73-87 bench seat? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TheRedRooster · 04-01-2005, 05:56 PM

wondering If you can slip a 73-87 bench seat right in to a 67-72 cab? is it to wide? do the rails line up?

bobs409 · 04-02-2005, 07:35 AM

My 69 has a bench from a mid 70's GMC. It was in it when I bought the truck but looks good, width is great. New holes in the floor were drilled and 3 inch spacers were added which puts the rear seat back right at the bottom of the window.

TheRedRooster · 04-04-2005, 01:52 AM

Thanks for the feed back. This info will come in handy.

04-01-2005, 05:56 PM	#1
TheRedRooster Registered User Join Date: Dec 2004 Location: The bowels of Los Angeles Posts: 68	73-87 bench seat? wondering If you can slip a 73-87 bench seat right in to a 67-72 cab? is it to wide? do the rails line up?

04-02-2005, 07:35 AM	#2
bobs409 1969 Custom 30 wrecker Join Date: Sep 2001 Location: Pottsville, Pa Posts: 2,611	My 69 has a bench from a mid 70's GMC. It was in it when I bought the truck but looks good, width is great. New holes in the floor were drilled and 3 inch spacers were added which puts the rear seat back right at the bottom of the window. __________________ Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10

04-04-2005, 01:52 AM	#3
TheRedRooster Registered User Join Date: Dec 2004 Location: The bowels of Los Angeles Posts: 68	Thanks for the feed back. This info will come in handy.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.