'82 K20 parting out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

75-K5 · 04-24-2005, 01:09 AM

Well I really hate to do this but with the payment for the new truck and too much to do on the K5, etc. I have to get rid of this truck. I'm parting it out because I don't have a title for it. The body is in very good condition which is the reason I bought it in the first place. It only has minor surface rust with a few small bubbles here and there. The frame is pretty good as well with the only problem spot (driver's spring hanger) shown in the pics. I won't be selling the axles. If someone is interested in the whole truck I'd let it go for $700. I've got a set of 1/2 ton axles to put under it that are in OK shape and I also have the means to get a title for it. I won't be able to start pulling parts off it until around the 2nd week of May but I thought I'd post it now to see if anyone was interested. Located in Anderson, IN about 30 miles northeast of Indy. Thanks.

**hilljob26** · 04-24-2005, 09:36 AM

do u have any drive lines for it

Brad_Olson · 04-24-2005, 12:35 PM

Dang...I wish you lived closer to Wisconsin. That truck could go a long way toward improving my '86!

Brad

'72 Chevy Suburban · 04-24-2005, 02:30 PM

Brad,

I have a friend in Muncie that could probably store it for you....

John

benoit454 · 04-24-2005, 04:25 PM

I was gonna ask about the spring hanger but I see the passenger side is rusted out pretty bad. How is the drivers side? Mines rusted out on my drivers side like yours is in the picture.

75-K5 · 04-25-2005, 01:26 AM

Quote:

Originally Posted by hilljob26

do u have any drive lines for it

Yes, I have front and rear driveshafts.

Quote:

Originally Posted by benoit454

I was gonna ask about the spring hanger but I see the passenger side is rusted out pretty bad. How is the drivers side? Mines rusted out on my drivers side like yours is in the picture.

I'm not at home where the truck is right now to see the driver's side but I think it's in better shape. I have an extra set of spring hangers I might want to be selling though so I'll let you know when I get home and can look through my other parts.

tomSmith · 04-25-2005, 07:13 AM

how much for the bed, passenger fender ?

*1FaastC10* · 04-25-2005, 05:45 PM

damn. if only i had room for it. would make a perfect DD/part time tow rig what trans and case did it have in it? looks like a 465 (and probably a 208)

75-K5 · 04-26-2005, 12:41 AM

Quote:

Originally Posted by 1FaastC10

damn. if only i had room for it. would make a perfect DD/part time tow rig what trans and case did it have in it? looks like a 465 (and probably a 208)

Yep, it had a 465/208. I REALLY want to keep it and make it a DD/tow rig but I gotta narrow my focus.

Quote:

Originally Posted by tomSmith

how much for the bed, passenger fender ?

Let me get with you later on an exact price for it. Like I mentioned above, I won't be able to pull parts off it until a couple weeks from now, and I'm also not at home where the truck is to get a better look at things to know what I'd ask for the bed. I'll take more pics of it to give you a better idea of what it looks like when I get up there.

beaterC10 · 04-26-2005, 08:36 AM

I am interested in the transmission hump, door panels, and the bench seat tracks. I figure I should buy some of your stuff since you bought some of mine.

Gray Ghost · 04-26-2005, 09:14 AM

How about the front disc rotors shipped to Dallas, 75227 (If they are in good shape that is)?

75-K5 · 04-26-2005, 03:55 PM

Quote:

Originally Posted by beaterC10

I am interested in the transmission hump, door panels, and the bench seat tracks. I figure I should buy some of your stuff since you bought some of mine.

Haha, good idea. When I get home next weekend I'll take pics of that stuff and send them to you and if you like them I could drop by sometime and drop them off. The transmission hump is for an sm465 just to be sure you knew that.

Quote:

Originally Posted by Buffalo Elk

How about the front disc rotors shipped to Dallas, 75227 (If they are in good shape that is)?

Sorry, I'm not selling any parts off the axles, I'm keeping them for my K5.

beaterC10 · 04-26-2005, 05:23 PM

I'm not real picky about what the hump is for as long as it will fit my mid 80's 2wd cab or come reasonably close. I need it to install a Hurst street super shifter and 4 speed.

The bench seat tracks I need are for a bench seat with the adjustment lever in the front instead of the side. I think it's the difference between 73-80 and 81-87.

Do you need any parts for your K5? I have a tailgate band and gas tank left over from an 86 I junked last fall.

75-K5 · 05-06-2005, 09:34 PM

ttt, I'm home this weekend and can get more pics of parts and possibly get some boxed up.

75-K5 · 06-17-2005, 03:22 AM

Still have several good parts left. Cab, brake booster, dual tank switch, frame, etc.

04-24-2005, 01:09 AM	#1
75-K5 Bucket of Bolts Join Date: Dec 2003 Location: Anderson, Indiana Posts: 455	'82 K20 parting out Well I really hate to do this but with the payment for the new truck and too much to do on the K5, etc. I have to get rid of this truck. I'm parting it out because I don't have a title for it. The body is in very good condition which is the reason I bought it in the first place. It only has minor surface rust with a few small bubbles here and there. The frame is pretty good as well with the only problem spot (driver's spring hanger) shown in the pics. I won't be selling the axles. If someone is interested in the whole truck I'd let it go for $700. I've got a set of 1/2 ton axles to put under it that are in OK shape and I also have the means to get a title for it. I won't be able to start pulling parts off it until around the 2nd week of May but I thought I'd post it now to see if anyone was interested. Located in Anderson, IN about 30 miles northeast of Indy. Thanks. __________________ This is the project that never ends, yes it goes on and on my friend....

04-24-2005, 09:36 AM	#2
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	do u have any drive lines for it __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

04-24-2005, 02:30 PM	#4
'72 Chevy Suburban Chevy's Rock! Join Date: Apr 2004 Location: Lebanon, OH Posts: 448	Brad, I have a friend in Muncie that could probably store it for you.... John __________________ John '59 NAPCO Pickup '70 K10 Pickup 350 '72 C20 Suburban 350 (MIA) '57 Chieftain 455 '68 Firebird Convertible - 400 '68 Catalina Convertible - 400 '85 Vette

04-24-2005, 04:25 PM	#5
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	I was gonna ask about the spring hanger but I see the passenger side is rusted out pretty bad. How is the drivers side? Mines rusted out on my drivers side like yours is in the picture. __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

04-26-2005, 09:14 AM	#11
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	How about the front disc rotors shipped to Dallas, 75227 (If they are in good shape that is)? __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

04-24-2005, 12:35 PM	#3
Brad_Olson Active Member Join Date: Mar 2005 Location: Stoughton, WI Posts: 187	Dang...I wish you lived closer to Wisconsin. That truck could go a long way toward improving my '86! Brad

04-25-2005, 07:13 AM	#7
tomSmith Registered User Join Date: Feb 2004 Location: North Bend , Ohio Posts: 54	how much for the bed, passenger fender ?

04-25-2005, 05:45 PM	#8
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	damn. if only i had room for it. would make a perfect DD/part time tow rig what trans and case did it have in it? looks like a 465 (and probably a 208)

04-26-2005, 08:36 AM	#10
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	I am interested in the transmission hump, door panels, and the bench seat tracks. I figure I should buy some of your stuff since you bought some of mine.

04-26-2005, 05:23 PM	#13
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	I'm not real picky about what the hump is for as long as it will fit my mid 80's 2wd cab or come reasonably close. I need it to install a Hurst street super shifter and 4 speed. The bench seat tracks I need are for a bench seat with the adjustment lever in the front instead of the side. I think it's the difference between 73-80 and 81-87. Do you need any parts for your K5? I have a tailgate band and gas tank left over from an 86 I junked last fall. Last edited by beaterC10; 04-26-2005 at 05:26 PM.

05-06-2005, 09:34 PM	#14
75-K5 Bucket of Bolts Join Date: Dec 2003 Location: Anderson, Indiana Posts: 455	ttt, I'm home this weekend and can get more pics of parts and possibly get some boxed up. __________________ This is the project that never ends, yes it goes on and on my friend....

06-17-2005, 03:22 AM	#15
75-K5 Bucket of Bolts Join Date: Dec 2003 Location: Anderson, Indiana Posts: 455	Still have several good parts left. Cab, brake booster, dual tank switch, frame, etc. __________________ This is the project that never ends, yes it goes on and on my friend....



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.