'91 Steering wheel on my '70 Burb-I need Help! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

86swb · 05-26-2005, 03:48 PM

I have been trying to put the '91 Chevy 1/2 Ton Pickup steering wheel on my '70 Suburban and can not figure out how it goes on. I know these will work. I have seen many of these trucks with them. What is it I am doing wrong? I need step by step instructions. I need help. Thanks

krue · 05-26-2005, 04:08 PM

What are you having trouble with? Getting the steering wheel on? Getting the old one off? Getting the horn to work?

86swb · 05-26-2005, 04:43 PM

I got the old one off-no problem there. Getting the '91 on "and" making sure the horn will work. There is the problem. I tried to push the wheel on but would not go all the way. Just do not know what to do now. Thought it would be an easy swap. Wrong.

**john** · 05-26-2005, 05:33 PM

FAQ

86swb · 05-26-2005, 06:38 PM

Quote:

Originally Posted by john

FAQ

The first picture with the red interior has the wheel just like the one I am trying to put on my '70. I do not have any doner parts. All I have is the wheel I won off of e-bay and the parts that came out of the '70 column.

kaycee · 05-26-2005, 08:38 PM

Is it catching the splines or not I put 1 on a van tilt and it would not go on all the way but would still catch splines.It would lack about a 1/4" from going all the way on,I took a grinder and worked down the coller on the shaft and it went right on.

86swb · 05-26-2005, 10:12 PM

I am not to sure about a grinder "yet". Sledge hammer- maby. I am about ready to just put the old one back on.

krue · 05-27-2005, 12:15 AM

The biggest problem I had with mine was getting the old one off. I didn't bother with trying to get the horn to work. The only problem I had with my s-10 steering wheel was fixing the boogered threads on the shaft (told ya I had he!! getting the old one off). Thread file fixed that.

68w/sbc406 · 05-27-2005, 03:19 AM

make sure the splines on the inside of the wheel are clean and undamaged. mine slid right on, took me about 45 minutes to makemy stuff work without the donor parts. if your horn has a wire like mine did. i pulled the metal rod out and caught all the parts. soldered a wire on to the spring, put the sprind and the little keeper thingy back in and then crimped a connector on the end of the wire. clear as mudd?

05-26-2005, 03:48 PM	#1
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	'91 Steering wheel on my '70 Burb-I need Help! I have been trying to put the '91 Chevy 1/2 Ton Pickup steering wheel on my '70 Suburban and can not figure out how it goes on. I know these will work. I have seen many of these trucks with them. What is it I am doing wrong? I need step by step instructions. I need help. Thanks __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

05-26-2005, 04:08 PM	#2
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	What are you having trouble with? Getting the steering wheel on? Getting the old one off? Getting the horn to work? __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

05-26-2005, 04:43 PM	#3
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	I got the old one off-no problem there. Getting the '91 on "and" making sure the horn will work. There is the problem. I tried to push the wheel on but would not go all the way. Just do not know what to do now. Thought it would be an easy swap. Wrong. __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

05-26-2005, 05:33 PM	#4
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	FAQ __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

05-26-2005, 08:38 PM	#6
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,445	Is it catching the splines or not I put 1 on a van tilt and it would not go on all the way but would still catch splines.It would lack about a 1/4" from going all the way on,I took a grinder and worked down the coller on the shaft and it went right on. __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327

05-26-2005, 10:12 PM	#7
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	I am not to sure about a grinder "yet". Sledge hammer- maby. I am about ready to just put the old one back on. __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

05-27-2005, 12:15 AM	#8
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	The biggest problem I had with mine was getting the old one off. I didn't bother with trying to get the horn to work. The only problem I had with my s-10 steering wheel was fixing the boogered threads on the shaft (told ya I had he!! getting the old one off). Thread file fixed that. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

05-27-2005, 03:19 AM	#9
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	make sure the splines on the inside of the wheel are clean and undamaged. mine slid right on, took me about 45 minutes to makemy stuff work without the donor parts. if your horn has a wire like mine did. i pulled the metal rod out and caught all the parts. soldered a wire on to the spring, put the sprind and the little keeper thingy back in and then crimped a connector on the end of the wire. clear as mudd? __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.