Parting out 71 GMC 2500 Sierra Grande Camper Custom, WI - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tiresmokin · 04-27-2005, 05:10 PM

Let me 1st say that this seems like a great website. Thanks!

I am parting out the whole truck. Some body parts are rusted and some survived. The truck has 85K miles on it. So far:
The engine and trans are sold.
The power steering pump and gearbox have a pending sale.

The guy I bought it from replaced the radiator with a new 4 core, replaced front rotors and then let the truck sit for 2 years. Those items have 1 years use on them. Have 4 8-bolt aluminum wheels (turbine style?). Extra steel wheels. Has a topper.

Has some good parts. If you want something, post it and I will take a pic and give a description.
Thanks,
Scott

70GMCer · 04-27-2005, 05:13 PM

How's the radiator core support? I'm needing a good straight one. Where are you located?

Jason915 · 04-27-2005, 05:15 PM

I am looking for some good (driver quility) outer front grill eyebrow molding trim pieces. Do you have some on this truck your parting out? If so can you post some picts, $+shipping to 80916?

Thanks

Tiresmokin · 04-27-2005, 05:16 PM

The core support I took out when I pulled the motor. It is in great shape from what I seen. I will take a better look and a pic of it.
I am in Oshkosh Wisconsin.

*Tanker350* · 04-27-2005, 05:24 PM

gmc stamped tailgate? Any pics, I'm interested. thanks

Tiresmokin · 04-27-2005, 05:44 PM

Core support looks good and straight. Very little surface rust on bottom,. Certainly no rot thru. Sandblast and paint should be all it needs:
[IMG]

[/IMG] [IMG]

[/IMG]

Tiresmokin · 04-27-2005, 05:57 PM

Quote:

Originally Posted by Jason915

I am looking for some good (driver quility) outer front grill eyebrow molding trim pieces. Do you have some on this truck your parting out? If so can you post some picts, $+shipping to 80916?

Thanks

If these are the parts you want......they are pitted, left side has a small ding in it. $17 shipped.[IMG]

[/IMG] [IMG]

[/IMG]

Tiresmokin · 04-27-2005, 06:09 PM

Quote:

Originally Posted by Tanker350

gmc stamped tailgate? Any pics, I'm interested. thanks

Has trim piece, but here's a pic anyway. Not rotted thru, but some rust and a few dings, latch attached in middle.[IMG]

[/IMG]

70GMCer · 04-27-2005, 06:19 PM

Core support looks good. How much + shipping to 21085, Maryland?

Tiresmokin · 04-27-2005, 07:23 PM

Quote:

Originally Posted by 70GMCer

Core support looks good. How much + shipping to 21085, Maryland?

Wow! The shipping can be expensive. 1st quote was $114. if I package it real tight only changing the dimension a few inches it went to $42. How's $150 shipped? If I can get it to measure small enough.

71swb4x4 · 04-27-2005, 07:27 PM

I would be interested in the tilt if it has it.

Tiresmokin · 04-27-2005, 07:42 PM

Quote:

Originally Posted by 71swb4x4

I would be interested in the tilt if it has it.

No tilt.

I also have new rocker panels, cab corners and supports- never installed.

71swb4x4 · 04-27-2005, 07:48 PM

Does it have a seat?
How about hub caps. Are they all like the one that is pictured? I think that's a later model, are any the originals?

chief bobber · 04-27-2005, 07:48 PM

How much for the replacement metal shipped to 03470? Also are these the slip over rockers or the full size?
Thanks, KC

Tiresmokin · 04-27-2005, 07:54 PM

Shipping should be about $15. $70 for parts? I don't know about slip over Panels? I can get the part numbers or take pics if you want. They are in a box full of those foam peanuts now

Tiresmokin · 04-27-2005, 07:57 PM

Quote:

Originally Posted by 71swb4x4

Does it have a seat?
How about hub caps. Are they all like the one that is pictured? I think that's a later model, are any the originals?

Has a bench seat with a cover on it. Don't know the condition. Interior is white. Have hubcaps like in the pic. Rears were cut for the axle hub to stick thru. Have no idea what they were off. No other hubcaps.

71swb4x4 · 04-27-2005, 08:03 PM

Thanks for the quick responses.
Where in WI are you?

**68350** · 04-27-2005, 08:13 PM

Hi, what kind of shape is the dash in? Does it have a tach? What about glovebox door? How about the headliner and door panels? What other options does it have? Prices on these plus shipping to Williston, ND 58801 also please.

**too much stuff** · 04-27-2005, 09:17 PM

How much for woodgrain gmc tailgate band? Also any lower chrome in nice shape? side marker lights? Glovebox door? Shipping to 55744. Thanks

Tiresmokin · 04-27-2005, 09:59 PM

Quote:

Originally Posted by 71swb4x4

Thanks for the quick responses.
Where in WI are you?

Oshkosh. About 80 miles north of Milwaukee.

Tiresmokin · 04-27-2005, 11:09 PM

Quote:

Originally Posted by too much stuff

How much for woodgrain gmc tailgate band? Also any lower chrome in nice shape? side marker lights? Glovebox door? Shipping to 55744. Thanks

Tailgate band has about 6 dings in it. GMC emblem has heavier pits. If ya want it $25 shipped
Both front sidemarkers are good. Right rear sidemarker is good. Left has a chip and 4 rub marks on it. Buy 3 get 1 free. $45 shipped.
Glove box door is good, but I will save that cause of the vin# in case someone wants other vin related items.
The only lower trim thats good is on the left fender behind the wheel. I would say it is usable with some of the woodgrain fraying at the very edges. Maybe 1/32nd of an inch. $15 shipped

Tiresmokin · 04-27-2005, 11:22 PM

Quote:

Originally Posted by 68350

Hi, what kind of shape is the dash in? Does it have a tach? What about glovebox door? How about the headliner and door panels? What other options does it have? Prices on these plus shipping to Williston, ND 58801 also please.

Dash pad is shot. Instrument cluster is good but would need some restoration to be great. Gauges work. Would have to check on speedo cause it wasn't working when I drove the truck home. The speedo transducer thing on the trans was broke, so that may have been the cause. No tach. Wish it did!

All interior parts are DIRTY but should clean up good. I will even clean before shipping.
Headliner is great but the trim around it is shot. Shipping alot: $22. $55 shipped.
Left door panel good,no tears. Chrome trim light rust specs. $55 shipped.
Right door panel good with 1 tear on bottom by screw size of a quarter. $40 shipped.
Both armrests good. $50 shipped both.

Options: Pwr disc brakes, sliding rear window???

*Tanker350* · 04-28-2005, 12:01 AM

i'll pass on the tailgate, thank-you for responding

Tiresmokin · 04-28-2005, 12:11 AM

Here's a link to the pics I have so far. This way for those using dial up, they don't have to spend a few hours for this thread to load

Pics

*Tanker350* · 04-28-2005, 12:17 AM

Tool box door, hinges, mounting brackets, lock? I need one bad.. Pics?

04-27-2005, 05:10 PM	#1
Tiresmokin Registered User Join Date: Apr 2005 Posts: 72	Parting out 71 GMC 2500 Sierra Grande Camper Custom, WI Let me 1st say that this seems like a great website. Thanks! I am parting out the whole truck. Some body parts are rusted and some survived. The truck has 85K miles on it. So far: The engine and trans are sold. The power steering pump and gearbox have a pending sale. The guy I bought it from replaced the radiator with a new 4 core, replaced front rotors and then let the truck sit for 2 years. Those items have 1 years use on them. Have 4 8-bolt aluminum wheels (turbine style?). Extra steel wheels. Has a topper. Has some good parts. If you want something, post it and I will take a pic and give a description. Thanks, Scott

04-27-2005, 05:13 PM	#2
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	How's the radiator core support? I'm needing a good straight one. Where are you located? __________________ 1997 GMC Sierra Ext 1965 Mustang

04-27-2005, 05:15 PM	#3
Jason915 Registered User Join Date: Jan 2005 Location: Colorado Springs Posts: 693	I am looking for some good (driver quility) outer front grill eyebrow molding trim pieces. Do you have some on this truck your parting out? If so can you post some picts, $+shipping to 80916? Thanks __________________ 1971 GMC K1500 SWB Fleetside, 4" skyjacker softride and, 14 Bolt FF, HD Dana 44 4.10's 1970 K5 TBI conversion lifted etc SOLD 1968 C20 camper truck SOLD “To ban guns because criminals use them is to tell the innocent and law-abiding that their rights and liberties depend not on their own conduct, but on the conduct of the guilty and the lawless.” Jeff Snyder

04-27-2005, 05:44 PM	#6
Tiresmokin Registered User Join Date: Apr 2005 Posts: 72	Core support looks good and straight. Very little surface rust on bottom,. Certainly no rot thru. Sandblast and paint should be all it needs: [IMG][/IMG] [IMG][/IMG] [IMG][/IMG]

04-27-2005, 06:19 PM	#9
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Core support looks good. How much + shipping to 21085, Maryland? __________________ 1997 GMC Sierra Ext 1965 Mustang

04-27-2005, 05:16 PM	#4
Tiresmokin Registered User Join Date: Apr 2005 Posts: 72	The core support I took out when I pulled the motor. It is in great shape from what I seen. I will take a better look and a pic of it. I am in Oshkosh Wisconsin.

04-27-2005, 05:24 PM	#5
Tanker350 Account Suspended Join Date: Dec 2003 Location: Palm Desert, Ca Posts: 410	gmc stamped tailgate? Any pics, I'm interested. thanks

04-27-2005, 07:27 PM	#11
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	I would be interested in the tilt if it has it. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

04-27-2005, 07:48 PM	#13
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Does it have a seat? How about hub caps. Are they all like the one that is pictured? I think that's a later model, are any the originals? __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

04-27-2005, 07:48 PM	#14
chief bobber Sanity is a state of mind Join Date: Apr 2005 Location: New Humpshire Posts: 93	How much for the replacement metal shipped to 03470? Also are these the slip over rockers or the full size? Thanks, KC __________________ 67 K-10 8ft step 250/465/timken 4 shaft/373 to 1 70 C-10 Panel Vortec V/5spd BW od /307 to 1 70 C-30 9ft stepside dump 350/465/ posi and a few too many other trucks, cars, jeeps, cruisiers, and M/Cs ...o~`o

04-27-2005, 07:54 PM	#15
Tiresmokin Registered User Join Date: Apr 2005 Posts: 72	Shipping should be about $15. $70 for parts? I don't know about slip over Panels? I can get the part numbers or take pics if you want. They are in a box full of those foam peanuts now

04-27-2005, 08:03 PM	#17
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Thanks for the quick responses. Where in WI are you? __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

04-27-2005, 08:13 PM	#18
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	... Hi, what kind of shape is the dash in? Does it have a tach? What about glovebox door? How about the headliner and door panels? What other options does it have? Prices on these plus shipping to Williston, ND 58801 also please.

04-27-2005, 09:17 PM	#19
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,759	How much for woodgrain gmc tailgate band? Also any lower chrome in nice shape? side marker lights? Glovebox door? Shipping to 55744. Thanks __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-28-2005, 12:01 AM	#23
Tanker350 Account Suspended Join Date: Dec 2003 Location: Palm Desert, Ca Posts: 410	i'll pass on the tailgate, thank-you for responding



Register or Log In To remove these advertisements.

04-28-2005, 12:11 AM	#24
Tiresmokin Registered User Join Date: Apr 2005 Posts: 72	Link to pics Here's a link to the pics I have so far. This way for those using dial up, they don't have to spend a few hours for this thread to load Pics

04-28-2005, 12:17 AM	#25
Tanker350 Account Suspended Join Date: Dec 2003 Location: Palm Desert, Ca Posts: 410	Tool box door, hinges, mounting brackets, lock? I need one bad.. Pics?

Register or Log In To remove these advertisements.