F/s Restored Tach Dash - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PT'S 70 CST · 06-21-2005, 11:30 AM

This is a dash that I had sold to a board member and something came up and he could not get it. This is a run down of what was done to this dash. All of the needles were repainted, all of the tins were media blasted and painted, the inner tin was painted white to help with the lighting, the gas, speedo, and tach plates were cleaned and clear coated, it has a new after market temp gauge and all new bulbs a new bezel, all of the nuts and bolts are either new or have been polished.The speedometer set back to zero. This is a very nice dash 375.00 shipped

PT

jtminton · 06-21-2005, 11:48 AM

Sorry to hijack the thread, but I had a question. On that temp gauge, looking at the back, what wire is the 12v and what wire goes to the sender? Are the other studs just structural?

Thanks, if I was in the market for a new tach dash, I'd buy yours. You'll at least get a bump out of this!

PT'S 70 CST · 06-21-2005, 08:37 PM

The temp gauge has a built in resistor and hooks up just as a factory one would only without the factory resistor.

PT

PT'S 70 CST · 06-22-2005, 04:22 PM

TTT and away to ebay

PT'S 70 CST · 06-23-2005, 12:04 AM

One more bump 365.00 shipped

PT'S 70 CST · 06-25-2005, 10:11 AM

I still have not listed it on ebay yet. This is a very nice dash for the price.

PT

tomatocity · 06-26-2005, 12:32 AM

Is there a seal between the gauge and the bezel? I don't know how these are constructed but I was reading another builders remarks about his products and he mentioned using a seal between the gauge and the bezel. Would the seal prevent dust and moisture plus reduce vibration?

Quote:

Originally Posted by PT'S 70 CST

I still have not listed it on ebay yet. This is a very nice dash for the price.

PT

PT'S 70 CST · 06-26-2005, 09:54 AM

No it is not a seal, it is little 1" rubber grommets that are in 6 spots or so that keep the lens tight between the bezel and the backing plate. The little 1" pieces lay in the bezel and the lens lays down on top of the rubber grommets. I think GM did this more so that the lens would not crack and it would reduce vibration, but I think that over the years you would still get some amount of dust in them. It would be nice if someone came up with a gasket of some sort that went completly around the lens

PT

PT'S 70 CST · 07-13-2005, 07:10 PM

345.00 Shipped gotta go

PT

QKENUF4U · 07-13-2005, 10:07 PM

can i use a tach dash in a NON-TACH dash truck ???? im gonna have a 67-72 before too long hopefully and this would be a nice start to my driver/resto project.
thanks
lance

Roberty · 07-13-2005, 10:18 PM

Quote:

Originally Posted by QKENUF4U

can i use a tach dash in a NON-TACH dash truck ???? im gonna have a 67-72 before too long hopefully and this would be a nice start to my driver/resto project.
thanks
lance

Only thing that you will need is a repo Tach harness. The printed circuit is different on the tach cluster and takes care of the rest.

PT'S 70 CST · 07-13-2005, 10:58 PM

I can make a harness for you if you want the dash, if you are going to be running an HEI dizzy one wire goes to the dizzy and one goes to 12 volts. You can buy a repo one for about 18.00 bucks if you wish to go original.

PT

PT'S 70 CST · 07-14-2005, 01:52 PM

ttt

jamesi20 · 07-14-2005, 08:33 PM

do you take paypal?

PT'S 70 CST · 07-14-2005, 09:35 PM

Yes I do Dawgsfan227@cs.com

PT'S 70 CST · 07-15-2005, 05:02 PM

Ttt

PT'S 70 CST · 07-15-2005, 09:11 PM

SOLD Vortexofpain

06-21-2005, 11:30 AM	#1
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	F/s Restored Tach Dash This is a dash that I had sold to a board member and something came up and he could not get it. This is a run down of what was done to this dash. All of the needles were repainted, all of the tins were media blasted and painted, the inner tin was painted white to help with the lighting, the gas, speedo, and tach plates were cleaned and clear coated, it has a new after market temp gauge and all new bulbs a new bezel, all of the nuts and bolts are either new or have been polished.The speedometer set back to zero. This is a very nice dash 375.00 shipped PT Attached Images __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

06-21-2005, 11:48 AM	#2
jtminton II Timothy 4:2 Join Date: Mar 2005 Location: Fort Worth Posts: 361	Sorry to hijack the thread, but I had a question. On that temp gauge, looking at the back, what wire is the 12v and what wire goes to the sender? Are the other studs just structural? Thanks, if I was in the market for a new tach dash, I'd buy yours. You'll at least get a bump out of this! __________________ 72 C-20 2WD LWB Custom Camper Deluxe 350 4 Speed "Project Lazarus" MY TRUE PRIDE AND JOY "Dangit, Bobby, people will see that oil stain and think I'm a drunk."

06-21-2005, 08:37 PM	#3
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	The temp gauge has a built in resistor and hooks up just as a factory one would only without the factory resistor. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

06-22-2005, 04:22 PM	#4
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	TTT and away to ebay __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

06-23-2005, 12:04 AM	#5
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	One more bump 365.00 shipped __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

06-25-2005, 10:11 AM	#6
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	I still have not listed it on ebay yet. This is a very nice dash for the price. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

06-26-2005, 09:54 AM	#8
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	No it is not a seal, it is little 1" rubber grommets that are in 6 spots or so that keep the lens tight between the bezel and the backing plate. The little 1" pieces lay in the bezel and the lens lays down on top of the rubber grommets. I think GM did this more so that the lens would not crack and it would reduce vibration, but I think that over the years you would still get some amount of dust in them. It would be nice if someone came up with a gasket of some sort that went completly around the lens PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops Last edited by PT'S 70 CST; 06-26-2005 at 09:59 AM.

07-13-2005, 07:10 PM	#9
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	345.00 Shipped gotta go PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

07-13-2005, 10:07 PM	#10
QKENUF4U Senior Member Join Date: Jan 2005 Location: SUNNY WARM BIKE RIDING COTTONWOOD ARIZONA Posts: 2,097	can i use a tach dash in a NON-TACH dash truck ???? im gonna have a 67-72 before too long hopefully and this would be a nice start to my driver/resto project. thanks lance

07-13-2005, 10:58 PM	#12
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	I can make a harness for you if you want the dash, if you are going to be running an HEI dizzy one wire goes to the dizzy and one goes to 12 volts. You can buy a repo one for about 18.00 bucks if you wish to go original. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

07-14-2005, 01:52 PM	#13
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	ttt __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

07-14-2005, 08:33 PM	#14
jamesi20 Senior Member Join Date: May 2002 Location: NORTHEAST OHIO Posts: 493	do you take paypal?

07-14-2005, 09:35 PM	#15
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Yes I do Dawgsfan227@cs.com __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

07-15-2005, 05:02 PM	#16
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Ttt __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

07-15-2005, 09:11 PM	#17
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	SOLD Vortexofpain __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.