S&K facom tools comparable to the tool truck stuff? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

>X< · 04-02-2005, 04:35 PM

i've been buying alot of S&K tools lately. i bought a set of deep impact standard and metric sockets and a rad hose clamp tool last month. i need a torque wrench soon. i get a REALLY good price from my buddies at the paint store on this stuff. how close is S&K to the tool truck stuff? these sockets are almost the same price as the snap on's i think, and the rad hose clamp tool was 85 compared to 140 for MAC, but it has better features. i dont want to hear any "huck huck, i buy harbor freight" stuff, just informed opinions from people who have used both. thanks, sean

>X< · 04-02-2005, 04:42 PM

this is what i've gotten from them so far

http://www.skhandtool.com/productcat...token=11656502
http://www.skhandtool.com/productcat...token=11656502
http://www.skhandtool.com/productcat...token=11656502

the last one lists for 120, haha, i paid 75 bucks, thats a hookup!

>X< · 04-02-2005, 04:44 PM

lookin at this one.

http://www.skhandtool.com/productcat...token=11656502

>X< · 04-02-2005, 04:46 PM

crap, links didnt work

Stingray42 · 04-02-2005, 04:46 PM

sk doesnt have lifetiem warrenty do they?
soem of the guys at the shop use it, mostly the bigger truck (1" plus) cuz its so much cheaper, and not likely to break. I have mostly mastercraft and some snap-on in my box

>X< · 04-02-2005, 04:48 PM

i dont care about lifetime warranty, as long as it wont break.

i've never heard of mastercraft, where do you get them from?

Old Dave · 04-02-2005, 04:56 PM

SK tools are good ones. I bought my 3/8 set in 1969 and haven't lost anything or broken anything.

Stingray42 · 04-02-2005, 05:22 PM

Quote:

Originally Posted by >X<

i dont care about lifetime warranty, as long as it wont break.

i've never heard of mastercraft, where do you get them from?

'as long as it doesnt break' are the key words...
mastercraft in Canadian Tire, obviously Canadian. Their tools, to me are comparable to snap on but at a fraction of the cost

***Josh*** · 04-02-2005, 06:19 PM

SK have a lifetime warranty, and they are strong, but to me getting them warrantied etc. it's les shassle to buy craftsman tools and jsut take a load of em to sears every weekend... When I can I buy snapon adn matco, I avoid alot of MAC stuff cause their sockets flat out suck.... Most my tools are Snap-on and craftsman, now I will say MAC makes some real nice plier sets.....

junkyardjohn · 04-02-2005, 06:48 PM

S-K MAKES SOME REALLY GOOD TOOLS & I BELIEVE THEY ARE LIFETIME WARRENTEED. I DON'T HAVE ANY EXCEPT IN MY JUNK YARD BAGS. . (& THATS ALOT. I CARRY MORE TOOLS INTO THE JUNKYARDS THAN MOST PEOPLE HAVE IN THEIR GARAGES) I HAVE ALL SNAP-ON SOCKETS ,(ABOUT 2 DOZ. RAILS) RATCHETTS, & AIR TOOLS & ALL MAC WRENCHES(ABOUT 10 OR 12 SETS) I HAVE A TON OF MONEY TIED UP IN SNAP-ON & MAC TOOLS. SAYING MASTERCRAFT TOOLS ARE COMPARABLE TO SNAP-ON AT A FRACTION OF THE PRICE IS LIKE COMPARING A JEEP CJ7 TO A HUMMER.

& IF THE S-K SOCKETS ARE ABOUT THE SAME PRICE AS SNAP-ONs, SOMEONE IS BENDING YOU OVER. BET YOU NEVER HEARD OF A SNAP-ON OR MAC TRUCK OWNER GOING OUT OF BUSINESS OR FILING BANKRUPSY(SP). I REALIZE THEY ARE OVERPRICED, BUT THEY ARE NIIIIICE. I FIGURE WITH ALL THE MONEY I'M SAVING BY NOT DOING COCAINE, & HANGING OUT IN BARS..... WELL I'M TAKING PART OF THAT MONEY & BUYING REALLY NICE TOOLS. MY BOYS ARE ALL GROWN UP NOW, & WHILE THEY WERE GROWING UP, THE MOST EXPENSIVE TOOLS I HAD WERE CRAFTSMAN.THEY WERE HARD ON TOOLS.

JOHN

RON WOODGEARD · 04-02-2005, 09:20 PM

I also have S&K's that have been with me since the early 70's I have only broke one.... And when you take a breaker bar and add a 3 foot section of pipe to a 3/8s drive socket, ( I was broke down and that's all I had with me) It's no-ones fault but your own when it breaks, No matter what brand it is.

I still have screwdrivers, Sockets, and wrenches from back in time.... Nothing wrong with them.

LUV2XCLR8 · 04-02-2005, 10:13 PM

I'VE HAD MY S&K STUFF FOR ABOUT 17 YEARS, HELD UP GREAT

*dtlilly* · 04-02-2005, 10:40 PM

I have Craftman and S&K. S&K are good tools, and easier to get warrantee. Instead of waiting for the Snap-On truck to come once a week, just drive to their business that sells S&K, and get a new tool today.

krue · 04-02-2005, 11:13 PM

Used a lot of S&K tools in the Navy, never saw one break.

Fred T · 04-02-2005, 11:52 PM

SK tools can be a good buy for the money. I used to be able to buy them locally for jobber price, but the business sold and I can't get the discount from the new owner. E-bay and www.thetoolwarehouse.net usually have good prices. Far superior to craftsman, which have lost a lot of quality in the last 30 years. Not as high of quality as Snap-On, but nowhere near the price. I've been slowly replacing all of my craftsman with SK, just do some bargain shopping. Their torque wrenches are great, comparable to Proto.

*dtlilly* · 04-03-2005, 03:09 AM

Quote:

Originally Posted by Fred T

SK tools can be a good buy for the money.... Their torque wrenches are great,...

Thanks for the good advise, I'm looking for a good (and cheap) torque wrench. I don't want to spend $300+, and end up with some thing that needs calibration every year.

RON WOODGEARD · 04-03-2005, 08:23 AM

Quote:

Originally Posted by dtlilly

Thanks for the good advise, I'm looking for a good (and cheap) torque wrench. I don't want to spend $300+, and end up with some thing that needs calibration every year.

Don,

There's a way to calibrate at home.. An Old man ( yea, Older than Me

) Taught me lots of years ago, And danged ifin I didn't forget !!!

Anyone here remember it??

junkyardjohn · 04-03-2005, 11:25 AM

Quote:

Originally Posted by dtlilly

Thanks for the good advise, I'm looking for a good (and cheap) torque wrench. I don't want to spend $300+, and end up with some thing that needs calibration every year.

DON... I'M NOT SURE HOW MUCH YOUR PLANNING ON SPENDING, BUT I CAN USUALLY PICK UP SWIVEL HEAD(EITHER 3/8" OR 1/2") SNAP-ON TORQUE WRENCHES FOR WELL UNDER $100 & MAC TOOLS TORQUE WRENCHES FOR UNDER $60, USED AT LOCAL PAWN SHOPS. I HAVE A 3/8" 100 LB & A 1/2" DR. 250 LB SWIVEL HEAD SNAP-ON TORQUE WRENCHES & OFTEN COMPARE THE READINGS ON BOTH TO EACH OTHER. CHEAP TORQUE WRENCHES REQUIRE CALIBRATIONS AT LEAST AS MUCH AS GOOD ONES. HARBOUR FREIGHT HAS THEM FOR $13 OR $14, SO I GUESS IT'S JUST A MATTER OF PERSONAL PREFERANCE. LET ME KNOW IF YOU WOULD LIKE ME TO FIND YOU ONE.

JOHN

I HAD A CHINEEZE UNCLE THAT ALWAYS USED TO SAY....
GOOD NO CHEAP.....CHEAP NO GOOD

*dtlilly* · 04-03-2005, 01:09 PM

John, I've seen them used at a pawn shop too, but your taking a chance the wrench was used as a breaker bar. Sears has them at a decent price too. I'd like to know about that "at-home" calibration trick if anyone knows.

Elsie72 · 04-03-2005, 02:03 PM

I've bought some SK tools, and they seem like good enough quality. The only gripe I have, is the smaller 1/2" impact sockets are all made from the same sized stock, so the smaller ones have a larger socket outside diameter, and won't fit in some holes, but that may not be something unique to SK, and definitely maintains the socket's strength.

>X< · 04-03-2005, 02:13 PM

some good advice here, pretty much what i expected. way better than craftsmen, not as nice as snapon. the torque wrench that i linked to was like 650 bucks (pn 74600) what are the snapon? a grand? thanks for the replies

junkyardjohn · 04-03-2005, 03:42 PM

MODEL TQFR250E FLEX WRENCH, MICROMETER STYLE ADJUSTMENT, CLICK-TYPE TORQUE WRENCH IS $239.70 WITHOUT THE FLEX-HEAD FEATURE IS TQF250 AT $212.50 . NOT AS BAD AS EVERYONE THOUGHT.

JOHN

Tx Firefighter · 04-03-2005, 03:48 PM

I have to admit that I'm completely obsessed with my tools. Almost to an unhealthy level some say.

I have some SK tools, and a lot of the predecesor to them, SK Wayne tools. They are a great fit to my hand and are a true pleasure to use. I don't break many tools anymore either. I've assembled the tools I need to do most jobs, and using the best tool for the job alleviates breakage for me. Back when I had fewer tools, I had to do stupid stuff like long cheater handles and such, and I used to break tools that way. All of them, even Snap-On will break if abused.

Hoods69BadBowTie · 04-03-2005, 03:58 PM

My dad has some S&K tools he has had since he was a kid and besides being dinged up and a little rusty they work as good as if they were brand new. He told me he has had most of them for about 30 years and only broke one socket wrench. He swears by them and I have used them pretty hard on my Blazer and had no problems at all with them.
-Later

mingoman · 04-03-2005, 10:05 PM

I have more S&K tools than anything else. Around here getting them to replace any broken ones is about like pullin' teeth. I've only had 5 or so break in 20+ years of use though.

04-02-2005, 04:35 PM	#1
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,481	S&K facom tools comparable to the tool truck stuff? i've been buying alot of S&K tools lately. i bought a set of deep impact standard and metric sockets and a rad hose clamp tool last month. i need a torque wrench soon. i get a REALLY good price from my buddies at the paint store on this stuff. how close is S&K to the tool truck stuff? these sockets are almost the same price as the snap on's i think, and the rad hose clamp tool was 85 compared to 140 for MAC, but it has better features. i dont want to hear any "huck huck, i buy harbor freight" stuff, just informed opinions from people who have used both. thanks, sean __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

04-02-2005, 04:42 PM	#2
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,481	this is what i've gotten from them so far http://www.skhandtool.com/productcat...token=11656502 http://www.skhandtool.com/productcat...token=11656502 http://www.skhandtool.com/productcat...token=11656502 the last one lists for 120, haha, i paid 75 bucks, thats a hookup! __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

04-02-2005, 04:44 PM	#3
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,481	lookin at this one. http://www.skhandtool.com/productcat...token=11656502 __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

04-02-2005, 04:46 PM	#4
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,481	crap, links didnt work __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

04-02-2005, 04:46 PM	#5
Stingray42 Woot. Join Date: Jan 2003 Location: Stouffville, Ontario Posts: 2,291	sk doesnt have lifetiem warrenty do they? soem of the guys at the shop use it, mostly the bigger truck (1" plus) cuz its so much cheaper, and not likely to break. I have mostly mastercraft and some snap-on in my box __________________ Clarkson 96 Chevy RCLB 4.3 2WD

04-02-2005, 04:48 PM	#6
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,481	i dont care about lifetime warranty, as long as it wont break. i've never heard of mastercraft, where do you get them from? __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

04-02-2005, 04:56 PM	#7
Old Dave Is a bullfrog waterproof? Join Date: Nov 2000 Location: OLATHE, KANSAS Posts: 1,130	SK tools are good ones. I bought my 3/8 set in 1969 and haven't lost anything or broken anything. __________________ "It is better to remain silent and be thought a fool, than to open one's mouth and remove all doubt." Ben Franklin __________________ 1970 Chevy shortbed 2002 Harley Custom Chopper (Long sucker) 1998 K2500 5.7L 5-speed Longbed 1st two are My son's toys...they just live in my garage! 1997 GMC K1500 Suburban 1993 S-10 Blazer 4D (youngest son's daily driver) 2000 Dodge Ram 4WD Ext. Cab (5.9L) Wife is a late year 1951

04-02-2005, 06:19 PM	#9
*Josh* He's got mean nasty FANGS! Join Date: Dec 1999 Location: Rockwell, NC Posts: 6,514	SK have a lifetime warranty, and they are strong, but to me getting them warrantied etc. it's les shassle to buy craftsman tools and jsut take a load of em to sears every weekend... When I can I buy snapon adn matco, I avoid alot of MAC stuff cause their sockets flat out suck.... Most my tools are Snap-on and craftsman, now I will say MAC makes some real nice plier sets..... __________________ 2004 K2500 Burb 1999 C3500 1985 Cutlass Supreme 1969 C-10 1967 C-10 Panel josh@67-72chevytrucks.com

04-02-2005, 06:48 PM	#10
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	S-K MAKES SOME REALLY GOOD TOOLS & I BELIEVE THEY ARE LIFETIME WARRENTEED. I DON'T HAVE ANY EXCEPT IN MY JUNK YARD BAGS. . (& THATS ALOT. I CARRY MORE TOOLS INTO THE JUNKYARDS THAN MOST PEOPLE HAVE IN THEIR GARAGES) I HAVE ALL SNAP-ON SOCKETS ,(ABOUT 2 DOZ. RAILS) RATCHETTS, & AIR TOOLS & ALL MAC WRENCHES(ABOUT 10 OR 12 SETS) I HAVE A TON OF MONEY TIED UP IN SNAP-ON & MAC TOOLS. SAYING MASTERCRAFT TOOLS ARE COMPARABLE TO SNAP-ON AT A FRACTION OF THE PRICE IS LIKE COMPARING A JEEP CJ7 TO A HUMMER. & IF THE S-K SOCKETS ARE ABOUT THE SAME PRICE AS SNAP-ONs, SOMEONE IS BENDING YOU OVER. BET YOU NEVER HEARD OF A SNAP-ON OR MAC TRUCK OWNER GOING OUT OF BUSINESS OR FILING BANKRUPSY(SP). I REALIZE THEY ARE OVERPRICED, BUT THEY ARE NIIIIICE. I FIGURE WITH ALL THE MONEY I'M SAVING BY NOT DOING COCAINE, & HANGING OUT IN BARS..... WELL I'M TAKING PART OF THAT MONEY & BUYING REALLY NICE TOOLS. MY BOYS ARE ALL GROWN UP NOW, & WHILE THEY WERE GROWING UP, THE MOST EXPENSIVE TOOLS I HAD WERE CRAFTSMAN.THEY WERE HARD ON TOOLS. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

04-02-2005, 09:20 PM	#11
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	I also have S&K's that have been with me since the early 70's I have only broke one.... And when you take a breaker bar and add a 3 foot section of pipe to a 3/8s drive socket, ( I was broke down and that's all I had with me) It's no-ones fault but your own when it breaks, No matter what brand it is. I still have screwdrivers, Sockets, and wrenches from back in time.... Nothing wrong with them.

04-02-2005, 10:13 PM	#12
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	I'VE HAD MY S&K STUFF FOR ABOUT 17 YEARS, HELD UP GREAT __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

04-02-2005, 10:40 PM	#13
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	I have Craftman and S&K. S&K are good tools, and easier to get warrantee. Instead of waiting for the Snap-On truck to come once a week, just drive to their business that sells S&K, and get a new tool today.

04-02-2005, 11:13 PM	#14
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Used a lot of S&K tools in the Navy, never saw one break. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

04-02-2005, 11:52 PM	#15
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	SK tools can be a good buy for the money. I used to be able to buy them locally for jobber price, but the business sold and I can't get the discount from the new owner. E-bay and www.thetoolwarehouse.net usually have good prices. Far superior to craftsman, which have lost a lot of quality in the last 30 years. Not as high of quality as Snap-On, but nowhere near the price. I've been slowly replacing all of my craftsman with SK, just do some bargain shopping. Their torque wrenches are great, comparable to Proto. __________________ Fred There is no such thing as too much cam...just not enough engine.

04-03-2005, 01:09 PM	#19
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	John, I've seen them used at a pawn shop too, but your taking a chance the wrench was used as a breaker bar. Sears has them at a decent price too. I'd like to know about that "at-home" calibration trick if anyone knows.



Register or Log In To remove these advertisements.

04-03-2005, 02:03 PM	#20
Elsie72 Chinook Arch Join Date: Feb 2005 Location: High River, Alberta, Canada Posts: 218	I've bought some SK tools, and they seem like good enough quality. The only gripe I have, is the smaller 1/2" impact sockets are all made from the same sized stock, so the smaller ones have a larger socket outside diameter, and won't fit in some holes, but that may not be something unique to SK, and definitely maintains the socket's strength. __________________ 1972 GMC 1500 Custom - Bought used by Grandpa in '74, currently back on the road after a long hiatus. Elsie's truck 2.5" dual exhaust with Hooker Aero Chambers Holley 670 Street Avenger Edelbrock Performer RPM on GMPP 290HP 350 ECE drop 3.5/5

04-03-2005, 02:13 PM	#21
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,481	some good advice here, pretty much what i expected. way better than craftsmen, not as nice as snapon. the torque wrench that i linked to was like 650 bucks (pn 74600) what are the snapon? a grand? thanks for the replies __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

04-03-2005, 03:42 PM	#22
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	MODEL TQFR250E FLEX WRENCH, MICROMETER STYLE ADJUSTMENT, CLICK-TYPE TORQUE WRENCH IS $239.70 WITHOUT THE FLEX-HEAD FEATURE IS TQF250 AT $212.50 . NOT AS BAD AS EVERYONE THOUGHT. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

04-03-2005, 03:48 PM	#23
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	I have to admit that I'm completely obsessed with my tools. Almost to an unhealthy level some say. I have some SK tools, and a lot of the predecesor to them, SK Wayne tools. They are a great fit to my hand and are a true pleasure to use. I don't break many tools anymore either. I've assembled the tools I need to do most jobs, and using the best tool for the job alleviates breakage for me. Back when I had fewer tools, I had to do stupid stuff like long cheater handles and such, and I used to break tools that way. All of them, even Snap-On will break if abused. __________________ I'm on the Instagram- @Gearhead_Kevin

04-03-2005, 03:58 PM	#24
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	My dad has some S&K tools he has had since he was a kid and besides being dinged up and a little rusty they work as good as if they were brand new. He told me he has had most of them for about 30 years and only broke one socket wrench. He swears by them and I have used them pretty hard on my Blazer and had no problems at all with them. -Later __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

04-03-2005, 10:05 PM	#25
mingoman Registered User Join Date: May 2004 Location: Miss Co Arkansas Posts: 679	I have more S&K tools than anything else. Around here getting them to replace any broken ones is about like pullin' teeth. I've only had 5 or so break in 20+ years of use though. __________________ 76/77/78 Cheyenne 1997 K3500 454 soon to be 496

Register or Log In To remove these advertisements.