Pto - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OneBad4x4 · 03-28-2005, 06:01 PM

anyone need one of these? i know nothing about them? its a dana, typical 6 bolt. i also have the cable, knob, etc for engaging it ETC...

i dont know what they are worth, so taking offers.

*bisquik65* · 03-28-2005, 06:19 PM

I will need to see pics, but Hows $50 sound shipped? Very interested,need some pics,Thanks,Erick

OneBad4x4 · 03-28-2005, 06:21 PM

well, depending on how much shipping is, i would like to get 50 in my pocket for it, i can get you pictures, its dirty, i just unbolted it because it was in the way of installing headers on my truck

*bisquik65* · 03-28-2005, 06:25 PM

I will send you $60 bucks total to cover shipping,Will that work? My zip is 28705 Pm me for info,Thanks,Erick

*bisquik65* · 03-28-2005, 06:27 PM

I don't care about it being dirty

Hehehe I could use that thing..

OneBad4x4 · 03-28-2005, 06:43 PM

shipping is 18 dollars. so 65 shipped FIRM

*bisquik65* · 03-28-2005, 06:44 PM

Yes will do the 65 bucks . PM sent thanks,Erick

OneBad4x4 · 03-28-2005, 06:50 PM

pm replied to

**JIMs70GMC** · 03-28-2005, 10:08 PM

What did it come off of? Any p/ns? I know it's sold, just like some info.

OneBad4x4 · 03-29-2005, 12:39 AM

i can get part numbers.... it says dana corparation, from chelsea NC

*bisquik65* · 03-29-2005, 08:13 AM

I sent payment for this allready. Thanks

OneBad4x4 · 04-07-2005, 10:36 PM

Sold

*bisquik65* · 04-08-2005, 08:54 AM

Thanks...Erick

454_72_4X4 · 04-08-2005, 10:32 AM

Just some dumb questions; Was it bolted to the transmission or the transfer case? I've always seen them bolted to the transmission but my wife's truck has one bolted to the tranfer case, (NP205). Any idea if one off of a tranfer case would bolt to a transmission case and match the gears inside, (sm465 or nv4500)?
Any advantages of either?
I'd like to use the "ol lady's" to drive a hydraulic pump for a tilt bed someday!

*bisquik65* · 04-08-2005, 10:44 AM

There are two types,one has a straight cut gear,the other has an angled gear, they will interchange as long as you have the right gear in the trans,the same as the case...And if its on the case,you can put your trans in 1st gear and the case on nuetral for slow,or your trans in 4 gear and case neutral for fast...It does have a few more things you can do on the case...I am running this one i am getting on the aux trans behind a 4 spd...so it will have 12 speeds to run off it..

*bisquik65* · 06-02-2005, 03:19 PM

T I HAVE NOT RECIEVED MY PTO YET AFTER ALL IT WAS THE MARCH 28TH WHEN I SENT PAYMENT AND NOW ITS JUNE 2 AND I HAVE NOTHING......I AM WAITING ONE BAD 4X4 I WANT THE PTO OR MY $65 BUCKS BACK HERE PRETTY SOON...

JOSH :rndll: IF THIS IS NOT TAKEN CARE OF...

**D.PASSMORE** · 06-02-2005, 05:02 PM

I have the same deal going on with this kid. He owes me $70.00 for parts that he said he shipped a month ago. Now he says that last week he mailed a MO for a refund. I haven't seen it yet. Josh emailed me about this guy and said that he was getting the facts together to bust this boy.

So, buyers beware, he has a bad track record with other boards and clubs. I checked his background and contacted a few people and got his email addy and a cell phone number. He answered with " I'm sorry, its all my fault". I don't who is worse, him or cdowns, who scamed me out of $100.00 on a promise that he didn't back up. But, other than that, I've bought alot of parts off other members and never had a problem.

Lets see if this guy makes the next thread under the botboy story at the top of this board.

*bisquik65* · 06-02-2005, 06:15 PM

I am felling the same way here....Something needs to be done or by by you go off this cool place on the web... .

He told me 2 weeks ago he sent a refund,nothing has gotten here yet? Sould like the same thing happened to you....

Quote:

Originally Posted by D.PASSMORE

I have the same deal going on with this kid. He owes me $70.00 for parts that he said he shipped a month ago. Now he says that last week he mailed a MO for a refund. I haven't seen it yet. Josh emailed me about this guy and said that he was getting the facts together to bust this boy.

So, buyers beware, he has a bad track record with other boards and clubs. I checked his background and contacted a few people and got his email addy and a cell phone number. He answered with " I'm sorry, its all my fault". I don't who is worse, him or cdowns, who scamed me out of $100.00 on a promise that he didn't back up. But, other than that, I've bought alot of parts off other members and never had a problem.

Lets see if this guy makes the next thread under the botboy story at the top of this board.

***Liz*** · 06-02-2005, 06:47 PM

guys, he onebad doesn't have access to the parts boards while this is being taken care of.... All memebrs involved have been contacted. I know it sucks and we have been working on trying to get it resolved.

*bisquik65* · 06-02-2005, 06:55 PM

Thank you very much Liz...I know this stuff shouldn't happen,

U-know

Rod · 06-02-2005, 07:55 PM

I'd step up and make good there OneBad4x4 before someone grabs a piece of lumber about that 4x4 size.

**D.PASSMORE** · 06-02-2005, 10:29 PM

Alright, I've thrown everybody off the cliff that has PO'd me on this board. I'm sorry, I meant it. Everyone else, you are great and for this board, thank god. Oh yeah, also Josh and Rod.

Rod, By the way, I need that set of caliper mount / rotor covers for a Dana-44. You had a set of full covers included in a picture that I viewed. Are they still available? Can you PM me with the details?

I did purchase a set

you know

Thanks and if I offened anyone else, my apologies...

Rod · 06-02-2005, 10:54 PM

bisquik65..here's the PTO I did a PM to you about tonight. The grease is free too.

D.Passmore. Caliper brackets...yep still have them all...so which ones were you interested in. Maybe I can send you the pic again if you need to check.

Rod

*bisquik65* · 06-03-2005, 08:34 AM

That will work just fine...I will swap that stuff...Thanks,Erick

Rod · 06-03-2005, 07:53 PM

And so it's all packed up and went in the mail today fully insured and with a toll free 1-800 number or internet access tracking system...so OneBad4x4 thats how it's done "The Right Way."

So bisquik is going to get one regardless of any tall tales.

Details are all in a PM to you bisquik65....but I know you already read that PM.

D.Passmore...your Dana 44 backing plates went in the mail today too...same deal..insured and trackable. All in PM to you also.
Rod

03-28-2005, 06:01 PM	#1
OneBad4x4 Lifted70BowTie Join Date: Jul 2004 Location: Bakersfield, CA Posts: 204	Pto anyone need one of these? i know nothing about them? its a dana, typical 6 bolt. i also have the cable, knob, etc for engaging it ETC... i dont know what they are worth, so taking offers. __________________ I live in Bakersfield, CA 93308, I use USPS for shipping. (Even tho I've never shipped anything and am currently banned for failure to send out parts.) Please reply to my for sale threads by PMing me. Its hard to keep track of all the threads.

03-28-2005, 06:21 PM	#3
OneBad4x4 Lifted70BowTie Join Date: Jul 2004 Location: Bakersfield, CA Posts: 204	well, depending on how much shipping is, i would like to get 50 in my pocket for it, i can get you pictures, its dirty, i just unbolted it because it was in the way of installing headers on my truck __________________ I live in Bakersfield, CA 93308, I use USPS for shipping. (Even tho I've never shipped anything and am currently banned for failure to send out parts.) Please reply to my for sale threads by PMing me. Its hard to keep track of all the threads.

03-28-2005, 06:43 PM	#6
OneBad4x4 Lifted70BowTie Join Date: Jul 2004 Location: Bakersfield, CA Posts: 204	shipping is 18 dollars. so 65 shipped FIRM __________________ I live in Bakersfield, CA 93308, I use USPS for shipping. (Even tho I've never shipped anything and am currently banned for failure to send out parts.) Please reply to my for sale threads by PMing me. Its hard to keep track of all the threads.

03-28-2005, 06:50 PM	#8
OneBad4x4 Lifted70BowTie Join Date: Jul 2004 Location: Bakersfield, CA Posts: 204	pm replied to __________________ I live in Bakersfield, CA 93308, I use USPS for shipping. (Even tho I've never shipped anything and am currently banned for failure to send out parts.) Please reply to my for sale threads by PMing me. Its hard to keep track of all the threads.

03-28-2005, 10:08 PM	#9
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	What did it come off of? Any p/ns? I know it's sold, just like some info. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

03-28-2005, 06:19 PM	#2
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	I will need to see pics, but Hows $50 sound shipped? Very interested,need some pics,Thanks,Erick

03-28-2005, 06:25 PM	#4
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	I will send you $60 bucks total to cover shipping,Will that work? My zip is 28705 Pm me for info,Thanks,Erick

03-28-2005, 06:27 PM	#5
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	I don't care about it being dirty Hehehe I could use that thing..

03-28-2005, 06:44 PM	#7
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Yes will do the 65 bucks . PM sent thanks,Erick

03-29-2005, 12:39 AM	#10
OneBad4x4 Lifted70BowTie Join Date: Jul 2004 Location: Bakersfield, CA Posts: 204	i can get part numbers.... it says dana corparation, from chelsea NC __________________ I live in Bakersfield, CA 93308, I use USPS for shipping. (Even tho I've never shipped anything and am currently banned for failure to send out parts.) Please reply to my for sale threads by PMing me. Its hard to keep track of all the threads.

03-29-2005, 08:13 AM	#11
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	I sent payment for this allready. Thanks

04-07-2005, 10:36 PM	#12
OneBad4x4 Lifted70BowTie Join Date: Jul 2004 Location: Bakersfield, CA Posts: 204	Sold __________________ I live in Bakersfield, CA 93308, I use USPS for shipping. (Even tho I've never shipped anything and am currently banned for failure to send out parts.) Please reply to my for sale threads by PMing me. Its hard to keep track of all the threads.

04-08-2005, 08:54 AM	#13
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Thanks...Erick

04-08-2005, 10:32 AM	#14
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Just some dumb questions; Was it bolted to the transmission or the transfer case? I've always seen them bolted to the transmission but my wife's truck has one bolted to the tranfer case, (NP205). Any idea if one off of a tranfer case would bolt to a transmission case and match the gears inside, (sm465 or nv4500)? Any advantages of either? I'd like to use the "ol lady's" to drive a hydraulic pump for a tilt bed someday! __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

04-08-2005, 10:44 AM	#15
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	There are two types,one has a straight cut gear,the other has an angled gear, they will interchange as long as you have the right gear in the trans,the same as the case...And if its on the case,you can put your trans in 1st gear and the case on nuetral for slow,or your trans in 4 gear and case neutral for fast...It does have a few more things you can do on the case...I am running this one i am getting on the aux trans behind a 4 spd...so it will have 12 speeds to run off it.. Last edited by bisquik65; 04-08-2005 at 10:47 AM.



Register or Log In To remove these advertisements.

06-02-2005, 03:19 PM	#16
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	T I HAVE NOT RECIEVED MY PTO YET AFTER ALL IT WAS THE MARCH 28TH WHEN I SENT PAYMENT AND NOW ITS JUNE 2 AND I HAVE NOTHING......I AM WAITING ONE BAD 4X4 I WANT THE PTO OR MY $65 BUCKS BACK HERE PRETTY SOON... JOSH :rndll: IF THIS IS NOT TAKEN CARE OF...

06-02-2005, 05:02 PM	#17
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Yeah! another one... scam artist! I have the same deal going on with this kid. He owes me $70.00 for parts that he said he shipped a month ago. Now he says that last week he mailed a MO for a refund. I haven't seen it yet. Josh emailed me about this guy and said that he was getting the facts together to bust this boy. So, buyers beware, he has a bad track record with other boards and clubs. I checked his background and contacted a few people and got his email addy and a cell phone number. He answered with " I'm sorry, its all my fault". I don't who is worse, him or cdowns, who scamed me out of $100.00 on a promise that he didn't back up. But, other than that, I've bought alot of parts off other members and never had a problem. Lets see if this guy makes the next thread under the botboy story at the top of this board. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

06-02-2005, 06:47 PM	#19
*Liz* Catchy title goes here.. Join Date: Mar 2002 Location: Rockwell, NC Posts: 39,767	guys, he onebad doesn't have access to the parts boards while this is being taken care of.... All memebrs involved have been contacted. I know it sucks and we have been working on trying to get it resolved.

06-02-2005, 06:55 PM	#20
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Thank you very much Liz...I know this stuff shouldn't happen, U-know

06-02-2005, 07:55 PM	#21
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	I'd step up and make good there OneBad4x4 before someone grabs a piece of lumber about that 4x4 size. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

06-02-2005, 10:29 PM	#22
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Ookaay Alright, I've thrown everybody off the cliff that has PO'd me on this board. I'm sorry, I meant it. Everyone else, you are great and for this board, thank god. Oh yeah, also Josh and Rod. Rod, By the way, I need that set of caliper mount / rotor covers for a Dana-44. You had a set of full covers included in a picture that I viewed. Are they still available? Can you PM me with the details? I did purchase a set you know Thanks and if I offened anyone else, my apologies... __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

06-02-2005, 10:54 PM	#23
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	bisquik65..here's the PTO I did a PM to you about tonight. The grease is free too. D.Passmore. Caliper brackets...yep still have them all...so which ones were you interested in. Maybe I can send you the pic again if you need to check. Rod Attached Images __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

06-03-2005, 08:34 AM	#24
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	That will work just fine...I will swap that stuff...Thanks,Erick

06-03-2005, 07:53 PM	#25
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	And so it's all packed up and went in the mail today fully insured and with a toll free 1-800 number or internet access tracking system...so OneBad4x4 thats how it's done "The Right Way." So bisquik is going to get one regardless of any tall tales. Details are all in a PM to you bisquik65....but I know you already read that PM. D.Passmore...your Dana 44 backing plates went in the mail today too...same deal..insured and trackable. All in PM to you also. Rod __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

Register or Log In To remove these advertisements.