Look what Mr. FedEx brought me today !! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70GMCer · 06-14-2005, 06:23 PM

Fresh from "Jet-Hot Coating".........can't wait to put them on.......

ne:

*chevytruckfan* · 06-14-2005, 06:31 PM

Sweet, I just got my exhaust kit from LMC today also. I wasn't ready to do a custom exhaust behind headers yet because Im not sure when how long I will wait to swap the engine then headers.

72MARIO · 06-14-2005, 07:09 PM

Nice. Headmans right ? Thay look Awesome.

I just installed my headman chevelle shortys I got the painted ones blasted the packaging paint off and used flame proof paint by VHT. Just till I can afford the Jet Hot Job. It's a great product.

70GMCer · 06-14-2005, 08:08 PM

Yep...they are Hedmans.....I really should not have had this done, as I have other parts I have to buy yet. But I figured, do it right now, and don't worry about it down the road......Money well spent, I hope !!

70c10 · 06-14-2005, 10:47 PM

Did you ship those to Jet Hot to get coated?

*Randy70C-10* · 06-14-2005, 11:16 PM

Nice!

GlennBrittain · 06-14-2005, 11:24 PM

I need to replace a cheep set that I started with, let us know how these fit.

tomatocity · 06-15-2005, 01:50 AM

Quote:

Originally Posted by 70GMCer

Fresh from "Jet-Hot Coating".........can't wait to put them on.......

ne:

Sweet! After you finish the installation, wipe them clean (windex then clear water) before you start the engine. This will prevent unnecessary spotting. What are you using for gaskets, bolts, lock waskers? Big Block intake manifold bolts fit the small block exhaust manifold bolt holes very well. They will grab more thread than the standard length bolts. Do you already have a 2.5" exhaust system inplace? "Performance, hell yeah; Looks, for sure!"

70GMCer · 06-15-2005, 06:04 AM

Yes, 70c10, I bought these off Summit and then shipped them to Jet-Hot......Tokk 1 week to get them back......

70GMCer · 06-15-2005, 06:07 AM

Thanks for that info "tomatocity" I didn't know that about the cleaning and the bolts. I'm not going to install these until I start the new rebuilt 350. I'm using "Ram Horns" and 2" exhuast right now. After the breakin on the motor, I plan on installing the headers and new 2 1/4" exhuast......

steve

70c10 · 06-15-2005, 07:16 AM

They sure turned out nice!. Can't wait to see the completed engine. Jerry's Chevrolet on Joppa Road is having a show on July 23rd I'm planning to attend. You should bring your truck.

70GMCer · 06-15-2005, 05:48 PM

This truck is not going to be ready for any showing for a while. I'm going thru the whole thing. Drive train 1st, then body and paint.......I still might go there and see what shows up.....thanks for letting me know.....

steve

**special-K** · 06-15-2005, 08:53 PM

If you don`t mind me asking,what does that cost including shipping?

R@nger · 06-16-2005, 05:03 AM

Thats nice 70gmcer!..I have those exact same headers and I got them from summit, and I'm now wishing I would have gotten them coated

. They aren't rusting bad just kinda discolored..brownish rusty looking.

70GMCer · 06-16-2005, 06:11 AM

I bought these from Summit for about $134.00 shipped. I had to pay another $12.00 FedEx Shipping to Jet-Hot. Fet-Hot charged me $279.00 including shipping to me. Was about 1 week turn around to get them back. They also say they do used headers with the same result. Go to their web site and they will give you a quote. It's a little costly, but I think worth it in the long run. Their warranty is great.......

http://www.jet-hot.com/

70c10 · 06-16-2005, 07:19 AM

I just went to the website but couldn't find any warranty info. How long is the warranty?.

70GMCer · 06-16-2005, 05:55 PM

Comes with a "Life Time Rust Through Protection" and a 3 year Guarantee of Satisfaction.......

**special-K** · 06-16-2005, 07:21 PM

It`s so expensive.I wonder why it has to se so high.You paid for three sets of headers,right?I had cheap ones on a`71 for 12 years.They never were even painted`cause they got thrown on in Flagstaff,AZ when one of my rams horns blew-out.I`m not knocking the product.I`ve had mine done on my GMC.Maryland Performance Coatings did it:bead-blast,flat black,silver,then flat black again.All coats ceramic.I threw in an old set they just blasted and coated flat black to keep it cheap.

06-14-2005, 06:23 PM	#1
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Look what Mr. FedEx brought me today !! Fresh from "Jet-Hot Coating".........can't wait to put them on....... ne: Attached Images __________________ 1997 GMC Sierra Ext 1965 Mustang

06-14-2005, 07:09 PM	#3
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	Nice. Headmans right ? Thay look Awesome. I just installed my headman chevelle shortys I got the painted ones blasted the packaging paint off and used flame proof paint by VHT. Just till I can afford the Jet Hot Job. It's a great product. __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

06-14-2005, 08:08 PM	#4
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Yep...they are Hedmans.....I really should not have had this done, as I have other parts I have to buy yet. But I figured, do it right now, and don't worry about it down the road......Money well spent, I hope !! __________________ 1997 GMC Sierra Ext 1965 Mustang

06-14-2005, 10:47 PM	#5
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Did you ship those to Jet Hot to get coated? __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

06-15-2005, 06:04 AM	#9
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Yes, 70c10, I bought these off Summit and then shipped them to Jet-Hot......Tokk 1 week to get them back...... __________________ 1997 GMC Sierra Ext 1965 Mustang

06-14-2005, 06:31 PM	#2
chevytruckfan Account Suspended Join Date: May 2004 Location: Lake Placid, Florida Posts: 930	Sweet, I just got my exhaust kit from LMC today also. I wasn't ready to do a custom exhaust behind headers yet because Im not sure when how long I will wait to swap the engine then headers.

06-14-2005, 11:16 PM	#6
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Nice!

06-14-2005, 11:24 PM	#7
GlennBrittain Senior Member Join Date: Jun 2003 Location: Panola County Texas Posts: 401	I need to replace a cheep set that I started with, let us know how these fit.

06-15-2005, 06:07 AM	#10
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Thanks for that info "tomatocity" I didn't know that about the cleaning and the bolts. I'm not going to install these until I start the new rebuilt 350. I'm using "Ram Horns" and 2" exhuast right now. After the breakin on the motor, I plan on installing the headers and new 2 1/4" exhuast...... steve __________________ 1997 GMC Sierra Ext 1965 Mustang

06-15-2005, 07:16 AM	#11
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	They sure turned out nice!. Can't wait to see the completed engine. Jerry's Chevrolet on Joppa Road is having a show on July 23rd I'm planning to attend. You should bring your truck. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

06-15-2005, 05:48 PM	#12
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	This truck is not going to be ready for any showing for a while. I'm going thru the whole thing. Drive train 1st, then body and paint.......I still might go there and see what shows up.....thanks for letting me know..... steve __________________ 1997 GMC Sierra Ext 1965 Mustang

06-15-2005, 08:53 PM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	If you don`t mind me asking,what does that cost including shipping? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-16-2005, 05:03 AM	#14
R@nger Psalm 23 Join Date: Apr 2005 Location: Utah Posts: 360	Thats nice 70gmcer!..I have those exact same headers and I got them from summit, and I'm now wishing I would have gotten them coated . They aren't rusting bad just kinda discolored..brownish rusty looking. __________________ 71 GMC Fleetside C15(cab), 3/4 ton, 350, Holley Street Avenger 570cfm carb, TH350 trans, Leaf-springs, 2WD. "Peter are you sleeping on the job? No I have a bug in my eye and I'm trying to suffocate him." - Family Guy

06-16-2005, 06:11 AM	#15
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	I bought these from Summit for about $134.00 shipped. I had to pay another $12.00 FedEx Shipping to Jet-Hot. Fet-Hot charged me $279.00 including shipping to me. Was about 1 week turn around to get them back. They also say they do used headers with the same result. Go to their web site and they will give you a quote. It's a little costly, but I think worth it in the long run. Their warranty is great....... http://www.jet-hot.com/ __________________ 1997 GMC Sierra Ext 1965 Mustang

06-16-2005, 07:19 AM	#16
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	I just went to the website but couldn't find any warranty info. How long is the warranty?. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads



Register or Log In To remove these advertisements.

06-16-2005, 05:55 PM	#17
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Comes with a "Life Time Rust Through Protection" and a 3 year Guarantee of Satisfaction....... __________________ 1997 GMC Sierra Ext 1965 Mustang

06-16-2005, 07:21 PM	#18
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	It`s so expensive.I wonder why it has to se so high.You paid for three sets of headers,right?I had cheap ones on a`71 for 12 years.They never were even painted`cause they got thrown on in Flagstaff,AZ when one of my rams horns blew-out.I`m not knocking the product.I`ve had mine done on my GMC.Maryland Performance Coatings did it:bead-blast,flat black,silver,then flat black again.All coats ceramic.I threw in an old set they just blasted and coated flat black to keep it cheap. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Register or Log In To remove these advertisements.