WTB : 4"-6" lift kit for 67-72 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**BAD4X4** · 06-13-2005, 05:34 PM

I'm looking for a good 4-6" lift kit for my new 1972 k20. I would like a good used one. I don't want to spend alot of money on a work truck.Thanx for the help. Dana

ryanroo · 06-13-2005, 05:51 PM

i have an 8 inch all spring kit that is still on the truck(been setting for about 3 years) with like 250 miles on it. considering selling it.
Ryan

**BAD4X4** · 06-13-2005, 09:35 PM

Didn't really wanna go that big, but I will think about it. Do you have any pics of the kit on the truck and pics of under the truck. Thanx Dana

**special-K** · 06-14-2005, 05:45 AM

Hey Ryan,how much dinero?

ryanroo · 06-14-2005, 10:24 PM

i have a few pictures, but not on thiscomputer, i could get some if you wanted. for all four springs and a drop draglink and raised steering arm (71/72 d44 only) i would like to get like 550 dollars plus the cost of shipping from 50801. i paid over 1300 when i bought it, but that was with shocks and brake lines. i will keep the lines and the shocks are ruined from setting without use for to long. this is still on the truck and i would have to have time to remove it and get new springs for it as well.
Thanks
Ryan

**BAD4X4** · 06-16-2005, 08:23 PM

I know when I didn't need a lift a couple weeks ago there was a ton for sale, just my luck...............

orange72blazer · 06-17-2005, 08:16 AM

I'll have some 4" front springs for sale in a couple of days. They have about 250 miles on them. I'm asking $100 for them plus shipping. I plan on putting my new springs on this weekend.

**BAD4X4** · 06-17-2005, 07:48 PM

Orange is that just for the front springs? Why are you changring out? Thanx Dana

orange72blazer · 06-17-2005, 10:02 PM

Yes its just the front springs. You would have to buy blocks for the rear($38) , and u bolts (about $35) then you would have a complete lift kit. The only reason I'm changing the springs is I don't like how ruff it rides with them on. Lower Michigan has the worst roads in the country and I can hardly keep my Blazer on the road, so I thought I would try some springs that everyone claims ride better.

**BAD4X4** · 06-17-2005, 10:59 PM

Orange,what kind of springs are they?

orange72blazer · 06-18-2005, 07:53 AM

Rough Country.

toolpimp · 06-18-2005, 12:15 PM

Ryanroo, id be interested in your 8" lift , of course if its still for sale.p.m. me or tool_pimp@hotmail.com. I have a 70 3/4 ton 4x4 with dana 44/60 setup.

**BAD4X4** · 06-18-2005, 12:24 PM

Orange I think the name says it all ROUGH rideing. I will have to pass on the springs I want a whole complete kit. I guess I will have to go back to evil-bay. Thanx Dana

muddyole 69 · 06-19-2005, 01:33 AM

I bought a dick cepek kit advertised as 5 inch from davy's in Tenn fit up good rides great got is for like 365 shipped said no drop arm required

I would get one it looked kinda spooky with the stock setup my 2 cents drop arm is money well spent hope this helps Mike

**BAD4X4** · 06-26-2005, 08:55 PM

Ttt

06-13-2005, 05:34 PM	#1
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	WTB : 4"-6" lift kit for 67-72 I'm looking for a good 4-6" lift kit for my new 1972 k20. I would like a good used one. I don't want to spend alot of money on a work truck.Thanx for the help. Dana __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

06-13-2005, 05:51 PM	#2
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	i have an 8 inch all spring kit that is still on the truck(been setting for about 3 years) with like 250 miles on it. considering selling it. Ryan __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

06-13-2005, 09:35 PM	#3
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	Didn't really wanna go that big, but I will think about it. Do you have any pics of the kit on the truck and pics of under the truck. Thanx Dana __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

06-14-2005, 05:45 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Hey Ryan,how much dinero? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-14-2005, 10:24 PM	#5
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	i have a few pictures, but not on thiscomputer, i could get some if you wanted. for all four springs and a drop draglink and raised steering arm (71/72 d44 only) i would like to get like 550 dollars plus the cost of shipping from 50801. i paid over 1300 when i bought it, but that was with shocks and brake lines. i will keep the lines and the shocks are ruined from setting without use for to long. this is still on the truck and i would have to have time to remove it and get new springs for it as well. Thanks Ryan __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions Last edited by ryanroo; 06-14-2005 at 10:26 PM.

06-16-2005, 08:23 PM	#6
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	I know when I didn't need a lift a couple weeks ago there was a ton for sale, just my luck............... __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

06-17-2005, 08:16 AM	#7
orange72blazer Registered User Join Date: Dec 2003 Location: West Michigan Posts: 447	I'll have some 4" front springs for sale in a couple of days. They have about 250 miles on them. I'm asking $100 for them plus shipping. I plan on putting my new springs on this weekend.

06-17-2005, 07:48 PM	#8
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	Orange is that just for the front springs? Why are you changring out? Thanx Dana __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

06-17-2005, 10:02 PM	#9
orange72blazer Registered User Join Date: Dec 2003 Location: West Michigan Posts: 447	Yes its just the front springs. You would have to buy blocks for the rear($38) , and u bolts (about $35) then you would have a complete lift kit. The only reason I'm changing the springs is I don't like how ruff it rides with them on. Lower Michigan has the worst roads in the country and I can hardly keep my Blazer on the road, so I thought I would try some springs that everyone claims ride better.

06-17-2005, 10:59 PM	#10
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	Orange,what kind of springs are they? __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

06-18-2005, 07:53 AM	#11
orange72blazer Registered User Join Date: Dec 2003 Location: West Michigan Posts: 447	Rough Country.

06-18-2005, 12:15 PM	#12
toolpimp too many toys Join Date: Oct 2004 Location: winnipeg sorta Posts: 63	wtb spring lift Ryanroo, id be interested in your 8" lift , of course if its still for sale.p.m. me or tool_pimp@hotmail.com. I have a 70 3/4 ton 4x4 with dana 44/60 setup. __________________ if we were all fatter we'd be closer together 1971 gmc 3/4 4x4 383 stroked 1968 1/2 2nd owner 4bbl 6cyl 1969 gmc 3/4 4 sale 350 4bbl 4spd 1969 chev 1/2 lowered 5 spd 454 4bbl 1947 chev coupe 2002 harley flhtcui 6 -67-72 my parts

06-18-2005, 12:24 PM	#13
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	Orange I think the name says it all ROUGH rideing. I will have to pass on the springs I want a whole complete kit. I guess I will have to go back to evil-bay. Thanx Dana __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

06-19-2005, 01:33 AM	#14
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	lift I bought a dick cepek kit advertised as 5 inch from davy's in Tenn fit up good rides great got is for like 365 shipped said no drop arm required I would get one it looked kinda spooky with the stock setup my 2 cents drop arm is money well spent hope this helps Mike __________________ hav'n fun be'n me

06-26-2005, 08:55 PM	#15
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	Ttt __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.