For Sale: 37" Goodyear Wrangler MTs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

b454rat · 04-10-2005, 06:35 PM

Didn't really know where to put this, and didn't want to put it in every parts board. I have a 4 brand new 37x12.5x16.5 Goodyear Wrangler MT RADIALS that I want to get rid of. They have never seen pavement, and about 1/4 mile of offroad time. They mostly were driven back and forth from behind my parents house to the garage, and in the snow some. They still have the nipples on the tread. I got them to run on my truck rather than the bias mudders, but I'm not gonna be putting the truck on the road anytime soon, and these are just sitting around doing nothing. I looked online for prices, the cheapest I've found was $421, and Four Wheel Parts wants over $500, (on some serious crack

). I've seen used ones on Ebay go for $700-800 for 85-90%. Asking $750, can meet halfway depending where, or can ship them. I have some pics in my link below, go to the album marked tires.

ryanroo · 04-10-2005, 06:52 PM

You sure would have these for sale when its about 3-4 months before i would need them and just before i start to make any money (summer) oh well coming from new york the shipping would probably kill me
RYan

**special-K** · 04-10-2005, 09:50 PM

I`m in the same boat w/ryanroo.I want bigger tires to mount on the 9.75x16.5 OEM-types after I put the D60/14bolt and lift under the Highlander.16.5 choices are getting limited.

**kwmech** · 04-11-2005, 10:16 PM

Too bad they are not for a 17'' rim, I'd grab those in a hearbeat

**special-K** · 04-13-2005, 07:15 AM

Lookin`for anything we could trade???I got stuff.

b454rat · 04-14-2005, 07:14 PM

Special K, what do you have?? I need fenders and inners, patch panels, etc for my 62 suburban. I *might* be looking for a set of 35s for 16" rims. Getting the pieces together to do a front axle swap in my 97, and might look funny with 33s on it. Right now though I could use the money (who couldn't) I found a carb for my car that is a screaming deal, and would make my car scream as well. It also needs a new radiator and front tires. I don't check this board as much as I used to, so if anyone wants to call, feel free. 607-237-0067.

**special-K** · 04-17-2005, 07:29 AM

Hmmm,I do have a set of 35"Pro-Comp X-terrains on 10x16 white spokes waiting to go on the truck that I would use your tires on.Brand new,never mounted,just waitin`on a lift.Like most people,you probably don`t care for the wagon wheels.They wore out on me years ago.I thought they`d look good on my blue`n`white`72.

b454rat · 04-17-2005, 05:32 PM

I have set on my 89, but I don't care about looks on that. I have a set of 15x8s painted aluminum on my 97 with the factory centers on it, doens't look too bad. Right now I just want to sell them, I could really use the money. If I don't sell them soon, I will take them to Bloomsburg along with a Dana 60 that I have, and maybe some SAS brackets that I had made up.

vtblazer · 04-17-2005, 05:47 PM

How far are you from central VT?

Are they still mounted?

04-10-2005, 06:35 PM	#1
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,469	For Sale: 37" Goodyear Wrangler MTs Didn't really know where to put this, and didn't want to put it in every parts board. I have a 4 brand new 37x12.5x16.5 Goodyear Wrangler MT RADIALS that I want to get rid of. They have never seen pavement, and about 1/4 mile of offroad time. They mostly were driven back and forth from behind my parents house to the garage, and in the snow some. They still have the nipples on the tread. I got them to run on my truck rather than the bias mudders, but I'm not gonna be putting the truck on the road anytime soon, and these are just sitting around doing nothing. I looked online for prices, the cheapest I've found was $421, and Four Wheel Parts wants over $500, (on some serious crack ). I've seen used ones on Ebay go for $700-800 for 85-90%. Asking $750, can meet halfway depending where, or can ship them. I have some pics in my link below, go to the album marked tires. __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS

04-10-2005, 06:52 PM	#2
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	You sure would have these for sale when its about 3-4 months before i would need them and just before i start to make any money (summer) oh well coming from new york the shipping would probably kill me RYan __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

04-10-2005, 09:50 PM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	I`m in the same boat w/ryanroo.I want bigger tires to mount on the 9.75x16.5 OEM-types after I put the D60/14bolt and lift under the Highlander.16.5 choices are getting limited. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-13-2005, 07:15 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Lookin`for anything we could trade???I got stuff. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-14-2005, 07:14 PM	#6
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,469	Special K, what do you have?? I need fenders and inners, patch panels, etc for my 62 suburban. I might be looking for a set of 35s for 16" rims. Getting the pieces together to do a front axle swap in my 97, and might look funny with 33s on it. Right now though I could use the money (who couldn't) I found a carb for my car that is a screaming deal, and would make my car scream as well. It also needs a new radiator and front tires. I don't check this board as much as I used to, so if anyone wants to call, feel free. 607-237-0067. __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS

04-11-2005, 10:16 PM	#4
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,628	Too bad they are not for a 17'' rim, I'd grab those in a hearbeat

04-17-2005, 07:29 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Hmmm,I do have a set of 35"Pro-Comp X-terrains on 10x16 white spokes waiting to go on the truck that I would use your tires on.Brand new,never mounted,just waitin`on a lift.Like most people,you probably don`t care for the wagon wheels.They wore out on me years ago.I thought they`d look good on my blue`n`white`72. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-17-2005, 05:32 PM	#8
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,469	I have set on my 89, but I don't care about looks on that. I have a set of 15x8s painted aluminum on my 97 with the factory centers on it, doens't look too bad. Right now I just want to sell them, I could really use the money. If I don't sell them soon, I will take them to Bloomsburg along with a Dana 60 that I have, and maybe some SAS brackets that I had made up. __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS

04-17-2005, 05:47 PM	#9
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	How far are you from central VT? Are they still mounted?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.