I need a center section - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Putter · 04-05-2005, 03:53 PM

Does anyone out there have a good dash center section (or complete dash)....one that is NOT CUT for a new radio? I am in need of one.

Want to sell yours or want to trade for something?? I have lots of original stuff from an inline/tree-speed truck if you need anything. I have steering column, driveshaft, linkages, clutch pedal assemblies, radiator, motor, tranny, etc....

Thanks to anyone who has one.
ERIC

Burnsman · 04-05-2005, 04:34 PM

I have an uncut center dash section from a 70. $25 shipped to you. Let me know if you need pics or anything. Brian

Putter · 04-05-2005, 04:57 PM

Pics would be great. If too large for this thread, you can e-mail to
PuttersCustomConcepts@Yahoo.com

Burnsman · 04-05-2005, 09:55 PM

Here's a pic. Let me know. Thanks. Brian

Putter · 04-06-2005, 08:44 AM

Was that cut with a torch? I need one that is cut closer to the center of the cluster/glovebox openings. I will have to pass.

Burnsman · 04-06-2005, 08:58 AM

No problem. I also have a complete dash that was unbloted from the sides and cut w/ a sawzall in front of the factory spot welds. It is complete, but will cost more to ship. It would be about $45 shipped. Brian

cwilli84 · 04-06-2005, 02:21 PM

I'll see if the section I have is closer to what you're looking for Putter.

Putter · 04-06-2005, 02:25 PM

Thanks. And if you have a pic, that'd help out.

cwilli84 · 04-06-2005, 02:59 PM

I think the one I have is cut closer to the center section, not further to the outsides.

04-05-2005, 03:53 PM	#1
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	I need a center section Does anyone out there have a good dash center section (or complete dash)....one that is NOT CUT for a new radio? I am in need of one. Want to sell yours or want to trade for something?? I have lots of original stuff from an inline/tree-speed truck if you need anything. I have steering column, driveshaft, linkages, clutch pedal assemblies, radiator, motor, tranny, etc.... Thanks to anyone who has one. ERIC __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

04-05-2005, 04:34 PM	#2
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Dash Section I have an uncut center dash section from a 70. $25 shipped to you. Let me know if you need pics or anything. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

04-05-2005, 04:57 PM	#3
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Pics would be great. If too large for this thread, you can e-mail to PuttersCustomConcepts@Yahoo.com __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

04-05-2005, 09:55 PM	#4
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	dash Here's a pic. Let me know. Thanks. Brian Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

04-06-2005, 08:44 AM	#5
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Was that cut with a torch? I need one that is cut closer to the center of the cluster/glovebox openings. I will have to pass. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

04-06-2005, 08:58 AM	#6
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	center No problem. I also have a complete dash that was unbloted from the sides and cut w/ a sawzall in front of the factory spot welds. It is complete, but will cost more to ship. It would be about $45 shipped. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

04-06-2005, 02:21 PM	#7
cwilli84 1FINE69 Join Date: Aug 2003 Location: Detroit, Michigan Posts: 239	I'll see if the section I have is closer to what you're looking for Putter. __________________ Had a 69 swb fleetside 350zz3 w 400turbo trans oak lined bed with rhino coated sides red exterior. SOLD

04-06-2005, 02:25 PM	#8
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Thanks. And if you have a pic, that'd help out. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

04-06-2005, 02:59 PM	#9
cwilli84 1FINE69 Join Date: Aug 2003 Location: Detroit, Michigan Posts: 239	I think the one I have is cut closer to the center section, not further to the outsides. __________________ Had a 69 swb fleetside 350zz3 w 400turbo trans oak lined bed with rhino coated sides red exterior. SOLD



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.