68 K10 drivetrain questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HugrOrang71 · 05-29-2005, 02:17 AM

What front end should be under this truck? I'm thinking it is a closed knuckle Dana 44.

Also, what 4 speed and transfer case was used in 68?

Thanks

Blazer1970 · 05-29-2005, 07:10 AM

You are correct on the front axle.
4 speed would be a SM420 (reverse down and to the left) and the t-case is a Rockwell T-221. The Rockwell is easily identified because the rear output is a few inches lower than the input. I believe '68 is the only year for a married 465/221 combo.

HugrOrang71 · 05-29-2005, 01:24 PM

Thank you very much.

Hawged-67 · 05-31-2005, 12:33 PM

i had a 68 k20 with the 44 closed knuckle 17.5 wheels, it had a rockwell T-221 and a SM 465 (reverse down to the right, not left.

05-29-2005, 02:17 AM	#1
HugrOrang71 Bite me, import boy Join Date: Apr 2005 Location: Eagle Point, Oregon Posts: 102	68 K10 drivetrain questions What front end should be under this truck? I'm thinking it is a closed knuckle Dana 44. Also, what 4 speed and transfer case was used in 68? Thanks __________________ Jason '71 C-10 Deluxe-under construction '69 C20, 396,T400-donor truck, '65 C10 project "Facts are meaningless, You can use facts to prove anything that's even remotely true."

05-29-2005, 07:10 AM	#2
Blazer1970 Registered User Join Date: Dec 1999 Location: Old Mission, MI, USA Posts: 2,507	You are correct on the front axle. 4 speed would be a SM420 (reverse down and to the left) and the t-case is a Rockwell T-221. The Rockwell is easily identified because the rear output is a few inches lower than the input. I believe '68 is the only year for a married 465/221 combo. __________________ Tim

05-29-2005, 01:24 PM	#3
HugrOrang71 Bite me, import boy Join Date: Apr 2005 Location: Eagle Point, Oregon Posts: 102	Thank you very much. __________________ Jason '71 C-10 Deluxe-under construction '69 C20, 396,T400-donor truck, '65 C10 project "Facts are meaningless, You can use facts to prove anything that's even remotely true."

05-31-2005, 12:33 PM	#4
Hawged-67 Registered User Join Date: Oct 2004 Location: Coshocton OH Posts: 27	i had a 68 k20 with the 44 closed knuckle 17.5 wheels, it had a rockwell T-221 and a SM 465 (reverse down to the right, not left. __________________ '67 chevy on '79 K10 frame Metallic Grey-Fleet White top 35in Ground Hawgs 355 ci, SM 465, NP 205 "A Dying Breed...Classic Chevy"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.