Bargain or waste!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Nima · 06-12-2005, 08:28 PM

Hey all, Today, we were heading out for lunch when we saw this small moving out of state garage sale. Well we stopped and looked around and I came cross this too box which had number of hand and air tools in it. Anyway, I brought it home for 80$. These are the air tool. I have 22 gallon air compressor but I just used it for small projects around the house. Now I need you help. Did I waste my money? regardless of the answer, for the rachets how do you use them? I don't want to brake any bolts!. Also what is the proper maintenance for these? The only lady who was selling them, believed that all we in working condition up to few months ago. I see, it is written on the body of some of them that they need to be oiled. Some have a place for it but in some I could'nt find anything. Sorry if these questions are too basic for some of you. and thanks ahead.

*Randy70C-10* · 06-12-2005, 08:31 PM

You got a bargain, the only maintenance required is to drip a couple drops of air tool oil down the nipple that the air hose connects to before each use.

matthufham · 06-12-2005, 08:41 PM

i got the big impact air ratchet in the middle. it's difficult to get a socket on and off sometimes.

Bamm · 06-12-2005, 08:45 PM

Man, did she shaft you. (Insert shady used car dealer-like voice here) But tell you what i'll do for you, since I like you and you seem like a good guy and all, I'll give you (painfully intentional pause) I don't know, say $100 for the whole bunch. Only cause you're a good guy and I hate seeing good guys get the shaft.

Good score man...........Jerry

jc · 06-12-2005, 09:08 PM

that 1/4 inch IR ratchet is probably worth the $80 alone used close to 200 for new, and its handy as hell.
the 1/2 inch blue point is snap on, try to buy a new one for less than $200
every thing else is nice also
excelant deal

*Randy70C-10* · 06-12-2005, 09:12 PM

The Blue Point will last forever, I have one of those too, and yep, it's Snap-on!

*dtlilly* · 06-12-2005, 09:55 PM

Geeze! You got a smoking deal on those! As Randy said, just put a couple drops of iol in the air inlet, hit the throttle a couple times in each direction, and your set! Just go down to Sears for a bottle of the air tool oil.

Jerry, remind me never to fall for your plaid suit wearing slick talk...

Nima · 06-12-2005, 10:03 PM

Thanks. I feel very good now!.

70 net440 · 06-12-2005, 10:34 PM

I have a CP 1/2'' gun like the one in the center. Haven't had a bit trouble in almost twenty years. I think I paid about $70 for it back then.

krue · 06-12-2005, 10:43 PM

You did good.

**68 Stepside** · 06-12-2005, 10:48 PM

Wanna sell one of the 3/8" air ratchets cheap? I'd prefer the Mac one :p You stole that stuff for that kinda money!

pickemup · 06-12-2005, 11:43 PM

you got ripped butill take the whole lot from ya for the same 80 bucks that way you get your money back.
great find.

farside847 · 06-13-2005, 10:57 AM

You MUST oil them every time. Dont forget. If you are lazy like me you can put one of those "auto-oil" things inline on your air hose.

papawswrench · 06-13-2005, 11:05 AM

Nice score !! If I had them I would use the best and sell the rest , and make money .
Practise using them to get the hang of 'em so you don't break anything , and start out with lower pressure at first . Keep water out of your air lines ! Some of them may have an adjustment for torque , use only what you need to get things loose .
Papao55

papawswrench · 06-13-2005, 11:07 AM

The small one on the left looks like a hand impact , useful for small bolts and screws that are frozen . Twist it the way you want to go and smack it with a hammer !

chickenwing · 06-13-2005, 12:48 PM

Quote:

Originally Posted by papao55

The small one on the left looks like a hand impact , useful for small bolts and screws that are frozen . Twist it the way you want to go and smack it with a hammer !

Use that one for large phillips screws. The ones that come to mind are the tailgate handle screws and the bench seat screws.

bmg · 06-13-2005, 09:01 PM

What a steal. I have used Marvel oil in mine for years and no problems.

Nima · 06-13-2005, 10:13 PM

Thanks guys. How much air pressure do you need? how many psi for routine use?

chickenwing · 06-13-2005, 11:00 PM

I don;t have any "nice" air tools like that. My best one is a CP 3/8" impact, its torque rating was based at 90psi at I think 4cfm.

06-12-2005, 08:28 PM	#1
Nima Blue 67 Join Date: Apr 2004 Location: Western WA Posts: 1,179	Bargain or waste!! Hey all, Today, we were heading out for lunch when we saw this small moving out of state garage sale. Well we stopped and looked around and I came cross this too box which had number of hand and air tools in it. Anyway, I brought it home for 80$. These are the air tool. I have 22 gallon air compressor but I just used it for small projects around the house. Now I need you help. Did I waste my money? regardless of the answer, for the rachets how do you use them? I don't want to brake any bolts!. Also what is the proper maintenance for these? The only lady who was selling them, believed that all we in working condition up to few months ago. I see, it is written on the body of some of them that they need to be oiled. Some have a place for it but in some I could'nt find anything. Sorry if these questions are too basic for some of you. and thanks ahead. Attached Images

06-12-2005, 08:45 PM	#4
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Man, did she shaft you. (Insert shady used car dealer-like voice here) But tell you what i'll do for you, since I like you and you seem like a good guy and all, I'll give you (painfully intentional pause) I don't know, say $100 for the whole bunch. Only cause you're a good guy and I hate seeing good guys get the shaft. Good score man...........Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

06-12-2005, 09:08 PM	#5
jc Registered User Join Date: Jan 2001 Location: Jackson, New Jersey Posts: 1,560	that 1/4 inch IR ratchet is probably worth the $80 alone used close to 200 for new, and its handy as hell. the 1/2 inch blue point is snap on, try to buy a new one for less than $200 every thing else is nice also excelant deal __________________ 2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER)

06-12-2005, 10:34 PM	#9
70 net440 Junior Member Join Date: Sep 2003 Location: yreka, ca Posts: 270	I have a CP 1/2'' gun like the one in the center. Haven't had a bit trouble in almost twenty years. I think I paid about $70 for it back then. __________________ 63 C10 70 Coronet R/T 67 C10 70 Dart Swinger 71 K10

06-12-2005, 10:43 PM	#10
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	You did good. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

06-12-2005, 08:31 PM	#2
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	You got a bargain, the only maintenance required is to drip a couple drops of air tool oil down the nipple that the air hose connects to before each use.

06-12-2005, 08:41 PM	#3
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	i got the big impact air ratchet in the middle. it's difficult to get a socket on and off sometimes.

06-12-2005, 09:12 PM	#6
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	The Blue Point will last forever, I have one of those too, and yep, it's Snap-on!

06-12-2005, 09:55 PM	#7
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Geeze! You got a smoking deal on those! As Randy said, just put a couple drops of iol in the air inlet, hit the throttle a couple times in each direction, and your set! Just go down to Sears for a bottle of the air tool oil. Jerry, remind me never to fall for your plaid suit wearing slick talk...

06-12-2005, 10:03 PM	#8
Nima Blue 67 Join Date: Apr 2004 Location: Western WA Posts: 1,179	Thanks. I feel very good now!.

06-12-2005, 10:48 PM	#11
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,690	Wanna sell one of the 3/8" air ratchets cheap? I'd prefer the Mac one :p You stole that stuff for that kinda money! __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

06-12-2005, 11:43 PM	#12
pickemup Registered User Join Date: Jun 2005 Location: fresno calif. Posts: 88	you got ripped butill take the whole lot from ya for the same 80 bucks that way you get your money back. great find.

06-13-2005, 10:57 AM	#13
farside847 Registered User Join Date: Feb 2005 Location: Bay Area, California Posts: 995	You MUST oil them every time. Dont forget. If you are lazy like me you can put one of those "auto-oil" things inline on your air hose. __________________ 1971 Chevy C10 Shortbed Stepside, 307v8 3-on-the-tree

06-13-2005, 11:05 AM	#14
papawswrench Senior Member Join Date: Jan 2003 Location: Alvin ,TX Posts: 2,172	Nice score !! If I had them I would use the best and sell the rest , and make money . Practise using them to get the hang of 'em so you don't break anything , and start out with lower pressure at first . Keep water out of your air lines ! Some of them may have an adjustment for torque , use only what you need to get things loose . Papao55 __________________ papawswrench Certified wrench hound ! Tool Talk Randomview PapawsImages https://www.flickr.com/photos/nhankamer/

06-13-2005, 11:07 AM	#15
papawswrench Senior Member Join Date: Jan 2003 Location: Alvin ,TX Posts: 2,172	The small one on the left looks like a hand impact , useful for small bolts and screws that are frozen . Twist it the way you want to go and smack it with a hammer ! __________________ papawswrench Certified wrench hound ! Tool Talk Randomview PapawsImages https://www.flickr.com/photos/nhankamer/ Last edited by papao55; 06-13-2005 at 11:08 AM.



Register or Log In To remove these advertisements.

06-13-2005, 09:01 PM	#17
bmg Registered User Join Date: Nov 2001 Location: Indianapolis, IN USA Posts: 157	What a steal. I have used Marvel oil in mine for years and no problems.

06-13-2005, 10:13 PM	#18
Nima Blue 67 Join Date: Apr 2004 Location: Western WA Posts: 1,179	Thanks guys. How much air pressure do you need? how many psi for routine use?

06-13-2005, 11:00 PM	#19
chickenwing Lovin' Life in Miss.! Join Date: Mar 2004 Location: Puckett, Mississippi Posts: 1,937	I don;t have any "nice" air tools like that. My best one is a CP 3/8" impact, its torque rating was based at 90psi at I think 4cfm. __________________ The truck... you hear that? No really, you did hear that?!!!

Register or Log In To remove these advertisements.