What did you get done? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**N2TRUX** · 05-01-2005, 09:59 AM

Yeah it's still early on Sunday, but this is my only chance to post today. I will be at the dowtown at the Goerge R. Brown convention center all day today for the final round of the Lonestar Regional volleyball tournament.

My daughters team had an awesome day yesterday and won every match they played. That put them in the gold bracket today. If they can just hang in there and finish 3rd or better they qualify to play at the Junior Olympic nationals in Salt Lake City.

About the only thing truck related I have done is wash and detail both our drivers. Boring job, but it has to be done.

What did you get done?

SanitysBane · 05-01-2005, 01:13 PM

I put gas in my truck...

*1FaastC10* · 05-01-2005, 02:27 PM

Friday night, i came home from work and started cleaning up my 95 Grand Am back together, put a few finishing touches on it before i set it out for sale. set it out about 7pm. i woke up yesterday morning to hear the doorbell. i look out, and there's a minivan sitting at the end of the driveway next to the Grand Am. so i throw on some clothes, grab the keys, and head for the door. they look the car over real well, and ask to take it for a test drive. we go for a short drive (since the car has no plates or insurance) and then get down to business talking about a price. they offer $700, from my $1500 asking price i thought that was a little low. managed to talk them up to $900, and i let it go for that. considering i had just under $400 in the car, and i'm tired of looking at it, i dont think i did too bad. and since it sat out there just over 12 hours, i dont have to hear *****ing about the dead spots in the grass.

went to my buddy's house and helped him and his cousin strip out the new derby truck. a '66 Ford F250. its a little rough around the edges, but overall a solid truck. he scored it no motor/no trans for $150. we'll put a small block Chevy and a TH350 in it and call it good.

after stripping the truck, decided to go to the races. found out that there has been a rule change, and street stocks now allow pickups, where only mini stocks did before. got some wheels turning....

and im just sitting here watching the race now. i might go outside in a little bit and push the 86 out of the garage and start cleaning up.

plumbcut · 05-01-2005, 03:05 PM

pulled the cover on my front dana 44 and found all the spiders and ring gear destroyed.. no big deal, 30 year old parts held up well.. So now I got a project to work on, ill have to pull the front axle in the next few days and put it on a stand and start rebuilding.. just not sure what to replace the open carrier with, just yet... Ill post pics later

pc

SCOTI · 05-01-2005, 03:06 PM

I cleaned the 74 after leaving work yesterday & stopped by the Dust-Off.

Today, I went back out to Dust-Off w/my old buddy that couldn't go yesterday. Less there today than there was yesterday.

Now it's furniture assembly time (a desk for the young one). I hope to get some time to work on my 74's bucket seat frame (I'm making a frame similar to the 67-8 'buddy' buckets).

**AspecialZ** · 05-01-2005, 05:11 PM

I painted the front end parts of the 76, came out real nice.

cliffsta · 05-01-2005, 07:43 PM

I helped my couisn move some more, hauled big loads saturday and sunday. partied saturday night. plannin' on cleanin' my interior up tonight or tomorrow.

ocbaud · 05-01-2005, 08:13 PM

i test drove an 01' mustang gt 5 speed.
its slower than my truck

oh, and i just finished installing Mac OSX 10.4 tiger
i like it so far

oh, and i liked the mustang a lot too

1974gmc · 05-01-2005, 08:57 PM

saturday-got a canopy for my truck so i can go camping
sunday-crack head offered to trade his pos 88 chevy 3/4t 4x4 for mine. guy must think im stupid or something. the motor was covered in oil, interior looked like sh*t, box was rusted. worth about half of mine.

Jonboy · 05-01-2005, 09:25 PM

I had some friends come up from Austin, and we went to the Pate Swap meet out at TMS Saturday morning. There were loads of overpriced junk out there. Not much interesting. I almost picked up a white 86 GMC SWB, but teh dude was stuck on $2500. A little rich for that truck. There was an 87 with a not so great repaint and partial color change that was $5K. Waaaaay to much. We went home empty handed. The bright spot was seeing a set of slotted mags in 17" sizes. I almost bought a set, but cooler heads prevailed. Here is a link:http://www.americanracing.com/wheels...lloy&section=V .

Prerunner1982 · 05-01-2005, 09:56 PM

worked... mostly....
truck related? hmmmm

Tues the passenger side exhaust fell off the truck.. the flat flange part of the collector actually seperated from the pipe.. wasnt rusted just cracked. Went ahead and had new collectors welded on both sides.. sounds soo much better now.. had been leaking for some time and i suppose i just got use to it..

towed it to a trans shop... yep.. it finally gave it up..going to stop by the shop in the morning and see how much its going to run. If its too rich for my blood i will have a buddy and his Jeep TJ (350 chevy, th400, 38" swampers) tow my truck home so i can tear it out myself..unfortunately i dont have a concrete driveway to lay on, and would rather not roll around in the dirt. At the moment i would rather have it done even if it cost alittle bit more.. but if worse comes to worse i will do it myself over a week or two time. Unfortunately that leaves 4 working adults with 2 cars... makes things difficult. hopefully tax return will come in soon.. was planning on using it on a front end rebuilt (tie rods, idler arm, pitman arm, ball joints, and control arm bushings). Oh well... we shall see what another week will bring..

gldevall · 05-01-2005, 10:26 PM

Cranked the truck and drove it around the block. 1st time its been ran in over a month now. Bought a new John Deere lawnmower....and mowed grass.

**old Rusty C10** · 05-01-2005, 11:27 PM

well this weekend was not a truck related weekend.. my buddy towed his mitsubishi eclipse turbo ( yuck i know a ricer) and we put the trans in it he has some kind of boost system hes rigging up but hey i have all kind of tools and it was easier to do that here. the deal is i help him he does the clutch in my kids acura so thats a fair deal lol i do have to get some stuff done on the truck maybe next week the carpet needs to get done the exhaust is loose and i gotta fix that

TRUCKGUY · 05-01-2005, 11:45 PM

saturday morning woke up at 5:30...my mom,brother,sister went to a bull ride....i stayed in till about 12...then pulled some trucks around with my uncle...went to my other uncles place...looked at some junk....think thats it...sunday....got up went and welded on my uncle semie trailer till around 12:30...cam back cranked my 67 IH 2wd let it run for awhile and moved it then pulled the engine out of my 67 IH 4wd.....worked on my uncles 52 chevy....by then it was geting dark so we put up the tools and went in...so that's all folk's.....

Russell · 05-02-2005, 12:30 AM

I cleaned the 89 up, and put the dash together, just to find out that I messed up two of the gauges. They are pegged all the time now, DOH!!

Throughout the week I gotta put hinge pins in, new gauges, new pull straps, fix the DS seatbelt (bottom strap doesn't retract) and a new caliper on the front right. Then the 89 is going byebye ASAP

longhorn71 · 05-02-2005, 12:59 AM

sanded the dash down in the blazer and fixed the rear gate

Izzy · 05-02-2005, 09:04 AM

Finished up detailing/sanding/polishing the truck around 2:30 saturday morning in time to get 3 hours of sleep before going to Dustoff.

Here's a new pic of the wifes truck I just painted:

bigblock73 · 05-02-2005, 09:20 AM

Looks awesome Izzy, excellent job!

edog1 · 05-02-2005, 09:22 AM

Still hanging drywall in my addition

cobb_ben · 05-02-2005, 09:56 AM

Wow that paint job looks good. Got a Din radio installed, Kenwood CD player. Then I put new bulbs in the dash, now I can see speed from 0-30ish, lol lot brighter. The one on the fuel gauge was out also.

*Zilverado* · 05-02-2005, 10:09 AM

Changed my water tank - - I mean the natural gas fired appliance in my house. It sprung a leak just as we were heading out the door to church yesterday morning. So, not quite how I was planning to spend my Sunday afternoon/evening, but that's the way it goes, I guess...

Slonaker · 05-02-2005, 10:27 AM

I wanted to go to Pate this weekend, but decided that 4+ hours each way plus walking around all day was just too much. I feel better hearing that there was not much of interest.

The only thing I did related to the truck this weekend was to drive it. I spent the weekend doing the two other things I am interested in, computers and scooters. I spent Saturday at a computer swapmeet. I didn't buy much, but it was fun looking around and drooling over all of the high end hardware.

Sunday was spent on a scooter ride. Scooter as in motor scooter. This was a 60 mile ride open to all types of modern and vintage scooters. We had a good showing of classic Vespas as well as a couple of Allstates and a Lambretta. Just in case anyone is interested in this stuff, you can view the pictures I took here:

http://www.slonaker.net/gallery/MC-S...-Ride-05-01-05

Slonaker

screwballl · 05-02-2005, 11:35 AM

wow looks awesome fiveeight

my weekend always consists of actually being at work on Sat
then Sun i got the baseboards, quarter round and door trim put up in the main bathroom. also got the vanity and sink put it but since theres no hardware stores open here on sundays i will have to wait till today (mon). luckily i have most the day off, just need to stop into work for a few hours to do some screening.

**Captkaos** · 05-02-2005, 03:21 PM

Quote:

Originally Posted by fiveeightchevy

Finished up detailing/sanding/polishing the truck around 2:30 saturday morning in time to get 3 hours of sleep before going to Dustoff.

Here's a new pic of the wifes truck I just painted:

It looks great Izzy, but something is missing in the picture....

Izzy · 05-02-2005, 03:51 PM

Oops, I'll have her pose for the next round of pics.

There will be plenty soon since it'll have the 2tone by the end of junes probably.

05-01-2005, 09:59 AM	#1
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	What did you get done? Yeah it's still early on Sunday, but this is my only chance to post today. I will be at the dowtown at the Goerge R. Brown convention center all day today for the final round of the Lonestar Regional volleyball tournament. My daughters team had an awesome day yesterday and won every match they played. That put them in the gold bracket today. If they can just hang in there and finish 3rd or better they qualify to play at the Junior Olympic nationals in Salt Lake City. About the only thing truck related I have done is wash and detail both our drivers. Boring job, but it has to be done. What did you get done? __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

05-01-2005, 01:13 PM	#2
SanitysBane Registered User Join Date: May 2004 Location: Lubbock, Texas Posts: 2,121	I put gas in my truck... __________________ '96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer

05-01-2005, 03:06 PM	#5
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,132	I cleaned the 74 after leaving work yesterday & stopped by the Dust-Off. Today, I went back out to Dust-Off w/my old buddy that couldn't go yesterday. Less there today than there was yesterday. Now it's furniture assembly time (a desk for the young one). I hope to get some time to work on my 74's bucket seat frame (I'm making a frame similar to the 67-8 'buddy' buckets). __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

05-01-2005, 05:11 PM	#6
AspecialZ Street Rod Restoration Join Date: Jan 2004 Location: Wellsburg, WV Posts: 882	details..... I painted the front end parts of the 76, came out real nice. Attached Images __________________ Follow me on Instagram @ hot_rod_shop

05-01-2005, 07:43 PM	#7
cliffsta Stepsides RULE Join Date: Jul 2004 Location: Pineville, LA Posts: 1,921	I helped my couisn move some more, hauled big loads saturday and sunday. partied saturday night. plannin' on cleanin' my interior up tonight or tomorrow. __________________ 1981 Chevy C10 Custom Deluxe Stepside 350 V8, headers, side exhausts, 3-speed auto SOLD 1980 Chevy C10 Custum Deluxe Stepside 305 V8, Edelbrock Performer Intake, Edelbrock 1406 600CFM 4-barrel, TH350C. Bent rod. SOLD 1984 GMC Sierra Classic Longbed 6.2L Diesel SOLD 2009 Kawasaki KLX-250S too many mods for this signature 1999 Honda Accord EX 4-cylinder, 17" Motegi Wheels 215/45/17 Sumitomo tires, Tein S-Tech lowering springs, KYB GR2 shocks, Acura TL 20mm rear swaybar, debadged, blackhoused headlights, Short-Ram Intake Cardomain of the Accord

05-01-2005, 02:27 PM	#3
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	Friday night, i came home from work and started cleaning up my 95 Grand Am back together, put a few finishing touches on it before i set it out for sale. set it out about 7pm. i woke up yesterday morning to hear the doorbell. i look out, and there's a minivan sitting at the end of the driveway next to the Grand Am. so i throw on some clothes, grab the keys, and head for the door. they look the car over real well, and ask to take it for a test drive. we go for a short drive (since the car has no plates or insurance) and then get down to business talking about a price. they offer $700, from my $1500 asking price i thought that was a little low. managed to talk them up to $900, and i let it go for that. considering i had just under $400 in the car, and i'm tired of looking at it, i dont think i did too bad. and since it sat out there just over 12 hours, i dont have to hear *****ing about the dead spots in the grass. went to my buddy's house and helped him and his cousin strip out the new derby truck. a '66 Ford F250. its a little rough around the edges, but overall a solid truck. he scored it no motor/no trans for $150. we'll put a small block Chevy and a TH350 in it and call it good. after stripping the truck, decided to go to the races. found out that there has been a rule change, and street stocks now allow pickups, where only mini stocks did before. got some wheels turning.... and im just sitting here watching the race now. i might go outside in a little bit and push the 86 out of the garage and start cleaning up.

05-01-2005, 03:05 PM	#4
plumbcut california fill Join Date: Apr 2004 Location: Sunny So-Cal Posts: 694	pulled the cover on my front dana 44 and found all the spiders and ring gear destroyed.. no big deal, 30 year old parts held up well.. So now I got a project to work on, ill have to pull the front axle in the next few days and put it on a stand and start rebuilding.. just not sure what to replace the open carrier with, just yet... Ill post pics later pc

05-01-2005, 08:13 PM	#8
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	i test drove an 01' mustang gt 5 speed. its slower than my truck oh, and i just finished installing Mac OSX 10.4 tiger i like it so far oh, and i liked the mustang a lot too Last edited by ocbaud; 05-01-2005 at 08:14 PM.

05-01-2005, 08:57 PM	#9
1974gmc In Progress Join Date: Feb 2005 Location: Kamloops, BC, Canada Posts: 312	saturday-got a canopy for my truck so i can go camping sunday-crack head offered to trade his pos 88 chevy 3/4t 4x4 for mine. guy must think im stupid or something. the motor was covered in oil, interior looked like sht, box was rusted. worth about half of mine. __________________ 1993 Chevrolet K2500 454 4L80E 1974 GMC 1/2t 2wd Stepside 305 auto sold* 1985 Ford Mustang GT 5.0 5spd

05-01-2005, 09:25 PM	#10
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	I had some friends come up from Austin, and we went to the Pate Swap meet out at TMS Saturday morning. There were loads of overpriced junk out there. Not much interesting. I almost picked up a white 86 GMC SWB, but teh dude was stuck on $2500. A little rich for that truck. There was an 87 with a not so great repaint and partial color change that was $5K. Waaaaay to much. We went home empty handed. The bright spot was seeing a set of slotted mags in 17" sizes. I almost bought a set, but cooler heads prevailed. Here is a link:http://www.americanracing.com/wheels...lloy&section=V . __________________ 1974 Jimmy- 5.3/4L80e/NP241

05-01-2005, 09:56 PM	#11
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	worked... mostly.... truck related? hmmmm Tues the passenger side exhaust fell off the truck.. the flat flange part of the collector actually seperated from the pipe.. wasnt rusted just cracked. Went ahead and had new collectors welded on both sides.. sounds soo much better now.. had been leaking for some time and i suppose i just got use to it.. towed it to a trans shop... yep.. it finally gave it up..going to stop by the shop in the morning and see how much its going to run. If its too rich for my blood i will have a buddy and his Jeep TJ (350 chevy, th400, 38" swampers) tow my truck home so i can tear it out myself..unfortunately i dont have a concrete driveway to lay on, and would rather not roll around in the dirt. At the moment i would rather have it done even if it cost alittle bit more.. but if worse comes to worse i will do it myself over a week or two time. Unfortunately that leaves 4 working adults with 2 cars... makes things difficult. hopefully tax return will come in soon.. was planning on using it on a front end rebuilt (tie rods, idler arm, pitman arm, ball joints, and control arm bushings). Oh well... we shall see what another week will bring.. __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call Last edited by Prerunner1982; 05-01-2005 at 10:37 PM.

05-01-2005, 10:26 PM	#12
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Cranked the truck and drove it around the block. 1st time its been ran in over a month now. Bought a new John Deere lawnmower....and mowed grass. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

05-01-2005, 11:27 PM	#13
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,345	well this weekend was not a truck related weekend.. my buddy towed his mitsubishi eclipse turbo ( yuck i know a ricer) and we put the trans in it he has some kind of boost system hes rigging up but hey i have all kind of tools and it was easier to do that here. the deal is i help him he does the clutch in my kids acura so thats a fair deal lol i do have to get some stuff done on the truck maybe next week the carpet needs to get done the exhaust is loose and i gotta fix that __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

05-01-2005, 11:45 PM	#14
TRUCKGUY Registered User Join Date: Jan 2005 Location: Nortonville, Ky Posts: 407	saturday morning woke up at 5:30...my mom,brother,sister went to a bull ride....i stayed in till about 12...then pulled some trucks around with my uncle...went to my other uncles place...looked at some junk....think thats it...sunday....got up went and welded on my uncle semie trailer till around 12:30...cam back cranked my 67 IH 2wd let it run for awhile and moved it then pulled the engine out of my 67 IH 4wd.....worked on my uncles 52 chevy....by then it was geting dark so we put up the tools and went in...so that's all folk's..... __________________ Dan. 55 F100 panel truck project 64 350/th400/10bolt short fleet 66 F100 302/C6/9" short fleet 67 IH 4x2 304/t984speed D44 373 locker lwb box 67 IH 4x4 304/t98 4speed/d44/d60 4.10'slwb box 67 IH Travelall 4x4 304/t98 4speed/12bolt/10bolt 81 2wd short fleet current build! 83 350/700r4 short fleet 88 k5 12" lift 3/4 ton swap mud toy 96 Dodge 3500 CUMMINS/5speed/4x2 97 Pontiac Trans Am WS6/LT1 383/6speed/T-tops

05-02-2005, 12:30 AM	#15
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	I cleaned the 89 up, and put the dash together, just to find out that I messed up two of the gauges. They are pegged all the time now, DOH!! Throughout the week I gotta put hinge pins in, new gauges, new pull straps, fix the DS seatbelt (bottom strap doesn't retract) and a new caliper on the front right. Then the 89 is going byebye ASAP __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)



Register or Log In To remove these advertisements.

05-02-2005, 12:59 AM	#16
longhorn71 Senior Member Join Date: Sep 2004 Location: CANADA Posts: 1,681	sanded the dash down in the blazer and fixed the rear gate

05-02-2005, 09:04 AM	#17
Izzy Trucker. Join Date: Nov 2002 Location: Fort Worth, TX Posts: 1,364	Finished up detailing/sanding/polishing the truck around 2:30 saturday morning in time to get 3 hours of sleep before going to Dustoff. Here's a new pic of the wifes truck I just painted:

05-02-2005, 09:20 AM	#18
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Looks awesome Izzy, excellent job! __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

05-02-2005, 09:22 AM	#19
edog1 Registered User Join Date: Oct 2003 Location: Santa Maria ,CA Posts: 142	Still hanging drywall in my addition

05-02-2005, 09:56 AM	#20
cobb_ben Registered User Join Date: Feb 2004 Location: Fort Leonard Wood Mo Posts: 299	Wow that paint job looks good. Got a Din radio installed, Kenwood CD player. Then I put new bulbs in the dash, now I can see speed from 0-30ish, lol lot brighter. The one on the fuel gauge was out also.

05-02-2005, 10:09 AM	#21
Zilverado Account Suspended Join Date: Nov 2002 Location: Winnipeg, Manitoba, Canada Posts: 798	Changed my water tank - - I mean the natural gas fired appliance in my house. It sprung a leak just as we were heading out the door to church yesterday morning. So, not quite how I was planning to spend my Sunday afternoon/evening, but that's the way it goes, I guess...

05-02-2005, 10:27 AM	#22
Slonaker Insert Witty Text Here Join Date: Oct 2002 Location: San Antonio, TX Posts: 3,415	I wanted to go to Pate this weekend, but decided that 4+ hours each way plus walking around all day was just too much. I feel better hearing that there was not much of interest. The only thing I did related to the truck this weekend was to drive it. I spent the weekend doing the two other things I am interested in, computers and scooters. I spent Saturday at a computer swapmeet. I didn't buy much, but it was fun looking around and drooling over all of the high end hardware. Sunday was spent on a scooter ride. Scooter as in motor scooter. This was a 60 mile ride open to all types of modern and vintage scooters. We had a good showing of classic Vespas as well as a couple of Allstates and a Lambretta. Just in case anyone is interested in this stuff, you can view the pictures I took here: http://www.slonaker.net/gallery/MC-S...-Ride-05-01-05 Slonaker __________________ '86 Chevy C10 (Sold 04/19/13 ) Stock '01 Silverado Last edited by Slonaker; 05-02-2005 at 10:28 AM.

05-02-2005, 11:35 AM	#23
screwballl Tonawanda 454 Join Date: Mar 2004 Location: Liquid Sunshine State Posts: 2,754	wow looks awesome fiveeight my weekend always consists of actually being at work on Sat then Sun i got the baseboards, quarter round and door trim put up in the main bathroom. also got the vanity and sink put it but since theres no hardware stores open here on sundays i will have to wait till today (mon). luckily i have most the day off, just need to stop into work for a few hours to do some screening. __________________ 91 Chevy Suburban Tonawanda 454 R2500 - SOLD!!! 04 Dodge Durango 5.7L Hemi 2WD, 24K miles (as of July 2011) In the past 30 years about 90% of Fords are still on the road, the other 10% made it home. -------------------

05-02-2005, 03:51 PM	#25
Izzy Trucker. Join Date: Nov 2002 Location: Fort Worth, TX Posts: 1,364	Oops, I'll have her pose for the next round of pics. There will be plenty soon since it'll have the 2tone by the end of junes probably.

Register or Log In To remove these advertisements.