WTB Bench Seat Foam... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

longnlow72 · 05-11-2005, 11:04 PM

I am looking to buy foam for a bench seat. mine is really bad. not sure what it would cost but it was $160 in LMC if i remeber correct. just let me know what you got

-Ben

LUV2XCLR8 · 05-11-2005, 11:10 PM

A BOARD VENDOR WOULD PROBABLY BE CHEAPER THAN,

L - LUV
M - MY
C - CATALOG

CHECK THE LINK

http://67-72chevytrucks.com/vboard/a...ouncementid=10

longnlow72 · 05-11-2005, 11:13 PM

nevermind, lookin at the vendors it is 200 lol please someone help me

stllookn · 05-12-2005, 12:37 AM

You could purchase block foam from an upholstery supplier and cut it to shape. I don't know how difficult it would be to do this but I have seen some guys on the hotrod shows doing it with a special electric carving knife.

longnlow72 · 05-12-2005, 12:56 AM

i wonder what an upholstory shop would charge to do that

GMC Jim · 05-12-2005, 05:49 AM

I have a complete seat with good foam for $75.00 if you are interested.... ( good cover also !//////////Jim

Dan72cst · 05-12-2005, 08:52 AM

Used is probably the cheapest. If you decide to carve block foam, wait til the wife goes shopping and sneak in the kitchen and grab that electric carving knife. Works pretty darn good.

Ozark Tim · 05-12-2005, 02:13 PM

Man I have to tell you there is nothing like the addition of a new foam cusion in our trucks. I never could get the shape right tring to carve one.
I am a distributor for a company that sells them if you are interested.
Thats correct about the price of the new stuff. The Chinese are sucking up every bit of additional rescources that they can get there hands on leaving us in the USA without the buying power as in the past.
The replacement foam for the FULL FOAM SEAT MODELS ONLY 71 & 72 GM trucks is $212.80 ( Includes both seat & back cusions required ) currently and the raw material prices are volatile and subject to increase at any time. I am reading this info off of the manufacturers recent notice to me. The frieght could be upwards of $40.00 if you are as far as the East coast.
Not cheap, but if it is a slick truck you cant beat the comfort of the new cusion. They are a bit firmer and help support you better. It completely changes how you sit in your truck.
Thanks, OT

longnlow72 · 05-12-2005, 08:30 PM

gnc jim, would u be willin to sell just the foam for a lower price? thats all i need and figured its worth a try. does the seat flip forward? thanks

-Ben

GMC Jim · 05-13-2005, 02:00 AM

longnlow72; feel the seat is well worth $75.00 I am asking.... I paid over $100.00 for the seat cover if you can use it... is a pale torquoise; vinyl and an imitation velvet....The seat does not flip forward but I understand it can be modified to do so iif you wish............Jim

grovmister · 05-13-2005, 09:48 AM

I would like to be next in line on the seat. Any Pics???

Mike

longnlow72 · 05-13-2005, 10:15 AM

lemme kick it around and i get get back to you tonight

longnlow72 · 05-13-2005, 06:42 PM

grovmister, the seat is all yours im gonna have to pass

05-11-2005, 11:04 PM	#1
longnlow72 Registered User Join Date: Aug 2004 Location: SW Washington Posts: 947	WTB Bench Seat Foam... I am looking to buy foam for a bench seat. mine is really bad. not sure what it would cost but it was $160 in LMC if i remeber correct. just let me know what you got -Ben __________________ 72 Chevy lwb, cowl hood, shaved antenna, shaved bedrails, blazer tank, sidemarker fill, 1pc windows, flowmaster 40's, alpine deck, infinity 6x9's, infinity 4"ers, 2 jl audio 10w0's, grant wheel, keyless entry and alarm, more waiting to be done...

05-11-2005, 11:10 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	A BOARD VENDOR WOULD PROBABLY BE CHEAPER THAN, L - LUV M - MY C - CATALOG CHECK THE LINK http://67-72chevytrucks.com/vboard/a...ouncementid=10 __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T Last edited by LUV2XCLR8; 05-11-2005 at 11:11 PM.

05-11-2005, 11:13 PM	#3
longnlow72 Registered User Join Date: Aug 2004 Location: SW Washington Posts: 947	nevermind, lookin at the vendors it is 200 lol please someone help me __________________ 72 Chevy lwb, cowl hood, shaved antenna, shaved bedrails, blazer tank, sidemarker fill, 1pc windows, flowmaster 40's, alpine deck, infinity 6x9's, infinity 4"ers, 2 jl audio 10w0's, grant wheel, keyless entry and alarm, more waiting to be done...

05-12-2005, 12:37 AM	#4
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	You could purchase block foam from an upholstery supplier and cut it to shape. I don't know how difficult it would be to do this but I have seen some guys on the hotrod shows doing it with a special electric carving knife. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

05-12-2005, 12:56 AM	#5
longnlow72 Registered User Join Date: Aug 2004 Location: SW Washington Posts: 947	i wonder what an upholstory shop would charge to do that __________________ 72 Chevy lwb, cowl hood, shaved antenna, shaved bedrails, blazer tank, sidemarker fill, 1pc windows, flowmaster 40's, alpine deck, infinity 6x9's, infinity 4"ers, 2 jl audio 10w0's, grant wheel, keyless entry and alarm, more waiting to be done...

05-12-2005, 05:49 AM	#6
GMC Jim Senior Member Join Date: Dec 2002 Location: Portland, Oregon Posts: 901	I have a complete seat with good foam for $75.00 if you are interested.... ( good cover also !//////////Jim __________________ '71 GMC;fleetside;PB/PS/AC/CC/402 Eng./Custom Paint/110,000act miles/3 fuel tanks(52gal).

05-12-2005, 08:52 AM	#7
Dan72cst Registered User Join Date: Feb 2001 Location: Lake Stevens,WA 98258 North of Seattle Posts: 833	Used is probably the cheapest. If you decide to carve block foam, wait til the wife goes shopping and sneak in the kitchen and grab that electric carving knife. Works pretty darn good. __________________ Marysville, WA (Dan72cst@hotmail.com) 72 4wd Blazer CST 350/350 72 4wd Chevy LWB 350/350 68 2wd Chevy LWB 327/400 Last edited by Dan72cst; 05-12-2005 at 08:52 AM.

05-12-2005, 02:13 PM	#8
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	New foam Man I have to tell you there is nothing like the addition of a new foam cusion in our trucks. I never could get the shape right tring to carve one. I am a distributor for a company that sells them if you are interested. Thats correct about the price of the new stuff. The Chinese are sucking up every bit of additional rescources that they can get there hands on leaving us in the USA without the buying power as in the past. The replacement foam for the FULL FOAM SEAT MODELS ONLY 71 & 72 GM trucks is $212.80 ( Includes both seat & back cusions required ) currently and the raw material prices are volatile and subject to increase at any time. I am reading this info off of the manufacturers recent notice to me. The frieght could be upwards of $40.00 if you are as far as the East coast. Not cheap, but if it is a slick truck you cant beat the comfort of the new cusion. They are a bit firmer and help support you better. It completely changes how you sit in your truck. Thanks, OT

05-12-2005, 08:30 PM	#9
longnlow72 Registered User Join Date: Aug 2004 Location: SW Washington Posts: 947	gnc jim, would u be willin to sell just the foam for a lower price? thats all i need and figured its worth a try. does the seat flip forward? thanks -Ben __________________ 72 Chevy lwb, cowl hood, shaved antenna, shaved bedrails, blazer tank, sidemarker fill, 1pc windows, flowmaster 40's, alpine deck, infinity 6x9's, infinity 4"ers, 2 jl audio 10w0's, grant wheel, keyless entry and alarm, more waiting to be done... Last edited by longnlow72; 05-12-2005 at 08:30 PM.

05-13-2005, 02:00 AM	#10
GMC Jim Senior Member Join Date: Dec 2002 Location: Portland, Oregon Posts: 901	longnlow72; feel the seat is well worth $75.00 I am asking.... I paid over $100.00 for the seat cover if you can use it... is a pale torquoise; vinyl and an imitation velvet....The seat does not flip forward but I understand it can be modified to do so iif you wish............Jim __________________ '71 GMC;fleetside;PB/PS/AC/CC/402 Eng./Custom Paint/110,000act miles/3 fuel tanks(52gal).

05-13-2005, 09:48 AM	#11
grovmister Registered User Join Date: Dec 2003 Location: Eugene Or Posts: 51	I would like to be next in line on the seat. Any Pics??? Mike __________________ 72 Chevy C10 LWB 15X8 Chevy Corvette style rallys. 72 Chevy C10 LWB Truck Ralleys, tach, tilt, hidden hitch 72 Chevy Grn C20 Custom Camper 120K Newer Style Truck Alloys, Dailey Driver.

05-13-2005, 10:15 AM	#12
longnlow72 Registered User Join Date: Aug 2004 Location: SW Washington Posts: 947	lemme kick it around and i get get back to you tonight __________________ 72 Chevy lwb, cowl hood, shaved antenna, shaved bedrails, blazer tank, sidemarker fill, 1pc windows, flowmaster 40's, alpine deck, infinity 6x9's, infinity 4"ers, 2 jl audio 10w0's, grant wheel, keyless entry and alarm, more waiting to be done...

05-13-2005, 06:42 PM	#13
longnlow72 Registered User Join Date: Aug 2004 Location: SW Washington Posts: 947	grovmister, the seat is all yours im gonna have to pass __________________ 72 Chevy lwb, cowl hood, shaved antenna, shaved bedrails, blazer tank, sidemarker fill, 1pc windows, flowmaster 40's, alpine deck, infinity 6x9's, infinity 4"ers, 2 jl audio 10w0's, grant wheel, keyless entry and alarm, more waiting to be done...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.