanted)
dash parts (radio,heater control, instrument panel, etc)

Here is what the truck looks like now:

[classic5liter]

hey there. interested in the steering wheel. if you sell that seperate to the column, as i do NOT want the column. how much for it and tack on shippin to 04042. oh that is if you still have the column.

Thank you for your time.

- Al
94 C2500 Cheyenne W/T ext cab. 6.5 box 350 TBI/700R4
87 Oldsmobile Delta 88 Royale 4-door 231 H.O. SFI [work beater]
78 Caprice Classic Landau 350 4bbl 2-bolt/TH400

[Sporty90]

If you still have the seat belts I would be very interested in the center one in the front seat. If so, how much?

[Chris H]

PM sent to classic5liter and sporty90.

[Kevin45]

I am in need of a tight steering box if it bolts to a '92 ( I imagine it does ) shipped to 43078.

Thanks,
Kevin

[Chris H]

Items I have left from this truck:
Tailgate $125
Drivers door (power window/lock) $150
Putnam Class IV hitch (almost new) $100
350 TBI engine/700r4 trans/transfer case $700 for all w/accessories (has the desirable serpentine setup)
3.42 rear end (non-posi) $250
split bench seat $250 (matching rear is free if wanted)
dash parts (radio,heater control, instrument panel, etc)

[RWJJR]

Originally Posted by Chris H

Items I have left from this truck:
Tailgate $125
Drivers door (power window/lock) $150
Putnam Class IV hitch (almost new) $100
350 TBI engine/700r4 trans/transfer case $700 for all w/accessories (has the desirable serpentine setup)
3.42 rear end (non-posi) $250
split bench seat $250 (matching rear is free if wanted)
dash parts (radio,heater control, instrument panel, etc)

how much for the gauge cluster shipped to 37840

[Chris H]

Originally Posted by RWJJR

how much for the gauge cluster shipped to 37840

$65 including shipping. Paypal accepted, or however else you would like to pay. PM if interested.
This is not my dash, but the same style:

[gshibler]

What about the headliner are you selling and if so is it in good shape. what type is it, cloth? If so how much plus shipping

[alf4444]

how much for the tbi setup intake throttle body computer harness etc...

shipped to 84118

[kannonwballz]

Chris,

I need to get a few parts fromk your 1990 1500, if you still have them. I need the panel below the steering column in the dash, also the fuse panel door in the dash, also the glove box door and finally the clear instrument panel cover in the dash. Please e-mail me if you have the parts and a price too.


kannonwballz@yahoo.com

[Chris H]

Originally Posted by kannonwballz

Chris,

I need to get a few parts fromk your 1990 1500, if you still have them. I need the panel below the steering column in the dash, also the fuse panel door in the dash, also the glove box door and finally the clear instrument panel cover in the dash. Please e-mail me if you have the parts and a price too.


kannonwballz@yahoo.com

I will take a look this weekend to see which of those parts I have, and get back to you early next week.

[gshibler]

Do you have the dash trim that goes over the guage cluster and heater and radio controls? It is the last piece to go on, and on mine uses four star head screws. I believe the headlight switch also screws to it. If so how much with shipping.

[hilljob26]

i need a drivers side lower control arm,and the transfer case shifter lever,w/ the knob if possible,and if you have a drivers tow hook,please let me know ,pm me as well,and heck,price me the drivers front half shaft as well,all will be shipped to 67401,shipping should be under 40,if im thinking right,let me know...mike