`95 K2500HD Reg Cab Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 04-18-2005, 10:18 AM

Wrecked my truck and have some parts to sell.I`ve never sold on here before,so bare with me on shipping info.I need to know how to go about pricing that.I have a grey cloth bench seat($100),front bumper brackets*($25),driveshaft($25),fuel tank/diesel($25),manual tilt($75),complete dash/inst.cluster(what do you need?),diesel bumper/plain chrome slight tweek on corner*($30),engine cooler,a/c condensor*($25@),slightly tweeked core-support/single light*($50)L/F rotor to cv($50),p/s box($25).All parts marked w/* are New GM less than 9mos.old.Also have a W/T grille($25),Cheyenne grille($25), a "Ram-Air"non-funtional hood from Good Hood(Keystone)w/minor surface stress-cracking,very repairable($250),and same hood needing more glass work:minor surface stress-cracks/Needs reinforcing underneath($100).These are $800+ hoods.All prices +shipping.Please respond here.Thanks

99-2door · 04-18-2005, 11:36 AM

Are you calling the chrome grille, the Cheyenne grille? Got any pics?
Thanks

Fordeater · 04-18-2005, 01:29 PM

you got pics of that manual tilt column??? Put me first in line

454_72_4X4 · 04-18-2005, 04:00 PM

Are you parting out the whole truck or just selling the parts listed? Just wondering cause I need the trim pieces that go around the inside door handles, (Grey), and a pair of door lock cylinders with keys.
I'll be gone all week but should be home this weekend.
Thanks

Fordeater · 04-18-2005, 08:16 PM

does the column come with the steering wheel?

Larry b · 04-18-2005, 08:19 PM

What color interior? I'm looking for a gray piece of trim that goes from the dash up the window and above the drivers door.
Thanks, Larry

99-2door · 04-18-2005, 08:19 PM

Oh OK , I need a composite headlight grille.
Are you selling the interior? If so what color. I need gray seatbelts for a regular cab. Thanks

**special-K** · 04-18-2005, 09:37 PM

Fordeater:yeah,you can have the wheel.Column is still in truck.Larry b:I`ll have to check condition.I do have a full-pillar 3 guage pod($25)I never installed.Color-matched vinyl dye spray can($10).99-2door:It`s a grey interior.I have the belts($25)

Fordeater · 04-18-2005, 11:29 PM

sent you a pm

99-2door · 04-18-2005, 11:46 PM

Yeah, I want those belts. That's the full set? What size guages does that pod accept?

**special-K** · 04-19-2005, 07:22 AM

I`ll have to measure,but I believe it`s 2 1/8?The small size.Hey everybody,please be patient with me.What I want to do is get responses,then do all the shipping at the same time.I`m not into parts vending at this time.Just want to help you guys out,while getting rid of anything useable before scrapping.Bare with me,thanks.

**71blksuper4x4** · 04-19-2005, 10:27 AM

I will take the gauge pod for $25. Need it for the monster truck Hit me up for shipping.

Trevor Keeffe
1012 Fremont Apt. #5
Manhattan KS, 66502

**71blksuper4x4** · 04-20-2005, 07:23 PM

Sorry, pass on the gauge post. Dad already ordered one. TTT for ya.

Larry b · 04-20-2005, 08:40 PM

Quote:

Originally Posted by special-K

Fordeater:yeah,you can have the wheel.Column is still in truck.Larry b:I`ll have to check condition.I do have a full-pillar 3 guage pod($25)I never installed.Color-matched vinyl dye spray can($10).99-2door:It`s a grey interior.I have the belts($25)

When you get a chance let me know about the stock piece. The gauge pods sound nice but I have no need for them.
Thanks, Larry

454_72_4X4 · 04-21-2005, 03:07 PM

Quote:

Originally Posted by special-K

454 72 4x4:I do have both of those items.You have dibbs.

Cool! How much shipped to zip 63445?

tbirdman88 · 04-21-2005, 05:42 PM

how much for the whole dash,instrument cluster,a/c heater box under dash.
(every thing on the inside firewall), im wanting to put the dash in a 87 crewcab. maybe steering column too.

thanks
donnie-tbirdman88

99-2door · 04-25-2005, 04:34 PM

Any word on when you can ship this stuff?

**special-K** · 04-25-2005, 11:58 PM

I couldn`t make it out to where the truck is over the weekend,sorry.LarryB,I doubt the A-pillar trim will be undamaged.We rolled the truck over to get the drivetrain out and the top buckled.I`ll still check.

patgizz · 04-26-2005, 01:59 PM

is the bed bad?

BUDDY · 04-29-2005, 03:37 PM

what about the rear springs & hangers? maybe axle too?

Thanks,

Buddy

RWJJR · 04-29-2005, 07:02 PM

is one or both of the mirrors good??

**special-K** · 04-30-2005, 08:05 AM

Still haven`t gotten out there,I hope over the weekend.Some answers:1)No bed,was utility/keeping.2)I cut the spring hangers,need the rear,springs available but heavy to ship to Buffalo.3)on the complete dash etc.,you do the work,you can have it!4)It had towing(ss)type mirrors,saving good parts for other truck.I do have a pair of the`95 mirrors that most have in front window corner.One`s crackedglass).Drivers,I think.Sorry to all those waiting.I wouldn`t offer something I didn`t have ready to ship for this reason.The parts I originally listed are loose and ready.The rest is "special order",if you know what I mean.Thanks

Fordeater · 07-01-2005, 06:55 PM

did you get rid of that steering column yet?

**special-K** · 07-02-2005, 08:02 AM

I apologize for how this has gone.I wasn`t prepared for the time needed to do alot of dismantling/shipping.I will pull the column soon for you,Fordeater.If any others are still interested,let me know.It just got away from me.The parts listed,no response(except column).All responses were for parts not listed.I have not seen the truck since April.Summer took off runnin`.Sorry

ronsk10 · 07-29-2005, 11:50 PM

do you have a good AC compressor? Thanks

04-18-2005, 10:18 AM	#1
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	`95 K2500HD Reg Cab Parts Wrecked my truck and have some parts to sell.I`ve never sold on here before,so bare with me on shipping info.I need to know how to go about pricing that.I have a grey cloth bench seat($100),front bumper brackets($25),driveshaft($25),fuel tank/diesel($25),manual tilt($75),complete dash/inst.cluster(what do you need?),diesel bumper/plain chrome slight tweek on corner($30),engine cooler,a/c condensor($25@),slightly tweeked core-support/single light($50)L/F rotor to cv($50),p/s box($25).All parts marked w/* are New GM less than 9mos.old.Also have a W/T grille($25),Cheyenne grille($25), a "Ram-Air"non-funtional hood from Good Hood(Keystone)w/minor surface stress-cracking,very repairable($250),and same hood needing more glass work:minor surface stress-cracks/Needs reinforcing underneath($100).These are $800+ hoods.All prices +shipping.Please respond here.Thanks __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-18-2005, 11:36 AM	#2
99-2door Registered User Join Date: Oct 2003 Location: Broken Bow, OK Posts: 1,385	Are you calling the chrome grille, the Cheyenne grille? Got any pics? Thanks __________________ 95 K3500 SRW 5.7L Vortec 4L80e 4.10 G80 2001 GMC C3 6.0 AWD, Volant, 3/5 drop TBSS intake, HP tuners, pullies, 05 efans, 05 front brakes, etc. 2003 Tahoe Z71 Silverado front clip

04-18-2005, 04:00 PM	#4
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Are you parting out the whole truck or just selling the parts listed? Just wondering cause I need the trim pieces that go around the inside door handles, (Grey), and a pair of door lock cylinders with keys. I'll be gone all week but should be home this weekend. Thanks __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

04-18-2005, 08:19 PM	#7
99-2door Registered User Join Date: Oct 2003 Location: Broken Bow, OK Posts: 1,385	Oh OK , I need a composite headlight grille. Are you selling the interior? If so what color. I need gray seatbelts for a regular cab. Thanks __________________ 95 K3500 SRW 5.7L Vortec 4L80e 4.10 G80 2001 GMC C3 6.0 AWD, Volant, 3/5 drop TBSS intake, HP tuners, pullies, 05 efans, 05 front brakes, etc. 2003 Tahoe Z71 Silverado front clip

04-18-2005, 09:37 PM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Fordeater:yeah,you can have the wheel.Column is still in truck.Larry b:I`ll have to check condition.I do have a full-pillar 3 guage pod($25)I never installed.Color-matched vinyl dye spray can($10).99-2door:It`s a grey interior.I have the belts($25) __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-18-2005, 01:29 PM	#3
Fordeater Junior Member Join Date: Dec 2004 Location: San Antonio, Tx Posts: 57	you got pics of that manual tilt column??? Put me first in line

04-18-2005, 08:16 PM	#5
Fordeater Junior Member Join Date: Dec 2004 Location: San Antonio, Tx Posts: 57	does the column come with the steering wheel?

04-18-2005, 08:19 PM	#6
Larry b Registered User Join Date: Mar 2005 Location: CT. Posts: 26	What color interior? I'm looking for a gray piece of trim that goes from the dash up the window and above the drivers door. Thanks, Larry

04-18-2005, 11:29 PM	#9
Fordeater Junior Member Join Date: Dec 2004 Location: San Antonio, Tx Posts: 57	sent you a pm

04-18-2005, 11:46 PM	#10
99-2door Registered User Join Date: Oct 2003 Location: Broken Bow, OK Posts: 1,385	Yeah, I want those belts. That's the full set? What size guages does that pod accept? __________________ 95 K3500 SRW 5.7L Vortec 4L80e 4.10 G80 2001 GMC C3 6.0 AWD, Volant, 3/5 drop TBSS intake, HP tuners, pullies, 05 efans, 05 front brakes, etc. 2003 Tahoe Z71 Silverado front clip

04-19-2005, 07:22 AM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	I`ll have to measure,but I believe it`s 2 1/8?The small size.Hey everybody,please be patient with me.What I want to do is get responses,then do all the shipping at the same time.I`m not into parts vending at this time.Just want to help you guys out,while getting rid of anything useable before scrapping.Bare with me,thanks. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-19-2005, 10:27 AM	#12
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	I will take the gauge pod for $25. Need it for the monster truck Hit me up for shipping. Trevor Keeffe 1012 Fremont Apt. #5 Manhattan KS, 66502 __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

04-20-2005, 07:23 PM	#13
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Sorry, pass on the gauge post. Dad already ordered one. TTT for ya. __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

04-21-2005, 05:42 PM	#16
tbirdman88 87 short crewcab Join Date: Jan 2004 Location: duncan okla Posts: 82	95 parts how much for the whole dash,instrument cluster,a/c heater box under dash. (every thing on the inside firewall), im wanting to put the dash in a 87 crewcab. maybe steering column too. thanks donnie-tbirdman88

04-25-2005, 04:34 PM	#17
99-2door Registered User Join Date: Oct 2003 Location: Broken Bow, OK Posts: 1,385	Any word on when you can ship this stuff? __________________ 95 K3500 SRW 5.7L Vortec 4L80e 4.10 G80 2001 GMC C3 6.0 AWD, Volant, 3/5 drop TBSS intake, HP tuners, pullies, 05 efans, 05 front brakes, etc. 2003 Tahoe Z71 Silverado front clip



Register or Log In To remove these advertisements.

04-25-2005, 11:58 PM	#18
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	I couldn`t make it out to where the truck is over the weekend,sorry.LarryB,I doubt the A-pillar trim will be undamaged.We rolled the truck over to get the drivetrain out and the top buckled.I`ll still check. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-26-2005, 01:59 PM	#19
patgizz Registered User Join Date: Oct 2002 Location: Cleveland, OH Posts: 429	is the bed bad?

04-29-2005, 03:37 PM	#20
BUDDY Global warming is a myth Join Date: Apr 2003 Location: Henderson, NV Posts: 208	what about the rear springs & hangers? maybe axle too? Thanks, Buddy

04-29-2005, 07:02 PM	#21
RWJJR Registered User Join Date: Feb 2005 Location: EAST TENNESSEE Posts: 233	is one or both of the mirrors good??

04-30-2005, 08:05 AM	#22
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Still haven`t gotten out there,I hope over the weekend.Some answers:1)No bed,was utility/keeping.2)I cut the spring hangers,need the rear,springs available but heavy to ship to Buffalo.3)on the complete dash etc.,you do the work,you can have it!4)It had towing(ss)type mirrors,saving good parts for other truck.I do have a pair of the`95 mirrors that most have in front window corner.One`s crackedglass).Drivers,I think.Sorry to all those waiting.I wouldn`t offer something I didn`t have ready to ship for this reason.The parts I originally listed are loose and ready.The rest is "special order",if you know what I mean.Thanks __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 04-30-2005 at 08:10 AM. Reason: Missed mirror question

07-01-2005, 06:55 PM	#23
Fordeater Junior Member Join Date: Dec 2004 Location: San Antonio, Tx Posts: 57	did you get rid of that steering column yet?

07-02-2005, 08:02 AM	#24
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	I apologize for how this has gone.I wasn`t prepared for the time needed to do alot of dismantling/shipping.I will pull the column soon for you,Fordeater.If any others are still interested,let me know.It just got away from me.The parts listed,no response(except column).All responses were for parts not listed.I have not seen the truck since April.Summer took off runnin`.Sorry __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-29-2005, 11:50 PM	#25
ronsk10 Registered User Join Date: Jun 2003 Location: Scotland Neck NC Posts: 316	do you have a good AC compressor? Thanks

Register or Log In To remove these advertisements.