WTB: auto to SM465 Conversion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shelby987 · 04-07-2005, 12:51 PM

I think I may have found a blazer to my liking (and more importantly price range) but its an automatic, and I would really prefer to have a manual. I wanted to know if anyone has all the parts required to make this conversion happen (bell housing, pedals, transfer case (or require adaptors), transmission, flywheel, cross member, and anything else I may have left out. The truck was a manual

but was converted by the previous owner, so I don't think I will need a new column at all.

Thanks
-Lee

teeitup · 04-07-2005, 12:53 PM

I got the whole setup here in Ks.

71swb4x4 · 04-07-2005, 01:44 PM

Not sure where you are, but I am doing the opposite swap on my pickup so I have everything as well - in South Dakota.
The input shaft on your Transfer Case is most likely different too, the Automatic and Manual Trannies have different output shafts.

ryanroo · 04-07-2005, 03:19 PM

i have a complete set up from the bellhousing to the transfer case, but no crossmembers (yours should work). i just took it out to put the NV4500 in. i am in SW iowa. i also have the clutch fork and transmission shifter, but not the 205 shifter. the splined coupler is in good shape. let me know if you are interested and i can get more details/price for ya
Ryan

meathead95 · 04-07-2005, 09:40 PM

i have everything as well in nashville

shelby987 · 04-08-2005, 07:51 AM

I am very happy to see how many ppl are replying to this thread, if you could please PM me with a general idea of the condition of the parts (recent rebuild, needs rebuild, etc) as well as a cost, and a location so I can figure out what shipping would be from where you are to Ann Arbor Michigan.
Thanks
-Lee

ZOOMY · 04-11-2005, 01:06 AM

I have a rebuil M465, rebuilt NP205 & good used everything else. Can deliver 1/2 way for free. PM sent.

meathead95 · 04-11-2005, 07:25 AM

i was talking about a 2wd setup is your blazer 2wd or 4wd?

04-07-2005, 12:51 PM	#1
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	WTB: auto to SM465 Conversion I think I may have found a blazer to my liking (and more importantly price range) but its an automatic, and I would really prefer to have a manual. I wanted to know if anyone has all the parts required to make this conversion happen (bell housing, pedals, transfer case (or require adaptors), transmission, flywheel, cross member, and anything else I may have left out. The truck was a manual but was converted by the previous owner, so I don't think I will need a new column at all. Thanks -Lee

04-07-2005, 12:53 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	I got the whole setup here in Ks. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-07-2005, 01:44 PM	#3
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Not sure where you are, but I am doing the opposite swap on my pickup so I have everything as well - in South Dakota. The input shaft on your Transfer Case is most likely different too, the Automatic and Manual Trannies have different output shafts. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

04-07-2005, 03:19 PM	#4
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	i have a complete set up from the bellhousing to the transfer case, but no crossmembers (yours should work). i just took it out to put the NV4500 in. i am in SW iowa. i also have the clutch fork and transmission shifter, but not the 205 shifter. the splined coupler is in good shape. let me know if you are interested and i can get more details/price for ya Ryan __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

04-07-2005, 09:40 PM	#5
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	i have everything as well in nashville __________________ 72 2wd blazer 72 swb 4x4

04-08-2005, 07:51 AM	#6
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	I am very happy to see how many ppl are replying to this thread, if you could please PM me with a general idea of the condition of the parts (recent rebuild, needs rebuild, etc) as well as a cost, and a location so I can figure out what shipping would be from where you are to Ann Arbor Michigan. Thanks -Lee

04-11-2005, 01:06 AM	#7
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	PM Sent I have a rebuil M465, rebuilt NP205 & good used everything else. Can deliver 1/2 way for free. PM sent.

04-11-2005, 07:25 AM	#8
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	i was talking about a 2wd setup is your blazer 2wd or 4wd? __________________ 72 2wd blazer 72 swb 4x4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.