See what I've got - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Nima** · 05-13-2005, 11:16 PM

Hey huys/gals:
I have heard bad things about LMC but I guess you never know until you try it yourself! maybe sound stupid!. Anyways, I've got this kit from them. It was delivered today. It looks good on the ground! i don't know what's gona happen when I try to instal it. It suppose to be bolt on!. The mufflers are sheap ones. You can't beat the price though:$179 to my door for the whole thing! I let you know how it goes. Unfortunately i don't think I can work on it this weekend.

1STtimePRo'71 · 05-13-2005, 11:35 PM

Nice Buy. Does the 67 have duals on it now? Good luck with the bolt on. What Brand?

**Nima** · 05-13-2005, 11:39 PM

Yes, it has dual pipe on it. Don't laugh at me I don't know the brand! but the quality seems to be good. They are manderal bent too. Excuse my spelling if it is not right, I am half drunk!. It is friday night after very very long week!.

68w/sbc406 · 05-13-2005, 11:46 PM

only half???

1STtimePRo'71 · 05-13-2005, 11:48 PM

I was going to say the same thing. By now you've probobly gotten to 3/4! Thats why you cant put it on tomarrow huh!?!

Russell · 05-13-2005, 11:53 PM

Used the axle bends and manifold turndown pipes from this kit for my 74 when I did it's duals up. I put on a set of Cherry Bomb Turbo mufflers, and that thing sounded quite good! Only thing that bugged me was that I got a manifold pipe welded up crooked, and it leaked

However, the pipes were of good quality, and I was quite happy with them!

**Nima** · 05-13-2005, 11:59 PM

HaHa Ha, I am try to get to that damn 3/4 but these beers doesn't work any more! Damn!. I am just kidding. This weekend I am a damn seminarr thing to go beside the fact that I have a hard time in my relationship right now, surprise!!!

68haywagon · 05-14-2005, 12:02 AM

I'm sure he's

by now. LOL. Time for my dose

.

1STtimePRo'71 · 05-14-2005, 12:06 AM

I'm gettin there.

**Nima** · 05-14-2005, 12:14 AM

I Love this board

1STtimePRo'71 · 05-14-2005, 12:22 AM

Me TOo.

*screamin_c102* · 05-14-2005, 01:00 AM

Going..............

Going...............

Gone.................

Night...Night....

Nima

Post some pics of the install, and any problems you might run into.

Rollie396 · 05-14-2005, 01:00 AM

nother round bartender!

68w/sbc406 · 05-14-2005, 01:02 AM

drink some micro brews. they work better than bud/coors

thecatseye66 · 05-14-2005, 03:30 AM

LOL

You guys crack me up.

kelsfine69 · 05-14-2005, 11:00 AM

take me drunk, i'm too home

Robert1970C20rstbukt · 05-14-2005, 11:23 AM

Pop a top, again...................

shifty · 05-14-2005, 02:11 PM

Hmmm, what kind of steel is it? Or is it aluminum? Is that a 2", 3" or other sized pipe?

I'm just curious. I need to redo the exhaust on my truck now that I got my new headers in.

Russell · 05-14-2005, 08:21 PM

Its aluminized piping

Either 2.25" or 2.5" (at least, I think those are the sizes you can get it in...

**Nima** · 05-14-2005, 10:17 PM

Ok, I am back and awake!. They are aluminized 2.25". Mufflers suppose to be turbo mufflers but I don't expect a great prformance out of them since they are very cheap. On their box it is written made bu IMCO whch I don't know what company is really is. I will post you guys with hopefully progress pics not problem list but not this weekend.
I hope all last night drunks are sober now! or may be the saga is continuing for tonight too!.
Stay healthy, be happy to all of you.

72gord · 05-15-2005, 08:40 AM

I put the same set up on my 68 K-20, only problem area was where it went over the transfer case on the passenger side, I had to bend that pipe just a touch for clearance.

05-13-2005, 11:16 PM	#1
Nima Blue 67 Join Date: Apr 2004 Location: Western WA Posts: 1,178	See what I've got Hey huys/gals: I have heard bad things about LMC but I guess you never know until you try it yourself! maybe sound stupid!. Anyways, I've got this kit from them. It was delivered today. It looks good on the ground! i don't know what's gona happen when I try to instal it. It suppose to be bolt on!. The mufflers are sheap ones. You can't beat the price though:$179 to my door for the whole thing! I let you know how it goes. Unfortunately i don't think I can work on it this weekend. Attached Images

05-13-2005, 11:35 PM	#2
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	Nice Buy. Does the 67 have duals on it now? Good luck with the bolt on. What Brand? __________________ -Cory 1967 2 Wheel Chevy

05-13-2005, 11:46 PM	#4
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	only half??? __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

05-13-2005, 11:48 PM	#5
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	I was going to say the same thing. By now you've probobly gotten to 3/4! Thats why you cant put it on tomarrow huh!?! __________________ -Cory 1967 2 Wheel Chevy

05-13-2005, 11:53 PM	#6
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Used the axle bends and manifold turndown pipes from this kit for my 74 when I did it's duals up. I put on a set of Cherry Bomb Turbo mufflers, and that thing sounded quite good! Only thing that bugged me was that I got a manifold pipe welded up crooked, and it leaked However, the pipes were of good quality, and I was quite happy with them! __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) Last edited by Russell; 05-13-2005 at 11:54 PM.

05-13-2005, 11:39 PM	#3
Nima Blue 67 Join Date: Apr 2004 Location: Western WA Posts: 1,178	Yes, it has dual pipe on it. Don't laugh at me I don't know the brand! but the quality seems to be good. They are manderal bent too. Excuse my spelling if it is not right, I am half drunk!. It is friday night after very very long week!.

05-13-2005, 11:59 PM	#7
Nima Blue 67 Join Date: Apr 2004 Location: Western WA Posts: 1,178	HaHa Ha, I am try to get to that damn 3/4 but these beers doesn't work any more! Damn!. I am just kidding. This weekend I am a damn seminarr thing to go beside the fact that I have a hard time in my relationship right now, surprise!!!

05-14-2005, 12:02 AM	#8
68haywagon I'm watching you! Join Date: Feb 2005 Location: Levittown, PA Posts: 1,822	I'm sure he's by now. LOL. Time for my dose . __________________ 2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold

05-14-2005, 12:06 AM	#9
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	I'm gettin there. __________________ -Cory 1967 2 Wheel Chevy

05-14-2005, 12:14 AM	#10
Nima Blue 67 Join Date: Apr 2004 Location: Western WA Posts: 1,178	I Love this board

05-14-2005, 12:22 AM	#11
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	Me TOo. __________________ -Cory 1967 2 Wheel Chevy

05-14-2005, 01:00 AM	#12
screamin_c102 Account Suspended Join Date: Feb 2005 Location: Yoncalla Oregon Posts: 775	Going.............. Going............... Gone................. Night...Night.... Nima Post some pics of the install, and any problems you might run into.

05-14-2005, 01:00 AM	#13
Rollie396 someday it will be done! Join Date: Sep 2004 Location: Lloydminster,AB. Canada Posts: 1,620	nother round bartender! __________________ '72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore. '80 LWB 2wd beater '67 GMC long fleet (cab donor) '66 long step (parked till it's turn comes around) '65 short step (parts truck that will donate it's bed and possibly frame to the '66) '06 Grand Prix wife's car (she hardly lets me touch it) my pics

05-14-2005, 01:02 AM	#14
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	drink some micro brews. they work better than bud/coors __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

05-14-2005, 03:30 AM	#15
thecatseye66 '68 C-20 396 CST CC Join Date: Mar 2005 Location: Spokane, WA Posts: 454	LOL You guys crack me up.



Register or Log In To remove these advertisements.

05-14-2005, 11:00 AM	#16
kelsfine69 18 Till I Die Join Date: Mar 2005 Location: Alberta, Canada Posts: 1,522	take me drunk, i'm too home

05-14-2005, 11:23 AM	#17
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Pop a top, again................... __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

05-14-2005, 02:11 PM	#18
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Hmmm, what kind of steel is it? Or is it aluminum? Is that a 2", 3" or other sized pipe? I'm just curious. I need to redo the exhaust on my truck now that I got my new headers in. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

05-14-2005, 08:21 PM	#19
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Its aluminized piping Either 2.25" or 2.5" (at least, I think those are the sizes you can get it in... __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) Last edited by Russell; 05-14-2005 at 08:22 PM.

05-14-2005, 10:17 PM	#20
Nima Blue 67 Join Date: Apr 2004 Location: Western WA Posts: 1,178	Ok, I am back and awake!. They are aluminized 2.25". Mufflers suppose to be turbo mufflers but I don't expect a great prformance out of them since they are very cheap. On their box it is written made bu IMCO whch I don't know what company is really is. I will post you guys with hopefully progress pics not problem list but not this weekend. I hope all last night drunks are sober now! or may be the saga is continuing for tonight too!. Stay healthy, be happy to all of you.

05-15-2005, 08:40 AM	#21
72gord Never enough time!! Join Date: Mar 2004 Location: sw Wisconsin Posts: 602	I put the same set up on my 68 K-20, only problem area was where it went over the transfer case on the passenger side, I had to bend that pipe just a touch for clearance.

Register or Log In To remove these advertisements.