78 Cheyenne parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

clarkjw24 · 05-05-2005, 03:25 PM

Parting whole thing. Motor, tranny, driveshafts, and axles are not for sale.
Door panels $25 plus shipping SOLD
Dash $20
Console w/brackets $25 plus shipping SOLD
Front seat brackets $25 plus shipping
Guage cluster with 100mph speedo and mech oil (got some sticky stuff on lense in front of fuel gauge) $30 SOLD
Bezel/with collar $25 shipped. SOLD
Original color was brown but PO painted everything black.
I've also got pic of the front and rear if you want anything let me know, it going to scrap next week.

I take paypal or money orders. PM or respond here.

beaterC10 · 05-05-2005, 04:00 PM

I am interested in the following parts:

rear hood bumper bolts
upper and lower grille opening trim
wiper switch and plug - if intermittent wipers
hood latch - if it has inside release

Shipping to 46229

Thanks, Dave

79BIG10 · 05-05-2005, 04:01 PM

How much for the front push guards, and console shipped to 76308?

Also can you post a pic of the front seat brackets? I'm wanting to see if they could work for me.

f.monroe · 05-05-2005, 07:21 PM

I want a total on the dash gauge panel , the door panels , and the console if it gets to me . Shipping to Caldwell ,Tx 77836 . As long as shipping isnt too bad I will take the three items mentioned .Thanks Frank .I have a paypal account if that works for you . Frank

clarkjw24 · 05-05-2005, 08:07 PM

Quote:

Originally Posted by beaterC10

I am interested in the following parts:

rear hood bumper bolts
upper and lower grille opening trim
wiper switch and plug - if intermittent wipers
hood latch - if it has inside release

Shipping to 46229

Thanks, Dave

no intermittent wipers
no inside release
so that leaves
rear hood bumper bolts (not exactly sure what these are but feel they're still on it)
upper and lower grille opening trim

For the items I have how about $17 shipped.

clarkjw24 · 05-05-2005, 08:09 PM

Quote:

Originally Posted by 79BIG10

How much for the front push guards, and console shipped to 76308?

Also can you post a pic of the front seat brackets? I'm wanting to see if they could work for me.

I'll get you a pic of the seat brackets in the morning. How about $15 for the push guards. If you want all three items it would be no more that $15 shipping on all of it.

clarkjw24 · 05-05-2005, 08:13 PM

Quote:

Originally Posted by f.monroe

I want a total on the dash gauge panel , the door panels , and the console if it gets to me . Shipping to Caldwell ,Tx 77836 . As long as shipping isnt too bad I will take the three items mentioned .Thanks Frank .I have a paypal account if that works for you . Frank

I've figured $9 a package. If 79BIG10 passes on the console then I would need to ship two packages. 1 with the bezel and console $9 and the other with the door panels $9. If no console I'll package the bezel and doorpanels together and it will be $9 shipping. I may try to package it all together and save a few bucks on shipping but I don't know that I will be able to find a box that large.

f.monroe · 05-05-2005, 08:26 PM

I want the panels and dash bezel for sure .I also am sure on the console if he passes .Let me know and I can do paypal. Frank

79BIG10 · 05-05-2005, 11:32 PM

Quote:

Originally Posted by clarkjw24

I'll get you a pic of the seat brackets in the morning. How about $15 for the push guards. If you want all three items it would be no more that $15 shipping on all of it.

Sounds great to me. When I see the pics I'll be able to tell if it will work or not.

beaterC10 · 05-06-2005, 08:44 AM

That sounds reasonable. The bolts I need are the ones near the cowl that have the hood stops on them. Do you have any close up shots of the grille trim, I was wanting to know how dented they were.

I forgot to ask about the headlight bezels, what shape are they in?

clarkjw24 · 05-06-2005, 09:35 PM

Grill trim is straight but the headlight bezels are pitted some. Here are pics of the seat brackets for 79BIG10

86swb · 05-06-2005, 11:08 PM

Are the push guards sold? I have been looking for some of these also.

f.monroe · 05-06-2005, 11:30 PM

Once 79BIG10 makes his decision on the console , let me know a total for the pieces I want and PM me the paypal account name . I am not in a hurry or anything and not trying to rush anyone .I just want to make sure I get the panels and dash bezel .Thanks, Frank

79BIG10 · 05-06-2005, 11:37 PM

Thanks for the pics. The brackets won't work for what I need.

But I will definately take the console and push guards. PM me the total shipped and how to send payment

beaterC10 · 05-07-2005, 07:37 AM

Quote:

Originally Posted by clarkjw24

no intermittent wipers
no inside release
so that leaves
rear hood bumper bolts (not exactly sure what these are but feel they're still on it)
upper and lower grille opening trim

For the items I have how about $17 shipped.

I will take the grille opening trim and the bumper bolts, and pass on the headlight doors. Can you send me a PM on the details. MO or Paypal? Thanks.

f.monroe · 05-07-2005, 11:09 AM

PM me a total on the door panels and dash panel to Caldwell Tx . 77836 and the paypal address to make payment to . Thanks Frank

clarkjw24 · 05-09-2005, 03:42 PM

Shipping and paypment PMs sent to the three guys with first dibs on items.

1980 Chevy · 05-11-2005, 08:33 AM

If you still have gauge cluster/gages, I'll take them.

clarkjw24 · 05-11-2005, 11:22 AM

Quote:

Originally Posted by 1980 Chevy

If you still have gauge cluster/gages, I'll take them.

Pm'd you.

Guys I've clean up the post and updated it. Those who bought stuff if you need the pictures again just pm me and I'll send them to you.

f.monroe · 05-26-2005, 05:20 PM

John ,
I sent you a PM . I need the tracking number to find out where the parts are .
Frank

f.monroe · 05-29-2005, 10:36 AM

ttt

f.monroe · 05-31-2005, 01:21 PM

John ,Please PM me the info I need to track the parts . Frank

79BIG10 · 05-31-2005, 08:39 PM

PM sent as well. Thanks, Brandon

clarkjw24 · 06-01-2005, 11:27 AM

Sorry Frank and Brandon for the delay. Somethings didn't get done like they were suspose to while I was away. Tracking #s will be pm'd today. Once again sorry for the delay.

GARMCo · 08-16-2005, 02:13 PM

Hi--I need the air cond./heater blower motor fan wheel -- this is the "hamster wheel" style circular fan wheel that attaches to the blower motor and moves the air through the heater and air conditioning ducts. I think any 73-78 Chevy truck will interchange. Thanks-- Tommy

05-05-2005, 03:25 PM	#1
clarkjw24 I like cheese Join Date: Aug 2004 Location: McBee, SC Posts: 192	78 Cheyenne parts Parting whole thing. Motor, tranny, driveshafts, and axles are not for sale. Door panels $25 plus shipping SOLD Dash $20 Console w/brackets $25 plus shipping SOLD Front seat brackets $25 plus shipping Guage cluster with 100mph speedo and mech oil (got some sticky stuff on lense in front of fuel gauge) $30 SOLD Bezel/with collar $25 shipped. SOLD Original color was brown but PO painted everything black. I've also got pic of the front and rear if you want anything let me know, it going to scrap next week. I take paypal or money orders. PM or respond here. __________________ Cruiser: 1972 K5, 400/TH350/NP205, D44 and 12Bolt, 35 TSLs. Trail rig: 86 K5, 350 TBI, SM465/NP205, 5.13s, 14ff locked, h1 beadlocks, 42" TSLs, 64" rears, 56" fronts, D60 locked, 35pline, drive flanges, crossover, hydro assist, OBA. Tow rig: 2002 F350 PSD CC Dually FX4, chipped, cold air intake, BFGs Last edited by clarkjw24; 05-11-2005 at 09:54 PM.

05-05-2005, 04:01 PM	#3
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	How much for the front push guards, and console shipped to 76308? Also can you post a pic of the front seat brackets? I'm wanting to see if they could work for me. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson Last edited by 79BIG10; 05-05-2005 at 04:18 PM.

05-06-2005, 09:35 PM	#11
clarkjw24 I like cheese Join Date: Aug 2004 Location: McBee, SC Posts: 192	Grill trim is straight but the headlight bezels are pitted some. Here are pics of the seat brackets for 79BIG10 __________________ Cruiser: 1972 K5, 400/TH350/NP205, D44 and 12Bolt, 35 TSLs. Trail rig: 86 K5, 350 TBI, SM465/NP205, 5.13s, 14ff locked, h1 beadlocks, 42" TSLs, 64" rears, 56" fronts, D60 locked, 35pline, drive flanges, crossover, hydro assist, OBA. Tow rig: 2002 F350 PSD CC Dually FX4, chipped, cold air intake, BFGs Last edited by clarkjw24; 05-11-2005 at 11:20 AM.

05-06-2005, 11:08 PM	#12
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	Are the push guards sold? I have been looking for some of these also. __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

05-06-2005, 11:37 PM	#14
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	Thanks for the pics. The brackets won't work for what I need. But I will definately take the console and push guards. PM me the total shipped and how to send payment __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

05-05-2005, 04:00 PM	#2
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	I am interested in the following parts: rear hood bumper bolts upper and lower grille opening trim wiper switch and plug - if intermittent wipers hood latch - if it has inside release Shipping to 46229 Thanks, Dave

05-05-2005, 07:21 PM	#4
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	I want a total on the dash gauge panel , the door panels , and the console if it gets to me . Shipping to Caldwell ,Tx 77836 . As long as shipping isnt too bad I will take the three items mentioned .Thanks Frank .I have a paypal account if that works for you . Frank

05-05-2005, 08:26 PM	#8
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	I want the panels and dash bezel for sure .I also am sure on the console if he passes .Let me know and I can do paypal. Frank

05-06-2005, 08:44 AM	#10
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	That sounds reasonable. The bolts I need are the ones near the cowl that have the hood stops on them. Do you have any close up shots of the grille trim, I was wanting to know how dented they were. I forgot to ask about the headlight bezels, what shape are they in?

05-06-2005, 11:30 PM	#13
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Once 79BIG10 makes his decision on the console , let me know a total for the pieces I want and PM me the paypal account name . I am not in a hurry or anything and not trying to rush anyone .I just want to make sure I get the panels and dash bezel .Thanks, Frank

05-07-2005, 11:09 AM	#16
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	PM me a total on the door panels and dash panel to Caldwell Tx . 77836 and the paypal address to make payment to . Thanks Frank

05-09-2005, 03:42 PM	#17
clarkjw24 I like cheese Join Date: Aug 2004 Location: McBee, SC Posts: 192	Shipping and paypment PMs sent to the three guys with first dibs on items. __________________ Cruiser: 1972 K5, 400/TH350/NP205, D44 and 12Bolt, 35 TSLs. Trail rig: 86 K5, 350 TBI, SM465/NP205, 5.13s, 14ff locked, h1 beadlocks, 42" TSLs, 64" rears, 56" fronts, D60 locked, 35pline, drive flanges, crossover, hydro assist, OBA. Tow rig: 2002 F350 PSD CC Dually FX4, chipped, cold air intake, BFGs

05-11-2005, 08:33 AM	#18
1980 Chevy Registered User Join Date: Apr 2004 Location: Burleson, Texas Posts: 55	If you still have gauge cluster/gages, I'll take them.

05-26-2005, 05:20 PM	#20
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	John , I sent you a PM . I need the tracking number to find out where the parts are . Frank

05-29-2005, 10:36 AM	#21
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	ttt



Register or Log In To remove these advertisements.

05-31-2005, 01:21 PM	#22
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	John ,Please PM me the info I need to track the parts . Frank

05-31-2005, 08:39 PM	#23
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	PM sent as well. Thanks, Brandon __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

06-01-2005, 11:27 AM	#24
clarkjw24 I like cheese Join Date: Aug 2004 Location: McBee, SC Posts: 192	Sorry Frank and Brandon for the delay. Somethings didn't get done like they were suspose to while I was away. Tracking #s will be pm'd today. Once again sorry for the delay. __________________ Cruiser: 1972 K5, 400/TH350/NP205, D44 and 12Bolt, 35 TSLs. Trail rig: 86 K5, 350 TBI, SM465/NP205, 5.13s, 14ff locked, h1 beadlocks, 42" TSLs, 64" rears, 56" fronts, D60 locked, 35pline, drive flanges, crossover, hydro assist, OBA. Tow rig: 2002 F350 PSD CC Dually FX4, chipped, cold air intake, BFGs

08-16-2005, 02:13 PM	#25
GARMCo Registered User Join Date: May 2004 Location: Georgia Posts: 43	Air COnd. part Hi--I need the air cond./heater blower motor fan wheel -- this is the "hamster wheel" style circular fan wheel that attaches to the blower motor and moves the air through the heater and air conditioning ducts. I think any 73-78 Chevy truck will interchange. Thanks-- Tommy __________________ 1973 K5

Register or Log In To remove these advertisements.