67 - 68 chevy truck parts for trade? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MISTERSHOTGUN · 04-21-2005, 06:34 PM

As you seen in an earlier message of mine. I am looking for the sheetmetal part that is riveted in the grill of the 67 - 68 chevy trucks. The only part I am interested in is the top sheetmetal part that is taken off by drilling the rivets out from under the top chrome loop molding. (or the whole front grill assembly) I will be willing to trade some parts if your interested in a even swap paying only shipping differences. here is what I got.. I will trade all of these or some of them for this part.
1 original intake manifold for a 305 chevy small block. works for 350 small blocks.
1 rochester 2bbl carb that works fine but is ugly.. i used it until i got my edelbrock upgrade... needs cleaning.
A set of disc break spindles.
1 lot of airconditioner parts including brackets etc. I have to see what all I have to talk specifics.
1 set of rear coil springs original.
some other misc stuff.
please let me know if interested
If you have the part I need for a trade, I can take pictures of the parts your interested in.
Thanks
Gary

jostrans68 · 04-21-2005, 07:42 PM

LOCATION

MISTERSHOTGUN · 04-21-2005, 08:16 PM

Clearwater Florida

MISTERSHOTGUN · 04-21-2005, 08:18 PM

crap.. My brother told me that the carb was a 1bbl.... I'll check to see..

67mbsc · 04-21-2005, 09:05 PM

I may have one, I just threw a grill in the junk pile today, The grille's bent at the bottom. Please PM me to remind me, I'll look tomorrow.

MISTERSHOTGUN · 04-23-2005, 08:42 PM

I can't believe that I have all these parts and nobody wants to trade.....?

RicksTrucks · 04-26-2005, 10:15 PM

I have one I took off one of my trucks, it is bent, but maybe not where you want. PM me your email address and I will send you a pic tomorrow and you can tell me if that one will work.

MISTERSHOTGUN · 04-27-2005, 09:12 AM

I sent a pm. Thanks
Gary Day
mistershotgun@yahoo.com

MOTHERTRUCKERS · 04-27-2005, 09:47 AM

We have 67-8 grills and grill parts in stock including inserts, new and used trim and used center supports.

MISTERSHOTGUN · 04-27-2005, 02:12 PM

Do you have the exact parts I,m looking for? not the grill or the loops... I'm going to check out the site now.

MISTERSHOTGUN · 04-27-2005, 02:17 PM

Nope.. not seeing it on the mother truckers site... I'll take a picture of what I am talking about this weekend...

MOTHERTRUCKERS · 04-28-2005, 08:12 AM

I don't list our used parts. I have the used upper and lower grill inserts, used and new grill trim,used park light assemblies, center supports, grills and splash pans along with some aluminum and steel headlight bezels. Also have good 71-2 inner and outer grills and some good 70 inner grills.

MISTERSHOTGUN · 04-28-2005, 09:03 AM

well.. How much are the inserts? Is there pictures or links...? Do you take paypal?

MOTHERTRUCKERS · 04-28-2005, 10:08 AM

No paypal, email me for pictures motrucker@prodigy.net or drive down to Bradenton.

MOTHERTRUCKERS · 04-29-2005, 06:24 AM

I'll email pictures this weekend.

04-21-2005, 06:34 PM	#1
MISTERSHOTGUN Registered User Join Date: Apr 2005 Posts: 95	67 - 68 chevy truck parts for trade? As you seen in an earlier message of mine. I am looking for the sheetmetal part that is riveted in the grill of the 67 - 68 chevy trucks. The only part I am interested in is the top sheetmetal part that is taken off by drilling the rivets out from under the top chrome loop molding. (or the whole front grill assembly) I will be willing to trade some parts if your interested in a even swap paying only shipping differences. here is what I got.. I will trade all of these or some of them for this part. 1 original intake manifold for a 305 chevy small block. works for 350 small blocks. 1 rochester 2bbl carb that works fine but is ugly.. i used it until i got my edelbrock upgrade... needs cleaning. A set of disc break spindles. 1 lot of airconditioner parts including brackets etc. I have to see what all I have to talk specifics. 1 set of rear coil springs original. some other misc stuff. please let me know if interested If you have the part I need for a trade, I can take pictures of the parts your interested in. Thanks Gary

04-21-2005, 07:42 PM	#2
jostrans68 Jostrans68 Join Date: Mar 2001 Location: Bloomington indiana Posts: 1,182	LOCATION __________________ [CGTW Member former 67-72 now with a 96 silverado

04-21-2005, 08:16 PM	#3
MISTERSHOTGUN Registered User Join Date: Apr 2005 Posts: 95	Clearwater Florida Clearwater Florida

04-21-2005, 09:05 PM	#5
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	grille top I may have one, I just threw a grill in the junk pile today, The grille's bent at the bottom. Please PM me to remind me, I'll look tomorrow.

04-26-2005, 10:15 PM	#7
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	I have one I took off one of my trucks, it is bent, but maybe not where you want. PM me your email address and I will send you a pic tomorrow and you can tell me if that one will work. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

04-21-2005, 08:18 PM	#4
MISTERSHOTGUN Registered User Join Date: Apr 2005 Posts: 95	crap.. My brother told me that the carb was a 1bbl.... I'll check to see..

04-23-2005, 08:42 PM	#6
MISTERSHOTGUN Registered User Join Date: Apr 2005 Posts: 95	I can't believe that I have all these parts and nobody wants to trade.....?

04-27-2005, 09:12 AM	#8
MISTERSHOTGUN Registered User Join Date: Apr 2005 Posts: 95	I sent a pm. Thanks Gary Day mistershotgun@yahoo.com

04-27-2005, 09:47 AM	#9
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	We have 67-8 grills and grill parts in stock including inserts, new and used trim and used center supports. __________________ Rest in Peace Ed. Thanks for all the good times.

04-27-2005, 02:12 PM	#10
MISTERSHOTGUN Registered User Join Date: Apr 2005 Posts: 95	Do you have the exact parts I,m looking for? not the grill or the loops... I'm going to check out the site now.

04-27-2005, 02:17 PM	#11
MISTERSHOTGUN Registered User Join Date: Apr 2005 Posts: 95	Nope.. not seeing it on the mother truckers site... I'll take a picture of what I am talking about this weekend...

04-28-2005, 08:12 AM	#12
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	I don't list our used parts. I have the used upper and lower grill inserts, used and new grill trim,used park light assemblies, center supports, grills and splash pans along with some aluminum and steel headlight bezels. Also have good 71-2 inner and outer grills and some good 70 inner grills. __________________ Rest in Peace Ed. Thanks for all the good times.

04-28-2005, 09:03 AM	#13
MISTERSHOTGUN Registered User Join Date: Apr 2005 Posts: 95	well.. How much are the inserts? Is there pictures or links...? Do you take paypal?

04-28-2005, 10:08 AM	#14
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	No paypal, email me for pictures motrucker@prodigy.net or drive down to Bradenton. __________________ Rest in Peace Ed. Thanks for all the good times.

04-29-2005, 06:24 AM	#15
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	I'll email pictures this weekend. __________________ Rest in Peace Ed. Thanks for all the good times.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.