Truck and parts for sale!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 05-28-2005, 06:28 PM

Starting a new thread, these are left
72 swb 2wd with cab, no title has a small crack in frame $150
69 or 70 (not sure) GMC 1 ton, 350 4 speed, body has had some work on it, not done very good. I do not know if it runs or not, no brake booster. $300, no title
Thanks Randy

teeitup · 05-28-2005, 06:30 PM

72 swb

teeitup · 05-28-2005, 07:06 PM

Scott, would rather keep it whole I think, its welded to the frame. Thanks Randy

72gord · 05-29-2005, 08:29 AM

The bed being welded to the frame is going to make me have to pass Randy, looking to make a dump, don't want to screw up the frame or bed cutting it off with a torch!! Unless you think it can be done without too much damage to the frame and bed....Btw still got two to look at locally. Later, Gord

teeitup · 05-29-2005, 08:46 AM

No problem Gord.
Everyone else I edited prices, they are going on ebay today.
Thanks Randy

LUV2XCLR8 · 05-29-2005, 08:48 AM

If you were closer I'd buy the dually, I would luv to have a GMC

teeitup · 05-29-2005, 09:00 AM

I wish you were closer Craig, I'd love to check out your GQ, I'm going to have one some day, just got to find the right one

fastwillie 696969 · 05-29-2005, 10:33 AM

do you have a crossmember for a 4 spd
i got a munice 4 spd im looking for a crossmember
thanks

teeitup · 05-29-2005, 11:18 AM

Sorry none right now
Here are 2 more trucks
67 1 ton with a V8 and a 4 speed, home made wrecker with winch, has title
$700
70 1 ton, nice cab, some rust on drivers side rocker, a few dents in back of cab. Has a real good pass door. Front clip is trash. 6 cyl, but has some parts missing, no brake booster. Tommy lift on back. No title, $400 for all
72 3/4 4x4 rolling frame, AT and 205, title and vin $700
Thanks Randy

teeitup · 05-29-2005, 11:19 AM

70 1 ton

teeitup · 05-29-2005, 11:20 AM

72 3/4 4x4

teeitup · 05-29-2005, 12:43 PM

I'll try to get out there and get some more pics of the parts I got for sale. Thanks Randy

72 Cheyenne K20 · 05-29-2005, 09:08 PM

Hey Randy, I'm looking for a set of lower 4 core rad support brackets, cab wiring harness for gauges and no A/C, air cleaner spacer with hose for 4 barrel. All of this is for a 72'

Tnanks, Scott

Roberty · 05-29-2005, 10:09 PM

I wish you were closer to me Randy. I'd sure like to have that '72 3/4 ton 4x4 chassis.

That would make me an excellent start for my '72 Cheyenne Super future project in my sig.

teeitup · 05-30-2005, 08:14 AM

Scott, I have the carb spacer that is all, $10 plus shipping
Roberty, it would make a great project, road trip????

Thanks Randy

OhioDan · 05-30-2005, 08:47 AM

Any Fleetside rear bumper brackets? If so, how much and shipping to 45344. Thanx, Dan.

teeitup · 05-30-2005, 08:59 AM

I'm headed out there in awhile I'll look Dan, Thanks Randy

teeitup · 06-01-2005, 09:21 PM

Don, I got a set, one is bent a little bit but can be straightened easily enough. $30 plus shipping.

Thanks Randy

RPOZ11 · 06-03-2005, 02:57 PM

Randy , here is a pic of what I need...In this pic, you can sort of see that one side is longer at the post/threaded area.....

rambler · 06-03-2005, 03:35 PM

Randy, PM'd ya

teeitup · 06-03-2005, 05:05 PM

Price changes up above!!!!!

RPOZ11, I'll go look tonight
Joe, I pm'd you back
Thanks Randy

teeitup · 06-03-2005, 05:34 PM

70 GMC 1 ton is sold!!!!!!!!

c10crazy · 06-04-2005, 11:12 AM

teeitup- how much do you sell a set of 72' style door panels for?. They don't have to be the same color because they would just get spray painted anyway.

teeitup · 06-04-2005, 11:23 AM

$20 plus shipping, Thanks Randy

05-28-2005, 06:28 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Truck and parts for sale!!! Starting a new thread, these are left 72 swb 2wd with cab, no title has a small crack in frame $150 69 or 70 (not sure) GMC 1 ton, 350 4 speed, body has had some work on it, not done very good. I do not know if it runs or not, no brake booster. $300, no title Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 06-03-2005 at 05:09 PM.

05-28-2005, 06:30 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	72 swb Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-28-2005, 07:06 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Scott, would rather keep it whole I think, its welded to the frame. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-29-2005, 08:46 AM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	No problem Gord. Everyone else I edited prices, they are going on ebay today. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-29-2005, 08:48 AM	#6
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,482	If you were closer I'd buy the dually, I would luv to have a GMC __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-29-2005, 08:29 AM	#4
72gord Never enough time!! Join Date: Mar 2004 Location: sw Wisconsin Posts: 602	The bed being welded to the frame is going to make me have to pass Randy, looking to make a dump, don't want to screw up the frame or bed cutting it off with a torch!! Unless you think it can be done without too much damage to the frame and bed....Btw still got two to look at locally. Later, Gord

05-29-2005, 09:00 AM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I wish you were closer Craig, I'd love to check out your GQ, I'm going to have one some day, just got to find the right one __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-29-2005, 10:33 AM	#8
fastwillie 696969 ~Rest In Peace~ Join Date: May 2005 Location: CALIFORNIA NOR CAL Posts: 9,707	do you have a crossmember for a 4 spd i got a munice 4 spd im looking for a crossmember thanks __________________ is it fast ? it has a lighting bolt donut? B___H please, I can remove 90% of your so called "beauty" with a kleenex

05-29-2005, 11:18 AM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Sorry none right now Here are 2 more trucks 67 1 ton with a V8 and a 4 speed, home made wrecker with winch, has title $700 70 1 ton, nice cab, some rust on drivers side rocker, a few dents in back of cab. Has a real good pass door. Front clip is trash. 6 cyl, but has some parts missing, no brake booster. Tommy lift on back. No title, $400 for all 72 3/4 4x4 rolling frame, AT and 205, title and vin $700 Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 06-03-2005 at 05:04 PM.

05-29-2005, 11:19 AM	#10
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	70 1 ton Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-29-2005, 11:20 AM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	72 3/4 4x4 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-29-2005, 12:43 PM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I'll try to get out there and get some more pics of the parts I got for sale. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-29-2005, 09:08 PM	#13
72 Cheyenne K20 Registered User Join Date: Feb 2003 Location: Staunton, Virginia Posts: 554	Hey Randy, I'm looking for a set of lower 4 core rad support brackets, cab wiring harness for gauges and no A/C, air cleaner spacer with hose for 4 barrel. All of this is for a 72' Tnanks, Scott Last edited by 72 Cheyenne K20; 05-29-2005 at 09:09 PM.

05-29-2005, 10:09 PM	#14
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	I wish you were closer to me Randy. I'd sure like to have that '72 3/4 ton 4x4 chassis. That would make me an excellent start for my '72 Cheyenne Super future project in my sig. __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored

05-30-2005, 08:14 AM	#15
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Scott, I have the carb spacer that is all, $10 plus shipping Roberty, it would make a great project, road trip???? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

05-30-2005, 08:47 AM	#16
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	Any Fleetside rear bumper brackets? If so, how much and shipping to 45344. Thanx, Dan. __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started.

05-30-2005, 08:59 AM	#17
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I'm headed out there in awhile I'll look Dan, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-01-2005, 09:21 PM	#18
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Don, I got a set, one is bent a little bit but can be straightened easily enough. $30 plus shipping. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 06-03-2005 at 05:06 PM.

06-03-2005, 02:57 PM	#19
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	Mirror need Randy , here is a pic of what I need...In this pic, you can sort of see that one side is longer at the post/threaded area..... Attached Images __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS Last edited by RPOZ11; 06-03-2005 at 02:58 PM.

06-03-2005, 03:35 PM	#20
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	Randy, PM'd ya __________________ No matter where you are..... There you are... Buckaroo Banzi

06-03-2005, 05:05 PM	#21
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Price changes up above!!!!! RPOZ11, I'll go look tonight Joe, I pm'd you back Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-03-2005, 05:34 PM	#22
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	70 GMC 1 ton is sold!!!!!!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-04-2005, 11:12 AM	#23
c10crazy Like a Rock! Join Date: May 2002 Location: USA Posts: 1,092	teeitup- how much do you sell a set of 72' style door panels for?. They don't have to be the same color because they would just get spray painted anyway. __________________ 69 LWB Runs great - work in progress Mess with me and you mess with the whole trailer park!

06-04-2005, 11:23 AM	#24
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	$20 plus shipping, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.