|
06-08-2002, 11:35 PM
|
#1 |
|
Registered User
Join Date: Jun 2000
Location: Bismarck, ND
Posts: 4,296
|
AC in a Non-AC Burb?
I was just wondering if It's possible to put AC into a 90 Burb that was not equipped with AC from the factory. If I found a donor truck or Burb would it be possible to move all the parts over? Has anyone ever done this with success? Were there any major changes in the AC design over the run of this series? 73-87 or 91 for the Burbs) Should I look for special year ranges when locating parts?
__________________
Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club. |
|
|
|
06-10-2002, 02:24 AM
|
#2 |
|
My other Love
Join Date: Aug 2001
Location: Castlegar B.C. Canada
Posts: 4,085
|
it is possible but of course it is a pain in the a,ss becuase th oles in the firewall are not the same But it can be done with much paintence, good luck!
__________________
Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life |
|
|
|
|
06-30-2002, 11:18 PM
|
#3 |
|
One of my kids. Cute eh?
Join Date: Oct 2001
Location: Mitchell, SD
Posts: 1,286
|
Yeah...like Hooter says, you will need to do some filling and cutting on the firewall. I'm in the middle of a project like this. I ended up buying a different cab that had the AC in it. But I did not replace the cab for that reason. The old cab was just too rusty to fix. But if you have a donor truck, the project should be fairly simple.
Here is my website: www.angelfire.com/sd2/82crewcab/index.html Later Mike |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
